diff mbox series

[v2,16/17] test/py: add a test for efi firmware update capsule of FIT image

Message ID 20200617025515.23585-17-takahiro.akashi@linaro.org
State New
Headers show
Series efi_loader: add capsule update support | expand

Commit Message

AKASHI Takahiro June 17, 2020, 2:55 a.m. UTC
The test can run on sandbox build and it attempts to execute a firmware
update via a capsule-on-disk, using a FIT image capsule,
CONFIG_EFI_CAPSULE_FIT.

To run this test successfully, you need configure U-Boot specifically;
See test_capsule_firmware.py for requirements, and hence it won't run
on Travis CI.

Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
---
 test/py/tests/test_efi_capsule/conftest.py    | 102 ++++++
 test/py/tests/test_efi_capsule/defs.py        |  24 ++
 .../test_efi_capsule/test_capsule_firmware.py | 308 ++++++++++++++++++
 .../tests/test_efi_capsule/uboot_bin_env.its  |  36 ++
 test/py/tests/test_efi_capsule/uboot_env.its  |  25 ++
 5 files changed, 495 insertions(+)
 create mode 100644 test/py/tests/test_efi_capsule/conftest.py
 create mode 100644 test/py/tests/test_efi_capsule/defs.py
 create mode 100644 test/py/tests/test_efi_capsule/test_capsule_firmware.py
 create mode 100644 test/py/tests/test_efi_capsule/uboot_bin_env.its
 create mode 100644 test/py/tests/test_efi_capsule/uboot_env.its
diff mbox series

