diff mbox series

[2/2] stm32mp1: use the command env info in env_check

Message ID 20200615100246.19616-2-patrick.delaunay@st.com
State Superseded
Headers show
Series [1/2] cmd: env: use ENV_IS_IN_DEVICE in env info | expand

Commit Message

Patrick Delaunay June 15, 2020, 10:02 a.m. UTC
Activate CMD_NVEDIT_INFO and use the new command "env info -d -p -q"
to automatically save the environment on first boot.

This patch allows to remove the env_default variable.



Previously sent in serie
cmd: env: add option for quiet output on env info
http://patchwork.ozlabs.org/project/uboot/list/?series=158105

Resend as separate serie without the "-q" option.

END

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 arch/arm/mach-stm32mp/Kconfig | 1 +
 include/configs/stm32mp1.h    | 4 +---
 2 files changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 6c995ed8d8..478fd2f17d 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -46,6 +46,7 @@  config STM32MP15x
 	select STM32_RESET
 	select STM32_SERIAL
 	select SYS_ARCH_TIMER
+	imply CMD_NVEDIT_INFO
 	imply SYSRESET_PSCI if TFABOOT
 	imply SYSRESET_SYSCON if !TFABOOT
 	help
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index f271b84a59..e927787be0 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -155,9 +155,7 @@ 
 	"splashimage=0xc4300000\0"  \
 	"ramdisk_addr_r=0xc4400000\0" \
 	"altbootcmd=run bootcmd\0" \
-	"env_default=1\0" \
-	"env_check=if test $env_default -eq 1;"\
-		" then env set env_default 0;env save;fi\0" \
+	"env_check=if env info -p -d; then env save; fi\0" \
 	STM32MP_BOOTCMD \
 	BOOTENV \
 	"boot_net_usb_start=true\0"