diff mbox series

[01/16] cl-som-imx7: Switch to DM_SPI/DM_SPI_FLASH

Message ID 20200613135455.181483-2-jagan@amarulasolutions.com
State New
Headers show
Series spi: dm-conversion (part3) | expand

Commit Message

Jagan Teki June 13, 2020, 1:54 p.m. UTC
Enable DM_SPI/DM_SPI_FLASH with associated config
options.

Build fine, but not tested.

Patch-cc: Uri Mashiach <uri.mashiach at compulab.co.il>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 configs/cl-som-imx7_defconfig | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

Comments

Jagan Teki Oct. 23, 2020, 8:28 a.m. UTC | #1
On Sat, Jun 13, 2020 at 7:25 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>

> Enable DM_SPI/DM_SPI_FLASH with associated config

> options.

>

> Build fine, but not tested.

>

> Patch-cc: Uri Mashiach <uri.mashiach@compulab.co.il>

> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

> ---


Applied to u-boot-spi/master
diff mbox series

Patch

diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig
index a38c6c2429..12018cc1b0 100644
--- a/configs/cl-som-imx7_defconfig
+++ b/configs/cl-som-imx7_defconfig
@@ -7,6 +7,7 @@  CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DM_GPIO=y
 CONFIG_TARGET_CL_SOM_IMX7=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -41,7 +42,6 @@  CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -54,16 +54,18 @@  CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
 # CONFIG_ENV_IS_IN_MMC is not set
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM=y
 CONFIG_CMD_PCA953X=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_ATMEL=y
@@ -79,6 +81,7 @@  CONFIG_PHY_ATHEROS=y
 CONFIG_MII=y
 CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y