Message ID | 20200613205717.v2.33.Ib6ee37195cb6d64579710219bae87005cc61d61f@changeid |
---|---|
State | Accepted |
Commit | 42b18df80fdbbafc50b039201769b154b3ae533b |
Headers | show |
Series | rockchip: x86: Support building ROM files automatically with binman | expand |
Hi Simon, On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg at chromium.org> wrote: > > On x86 various files that need to be created by binman. It does not make > sense to enumerate these in the Makefile. They are described in the > configuration (devicetree) for each board and we can simply run binman > (always) to generate them. > > Update the Makefile to have a separate, final step which runs binman, > once all input dependencies are present. > > This avoid sprinkling the Makefile with arch-specific code. > > Signed-off-by: Simon Glass <sjg at chromium.org> > --- > > (no changes since v1) > > Makefile | 63 ++++++++----------------------- > arch/arm/dts/rockchip-u-boot.dtsi | 2 + > 2 files changed, 17 insertions(+), 48 deletions(-) > > diff --git a/Makefile b/Makefile > index 875fbb1f1f..9c15dced7d 100644 > --- a/Makefile > +++ b/Makefile > @@ -916,16 +916,6 @@ INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf > INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi > INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi > > -ifneq ($(CONFIG_HAS_ROM),) > -ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),) > -INPUTS-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom > -endif > -endif > - > -ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy) > -INPUTS-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin > -endif > - > # Build a combined spl + u-boot image for sunxi > ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy) > INPUTS-y += u-boot-sunxi-with-spl.bin > @@ -953,9 +943,13 @@ INPUTS-y += u-boot-with-dtb.bin > endif > > ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) > -INPUTS-y += u-boot-rockchip.bin > +INPUTS-y += u-boot-rockchip.bin idbloader.img This change should not belong to this commit > endif > > +INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \ > + $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \ > + $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) > + > LDFLAGS_u-boot += $(LDFLAGS_FINAL) > > # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. > @@ -1013,7 +1007,14 @@ cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \ > PHONY += inputs > inputs: $(INPUTS-y) > > -all: inputs > +all: .binman_stamp inputs > +ifeq ($(CONFIG_BINMAN),y) > + $(call if_changed,binman) > +endif > + > +# Timestamp file to make sure that binman always runs > +.binman_stamp: FORCE > + @touch $@ > > ifeq ($(CONFIG_DEPRECATED),y) > $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.") > @@ -1306,7 +1307,7 @@ quiet_cmd_binman = BINMAN $@ > cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ > --toolpath $(objtree)/tools \ > $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \ > - build -u -d u-boot.dtb -O . -m \ > + build -u -d u-boot.dtb -O . -m --allow-missing \ > -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \ > $(BINMAN_$(@F)) > > @@ -1583,27 +1584,11 @@ u-boot-br.bin: u-boot FORCE > endif > endif > > -# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including > -# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in > -# the middle. This is handled by binman based on an image description in the > -# board's device tree. > -ifneq ($(CONFIG_HAS_ROM),) > -rom: u-boot.rom FORCE > - > -refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE > - $(call if_changed,copy) > - > quiet_cmd_ldr = LD $@ > cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \ > $(filter-out FORCE,$^) -o $@ > > -rom-deps := u-boot.bin > ifdef CONFIG_X86 > -rom-deps += u-boot-x86-start16.bin u-boot-x86-reset16.bin \ > - $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \ > - $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \ > - $(if $(CONFIG_HAVE_REFCODE),refcode.bin) > - > OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16 > u-boot-x86-start16.bin: u-boot FORCE > $(call if_changed,objcopy) > @@ -1612,22 +1597,7 @@ OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec > u-boot-x86-reset16.bin: u-boot FORCE > $(call if_changed,objcopy) > > -else # !CONFIG_X86 > - > -ifdef CONFIG_SPL > -rom-deps += spl/u-boot-spl.bin > -rom-deps += u-boot.img > -endif > - > -ifdef CONFIG_TPL > -rom-deps += tpl/u-boot-tpl.bin > -endif > - > -endif > - > -u-boot.rom: $(rom-deps) FORCE > - $(call if_changed,binman) > -endif > +endif # CONFIG_X86 > > ifneq ($(CONFIG_ARCH_SUNXI),) > ifeq ($(CONFIG_ARM64),) > @@ -1639,9 +1609,6 @@ u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE > endif > endif > > -u-boot-x86-with-spl.bin: spl/u-boot-spl.bin u-boot.bin FORCE > - $(call if_changed,binman) > - > ifneq ($(CONFIG_ARCH_TEGRA),) > # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin > %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: spl/%-spl %.bin FORCE > diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi > index 0451db735e..eae3ee715d 100644 > --- a/arch/arm/dts/rockchip-u-boot.dtsi > +++ b/arch/arm/dts/rockchip-u-boot.dtsi > @@ -11,6 +11,7 @@ > }; > }; > > +#ifdef CONFIG_SPL This change should not belong to this commit > &binman { > simple-bin { > filename = "u-boot-rockchip.bin"; > @@ -25,3 +26,4 @@ > }; > }; > }; > +#endif > -- Regards, Bin