Patch

diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py
new file mode 100644
index 000000000000..58daf63f1e52
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/conftest.py
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier:      GPL-2.0+
+# Copyright (c) 2020, Linaro Limited
+# Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
+
+import os
+import os.path
+import re
+from subprocess import call, check_call, check_output, CalledProcessError
+import pytest
+from defs import *
+
+#
+# Fixture for UEFI secure boot test
+#
+
+
+ at pytest.fixture(scope='session')
+def efi_capsule_data(request, u_boot_config):
+    """Set up a file system to be used in UEFI capsule test.
+
+    Args:
+        request: Pytest request object.
+        u_boot_config: U-boot configuration.
+
+    Return:
+        A path to disk image to be used for testing
+    """
+    image_path = u_boot_config.persistent_data_dir
+    image_path = image_path + '/' + EFI_BOOTDEV_IMAGE_NAME
+
+    try:
+        # create U-Boot environment storage
+        check_call('dd if=/dev/zero of=./spi.bin bs=1MiB count=16', shell=True)
+
+        # create a disk/partition
+        check_call('dd if=/dev/zero of=%s bs=1MiB count=%d'
+                   % (image_path, EFI_BOOTDEV_IMAGE_SIZE), shell=True)
+        check_call(
+            'sgdisk %s -n 1:0:+%dMiB -A 1:set:0 -t 1:C12A7328-F81F-11D2-BA4B-00A0C93EC93B' %
+            (image_path, EFI_BOOTDEV_PART_SIZE), shell=True)
+        # create a file system
+        check_call('dd if=/dev/zero of=%s.tmp bs=1MiB count=%d'
+                   % (image_path, EFI_BOOTDEV_PART_SIZE), shell=True)
+        check_call('mkfs -t %s %s.tmp'
+                   % (EFI_BOOTDEV_FS_TYPE, image_path), shell=True)
+        check_call('dd if=%s.tmp of=%s bs=1MiB seek=1 count=%d conv=notrunc'
+                   % (image_path, image_path, 1), shell=True)
+        check_call('rm %s.tmp' % image_path, shell=True)
+        loop_dev = check_output(
+            'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+            (EFI_BOOTDEV_PART_SIZE, image_path), shell=True).decode()
+        check_call('sudo mkdir -p %s' % MNT_PNT, shell=True)
+        check_call('sudo mount -t %s -o umask=000 %s %s'
+                   % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT),
+                   shell=True)
+        check_call('mkdir -p %s%s' % (MNT_PNT, CAPSULE_DATA_DIR), shell=True)
+        check_call(
+            'mkdir -p %s%s' %
+            (MNT_PNT, CAPSULE_INSTALL_DIR), shell=True)
+
+        # Create its'
+        # one region for U-Boot env in FIT image
+        check_call(
+            'sed -e \"s?BINFILE?%s%s/%s?\" %s/test/py/tests/test_efi_capsule/uboot_env.its > %s%s/uboot_env.its' %
+            (MNT_PNT, CAPSULE_DATA_DIR, FW_BIN, u_boot_config.source_dir, MNT_PNT, CAPSULE_DATA_DIR), shell=True)
+
+        # two regions: one for u-boot.bin and the other for u-boot.env
+        check_call(
+            'echo -n u-boot:Old > %s%s/u-boot.bin.old; echo -n u-boot:New > %s%s/u-boot.bin.new; echo -n u-boot-env:Old -> %s%s/u-boot.env.old; echo -n u-boot-env:New > %s%s/u-boot.env.new' %
+            (MNT_PNT,
+             CAPSULE_DATA_DIR,
+             MNT_PNT,
+             CAPSULE_DATA_DIR,
+             MNT_PNT,
+             CAPSULE_DATA_DIR,
+             MNT_PNT,
+             CAPSULE_DATA_DIR),
+            shell=True)
+        check_call(
+            'sed -e \"s?BINFILE1?%s%s/u-boot.bin.new?\" -e \"s?BINFILE2?%s%s/u-boot.env.new?\" %s/test/py/tests/test_efi_capsule/uboot_bin_env.its > %s%s/uboot_bin_env.its' %
+            (MNT_PNT,
+             CAPSULE_DATA_DIR,
+             MNT_PNT,
+             CAPSULE_DATA_DIR,
+             u_boot_config.source_dir,
+             MNT_PNT,
+             CAPSULE_DATA_DIR),
+            shell=True)
+
+        # cleanup
+        call('sudo umount %s' % loop_dev, shell=True)
+        call('sudo losetup -d %s' % loop_dev, shell=True)
+
+    except CalledProcessError as exception:
+        pytest.skip('Setup failed: %s' % exception.cmd)
+        return
+    else:
+        yield image_path
+    finally:
+        call('sudo rm -rf %s' % MNT_PNT, shell=True)
+        #call('rm -f %s' % image_path, shell=True)
+        call('rm -f ./spi.bin', shell=True)
diff --git a/test/py/tests/test_efi_capsule/defs.py b/test/py/tests/test_efi_capsule/defs.py
new file mode 100644
index 000000000000..911883368b27
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/defs.py
@@ -0,0 +1,24 @@ 
+# SPDX-License-Identifier:      GPL-2.0+
+
+# Disk image name
+EFI_BOOTDEV_IMAGE_NAME = 'test_efi_capsule.img'
+
+# Size in MiB
+EFI_BOOTDEV_IMAGE_SIZE = 16
