diff mbox series

[v3,1/5] rk3399: spl: Add rk_spl_board_init as __weak

Message ID 20200608183144.26809-2-jagan@amarulasolutions.com
State New
Headers show
Series roc-rk3399-pc: Custom SPL init | expand

Commit Message

Jagan Teki June 8, 2020, 6:31 p.m. UTC 
Current spl_board_init is mostly specific to puma-rk3399
target and in other words it cannot be required or useful
for other rk3399 boards.

Some boards require their custom initialization to be part
of spl_board_init like roc-rk3399-pc require leds setup,
environments.

So, this patch handles all these possible scenarios.
Add rk_spl_board_init as __weak so that boards that require
their own custom initialization can be defined on their
board file.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil at amarulasolutions.com>
---
Changes for v3:
- new patch

 arch/arm/mach-rockchip/rk3399/rk3399.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index 4fda93b152..681f80f339 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -241,7 +241,7 @@  static void rk3399_force_power_on_reset(void)
 }
 #endif
 
-void spl_board_init(void)
+__weak void rk_spl_board_init(void)
 {
 #if defined(SPL_GPIO_SUPPORT)
 	struct rockchip_cru *cru = rockchip_get_cru();
@@ -274,4 +274,11 @@  void spl_board_init(void)
 		debug("%s: Cannot enable boot on regulator\n", __func__);
 #endif
 }
+
+void spl_board_init(void)
+{
+	/* board specific spl init */
+	rk_spl_board_init();
+}
+
 #endif