@@ -685,6 +685,7 @@ M: Priyanka Jain <priyanka.jain at nxp.com>
S: Maintained
T: git https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git
F: drivers/watchdog/sp805_wdt.c
+F: drivers/watchdog/sbsa_gwdt.c
I2C
M: Heiko Schocher <hs at denx.de>
@@ -163,6 +163,15 @@ config WDT_SANDBOX
can be probed and supports all of the methods of WDT, but does not
really do anything.
+config WDT_SBSA
+ bool "SBSA watchdog timer support"
+ depends on WDT
+ help
+ Select this to enable SBSA watchdog timer.
+ This driver can operate ARM SBSA Generic Watchdog as a single stage.
+ In the single stage mode, when the timeout is reached, your system
+ will be reset by WS1. The first signal (WS0) is ignored.
+
config WDT_SP805
bool "SP805 watchdog timer support"
depends on WDT
@@ -27,6 +27,7 @@ obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
+obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o
obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
new file mode 100644
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for SBSA
+ *
+ * Copyright 2020 NXP
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm/device.h>
+#include <dm/fdtaddr.h>
+#include <dm/read.h>
+#include <linux/bitops.h>
+#include <watchdog.h>
+#include <wdt.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* SBSA Generic Watchdog register definitions */
+/* refresh frame */
+#define SBSA_GWDT_WRR 0x000
+
+/* control frame */
+#define SBSA_GWDT_WCS 0x000
+#define SBSA_GWDT_WOR 0x008
+#define SBSA_GWDT_WCV 0x010
+
+/* refresh/control frame */
+#define SBSA_GWDT_W_IIDR 0xfcc
+#define SBSA_GWDT_IDR 0xfd0
+
+/* Watchdog Control and Status Register */
+#define SBSA_GWDT_WCS_EN BIT(0)
+#define SBSA_GWDT_WCS_WS0 BIT(1)
+#define SBSA_GWDT_WCS_WS1 BIT(2)
+
+struct sbsa_gwdt_priv {
+ void __iomem *reg_refresh;
+ void __iomem *reg_control;
+};
+
+static int sbsa_gwdt_reset(struct udevice *dev)
+{
+ struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+
+ writel(0, priv->reg_refresh + SBSA_GWDT_WRR);
+
+ return 0;
+}
+
+static int sbsa_gwdt_start(struct udevice *dev, u64 timeout, ulong flags)
+{
+ struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+ u32 load_value;
+ u32 clk;
+
+ /*
+ * it work in the single stage mode in u-boot,
+ * The first signal (WS0) is ignored,
+ * the timeout is (WOR * 2), so the WOR should be configured
+ * to half value of timeout.
+ */
+ clk = get_tbclk();
+ writel(clk / 2 * timeout,
+ priv->reg_control + SBSA_GWDT_WOR);
+
+ /* writing WCS will cause an explicit watchdog refresh */
+ writel(SBSA_GWDT_WCS_EN, priv->reg_control + SBSA_GWDT_WCS);
+
+ return 0;
+}
+
+static int sbsa_gwdt_stop(struct udevice *dev)
+{
+ struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+
+ writel(0, priv->reg_control + SBSA_GWDT_WCS);
+
+ return 0;
+}
+
+static int sbsa_gwdt_expire_now(struct udevice *dev, ulong flags)
+{
+ sbsa_gwdt_start(dev, 0, flags);
+
+ return 0;
+}
+
+static int sbsa_gwdt_probe(struct udevice *dev)
+{
+ debug("%s: Probing wdt%u (sbsa-gwdt)\n", __func__, dev->seq);
+
+ return 0;
+}
+
+static int sbsa_gwdt_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+
+ priv->reg_control = (void __iomem *)dev_read_addr_index(dev, 0);
+ if (IS_ERR(priv->reg_control))
+ return PTR_ERR(priv->reg_control);
+
+ priv->reg_refresh = (void __iomem *)dev_read_addr_index(dev, 1);
+ if (IS_ERR(priv->reg_refresh))
+ return PTR_ERR(priv->reg_refresh);
+
+ return 0;
+}
+
+static const struct wdt_ops sbsa_gwdt_ops = {
+ .start = sbsa_gwdt_start,
+ .reset = sbsa_gwdt_reset,
+ .stop = sbsa_gwdt_stop,
+ .expire_now = sbsa_gwdt_expire_now,
+};
+
+static const struct udevice_id sbsa_gwdt_ids[] = {
+ { .compatible = "arm,sbsa-gwdt" },
+ {}
+};
+
+U_BOOT_DRIVER(sbsa_gwdt) = {
+ .name = "sbsa_gwdt",
+ .id = UCLASS_WDT,
+ .of_match = sbsa_gwdt_ids,
+ .probe = sbsa_gwdt_probe,
+ .priv_auto_alloc_size = sizeof(struct sbsa_gwdt_priv),
+ .ofdata_to_platdata = sbsa_gwdt_ofdata_to_platdata,
+ .ops = &sbsa_gwdt_ops,
+};