diff --git a/Makefile b/Makefile index 875fbb1f1f..9c15dced7d 100644 --- a/Makefile +++ b/Makefile @@ -916,16 +916,6 @@ INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi -ifneq ($(CONFIG_HAS_ROM),) -ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),) -INPUTS-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom -endif -endif - -ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy) -INPUTS-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin -endif - # Build a combined spl + u-boot image for sunxi ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy) INPUTS-y += u-boot-sunxi-with-spl.bin @@ -953,9 +943,13 @@ INPUTS-y += u-boot-with-dtb.bin endif ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) -INPUTS-y += u-boot-rockchip.bin +INPUTS-y += u-boot-rockchip.bin idbloader.img endif +INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \ + $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \ + $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) + LDFLAGS_u-boot += $(LDFLAGS_FINAL) # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. @@ -1013,7 +1007,14 @@ cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \ PHONY += inputs inputs: $(INPUTS-y) -all: inputs +all: .binman_stamp inputs +ifeq ($(CONFIG_BINMAN),y) + $(call if_changed,binman) +endif + +# Timestamp file to make sure that binman always runs +.binman_stamp: FORCE + @touch $@ ifeq ($(CONFIG_DEPRECATED),y) $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.") @@ -1306,7 +1307,7 @@ quiet_cmd_binman = BINMAN $@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ --toolpath $(objtree)/tools \ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \ - build -u -d u-boot.dtb -O . -m \ + build -u -d u-boot.dtb -O . -m --allow-missing \ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \ $(BINMAN_$(@F)) @@ -1583,27 +1584,11 @@ u-boot-br.bin: u-boot FORCE endif endif -# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including -# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in -# the middle. This is handled by binman based on an image description in the -# board's device tree. -ifneq ($(CONFIG_HAS_ROM),) -rom: u-boot.rom FORCE - -refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE - $(call if_changed,copy) - quiet_cmd_ldr = LD $@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \ $(filter-out FORCE,$^) -o $@ -rom-deps := u-boot.bin ifdef CONFIG_X86 -rom-deps += u-boot-x86-start16.bin u-boot-x86-reset16.bin \ - $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \ - $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \ - $(if $(CONFIG_HAVE_REFCODE),refcode.bin) - OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16 u-boot-x86-start16.bin: u-boot FORCE $(call if_changed,objcopy) @@ -1612,22 +1597,7 @@ OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec u-boot-x86-reset16.bin: u-boot FORCE $(call if_changed,objcopy) -else # !CONFIG_X86 - -ifdef CONFIG_SPL -rom-deps += spl/u-boot-spl.bin -rom-deps += u-boot.img -endif - -ifdef CONFIG_TPL -rom-deps += tpl/u-boot-tpl.bin -endif - -endif - -u-boot.rom: $(rom-deps) FORCE - $(call if_changed,binman) -endif +endif # CONFIG_X86 ifneq ($(CONFIG_ARCH_SUNXI),) ifeq ($(CONFIG_ARM64),) @@ -1639,9 +1609,6 @@ u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE endif endif -u-boot-x86-with-spl.bin: spl/u-boot-spl.bin u-boot.bin FORCE - $(call if_changed,binman) - ifneq ($(CONFIG_ARCH_TEGRA),) # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: spl/%-spl %.bin FORCE diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi index 0451db735e..eae3ee715d 100644 --- a/arch/arm/dts/rockchip-u-boot.dtsi +++ b/arch/arm/dts/rockchip-u-boot.dtsi @@ -11,6 +11,7 @@ }; }; +#ifdef CONFIG_SPL &binman { simple-bin { filename = "u-boot-rockchip.bin"; @@ -25,3 +26,4 @@ }; }; }; +#endif
On x86 various files that need to be created by binman. It does not make sense to enumerate these in the Makefile. They are described in the configuration (devicetree) for each board and we can simply run binman (always) to generate them. Update the Makefile to have a separate, final step which runs binman, once all input dependencies are present. This avoid sprinkling the Makefile with arch-specific code. Signed-off-by: Simon Glass <sjg at chromium.org> --- (no changes since v1) Makefile | 63 ++++++++----------------------- arch/arm/dts/rockchip-u-boot.dtsi | 2 + 2 files changed, 17 insertions(+), 48 deletions(-)