diff mbox series

ARM: da850-evm: Remove SPI from SPL when booting from NAND

Message ID 20200612021910.45438-1-aford173@gmail.com
State Accepted
Commit c0a8d6e1e67cc7feee5c9e6c7e8c13bb953734f1
Headers show
Series ARM: da850-evm: Remove SPI from SPL when booting from NAND | expand

Commit Message

Adam Ford June 12, 2020, 2:19 a.m. UTC 
The da850evm boots from SPI flash while the da850evm_nand_defconfig
boots from NAND and these are configs are mutually exclusive.

Since there isn't a need for SPI during SPL in the NAND configuration,
this patch removes the SPI drivers in SPL while making them still
available in U-Boot proper.  This should save some code space in SPL.

Signed-off-by: Adam Ford <aford173 at gmail.com>
diff mbox series

Patch

diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index bc2c0a2c25..179a1782c6 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -9,12 +9,9 @@  CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x800
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x0
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x8000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_TEXT_BASE=0x80000000
 CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
 CONFIG_BOOTDELAY=3
@@ -27,7 +24,6 @@  CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_SPI_LOAD=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_CRC32_VERIFY=y