+EFI_BOOTDEV_PART_SIZE = 8
+
+# Partition file system type
+EFI_BOOTDEV_FS_TYPE = 'vfat'
+
+# Mount Point for set-up
+MNT_PNT = '/mnt/test_efi_capsule'
+
+# Owner guid
+GUID = '11111111-2222-3333-4444-123456789abc'
+
+# Directories
+CAPSULE_DATA_DIR = '/EFI/CapsuleTestData'
+CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule'
+
+#
+FW_BIN = 'spi_sf.bin'
diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware.py b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
new file mode 100644
index 000000000000..490dc039d81f
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
@@ -0,0 +1,308 @@ 
+# SPDX-License-Identifier:      GPL-2.0+
+# Copyright (c) 2020, Linaro Limited
+# Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
+#
+# U-Boot UEFI: Firmware Update Test
+
+"""
+This test verifies capsule-on-disk firmware update
+"""
+
+from subprocess import check_call, check_output, CalledProcessError
+import pytest
+from defs import *
+
+
+ at pytest.mark.boardspec('sandbox')
+ at pytest.mark.buildconfigspec('efi_capsule_firmware_fit')
+ at pytest.mark.buildconfigspec('efi_capsule_on_disk')
+ at pytest.mark.buildconfigspec('dfu')
+ at pytest.mark.buildconfigspec('dfu_sf')
+ at pytest.mark.buildconfigspec('env_is_in_spi_flash')
+ at pytest.mark.buildconfigspec('cmd_efidebug')
+ at pytest.mark.buildconfigspec('cmd_fat')
+ at pytest.mark.buildconfigspec('cmd_nvedit_efi')
+ at pytest.mark.buildconfigspec('cmd_saveenv')
+ at pytest.mark.slow
+class TestEfiCapsuleFirmwareFit(object):
+    def test_efi_capsule_fw1(
+            self, u_boot_config, u_boot_console, efi_capsule_data):
+        """
+        Test Case 1 - Update U-Boot environment on SPI Flash
+        """
+        # "-T" (or "-D") is required to enable spi flash on sandbox
+        u_boot_console.restart_uboot_with_flags('-T')
+
+        disk_img = efi_capsule_data
+        with u_boot_console.log.section('Test Case 1-a, before reboot'):
+            output = u_boot_console.run_command_list([
+                'host bind 0 %s' % disk_img,
+                'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
+                'efidebug boot order 1',
+                'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
+                'env set dfu_alt_info sf 0:0=u-boot-env raw 0 0x200000',
+                'env set FW_STATUS This is Old environment',
+                'env print FW_STATUS',
+                'env save'])
+            assert 'Old environment' in ''.join(output)
+
+            output = u_boot_console.run_command_list([
+                'env set FW_STATUS This is New environment',
+                'env export -c 5000000',
+                'fatwrite host 0:1 5000000 %s/%s $filesize'
+                % (CAPSULE_DATA_DIR, FW_BIN),
+                'env set -e -guid 39b68c46-f7fb-441b-b6ec-16b0f69821f3 Capsule0000',
+                'fatls host 0:1 %s' % CAPSULE_DATA_DIR
+            ])
+            assert '%s' % FW_BIN in ''.join(output)
+
+        # create a capsule file
+        try:
+            loop_dev = check_output(
+                'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+                (EFI_BOOTDEV_PART_SIZE, disk_img), shell=True).decode()
+            check_call('sudo mount -t %s -o umask=000 %s %s'
+                       % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT), shell=True)
+            check_call(
+                '%s/tools/mkimage -f %s%s/uboot_env.its %s%s/uboot_env.itb' %
+                (u_boot_config.build_dir,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR),
+                shell=True)
+            check_call(
+                '%s/tools/mkeficapsule --fit %s%s/uboot_env.itb --version 1 --index 1 %s%s/Test01' %
+                (u_boot_config.build_dir,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR,
+                 MNT_PNT,
+                 CAPSULE_INSTALL_DIR),
+                shell=True)
+            check_call('ls %s/%s' % (MNT_PNT, CAPSULE_INSTALL_DIR), shell=True)
+            check_call('sudo umount %s' % loop_dev, shell=True)
+            check_call('sudo losetup -d %s' % loop_dev, shell=True)
+        except CalledProcessError as exception:
+            assert 'failed to create firmware capsule: %s' % exception.cmd
+
+        # reboot
+        u_boot_console.restart_uboot_with_flags('-T')
+
+        capsule_early = u_boot_config.buildconfig.get(
+            'config_efi_capsule_on_disk_early')
+        if not capsule_early:
+            with u_boot_console.log.section('Test Case 1-b, after reboot'):
+                output = u_boot_console.run_command_list([
+                    'host bind 0 %s' % disk_img,
+                    'env print FW_STATUS'])
+                assert 'Old environment' in ''.join(output)
+
+                output = u_boot_console.run_command('fatls host 0:1 %s'
+                                                    % CAPSULE_INSTALL_DIR)
+                assert 'Test01' in output
+
+            # need to run uefi command to initiate capsule handling
+            output = u_boot_console.run_command(
+                'env print -e -all Capsule0000')
+
+            # reboot again
+            u_boot_console.restart_uboot_with_flags('-T')
+
+        with u_boot_console.log.section('Test Case 1-c, after reboot'):
+            output = u_boot_console.run_command_list([
+                'host bind 0 %s' % disk_img,
+                'env print FW_STATUS'])
+            assert 'New environment' in ''.join(output)
+
+            output = u_boot_console.run_command(
+                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR)
+            assert 'Test01' not in output
+
+    def test_efi_capsule_fw2(
+            self, u_boot_config, u_boot_console, efi_capsule_data):
+        """
+        Test Case 2 - Update U-Boot environment on SPI Flash
+                      but with OsIndications unset
+                      No update should happen
+        """
+        # "-T" (or "-D") is required to enable spi flash on sandbox
+        u_boot_console.restart_uboot_with_flags('-T')
+
+        disk_img = efi_capsule_data
+        with u_boot_console.log.section('Test Case 2-a, before reboot'):
+            output = u_boot_console.run_command_list([
+                'host bind 0 %s' % disk_img,
+                'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
+                'efidebug boot order 1',
+                'env set -e OsIndications',
+                'env set dfu_alt_info sf 0:0=u-boot-env raw 0 0x200000',
+                'env set FW_STATUS This is Old environment',
+                'env print FW_STATUS',
+                'env save'])
+            assert 'Old environment' in ''.join(output)
+
+            output = u_boot_console.run_command_list([
+                'env set FW_STATUS This is New environment',
+                'env export -c 5000000',
+                'fatwrite host 0:1 5000000 %s/%s $filesize'
+                % (CAPSULE_DATA_DIR, FW_BIN),
+                'env set -e -guid 39b68c46-f7fb-441b-b6ec-16b0f69821f3 Capsule0000',
+                'fatls host 0:1 %s' % CAPSULE_DATA_DIR
+            ])
+            assert '%s' % FW_BIN in ''.join(output)
+
+        # create a capsule file
+        try:
+            loop_dev = check_output(
+                'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+                (EFI_BOOTDEV_PART_SIZE, disk_img), shell=True).decode()
+            check_call('sudo mount -t %s -o umask=000 %s %s'
+                       % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT), shell=True)
+            check_call(
+                '%s/tools/mkimage -f %s%s/uboot_env.its %s%s/uboot_env.itb' %
+                (u_boot_config.build_dir,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR),
+                shell=True)
+            check_call(
+                '%s/tools/mkeficapsule --fit %s%s/uboot_env.itb --version 1 --index 1 %s%s/Test01' %
+                (u_boot_config.build_dir,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR,
+                 MNT_PNT,
+                 CAPSULE_INSTALL_DIR),
+                shell=True)
+            check_call('ls %s/%s' % (MNT_PNT, CAPSULE_INSTALL_DIR), shell=True)
+            check_call('sudo umount %s' % loop_dev, shell=True)
+            check_call('sudo losetup -d %s' % loop_dev, shell=True)
+        except CalledProcessError as exception:
+            assert 'failed to create firmware capsule: %s' % exception.cmd
+
+        # reboot
+        u_boot_console.restart_uboot_with_flags('-T')
+
+        capsule_early = u_boot_config.buildconfig.get(
+            'config_efi_capsule_on_disk_early')
+        if not capsule_early:
+            with u_boot_console.log.section('Test Case 2-b, after reboot'):
+                output = u_boot_console.run_command_list([
+                    'host bind 0 %s' % disk_img,
+                    'env print FW_STATUS'])
+                assert 'Old environment' in ''.join(output)
+
+                output = u_boot_console.run_command('fatls host 0:1 %s'
+                                                    % CAPSULE_INSTALL_DIR)
+                assert 'Test01' in output
+
+            # need to run uefi command to initiate capsule handling
+            output = u_boot_console.run_command(
+                'env print -e -all Capsule0000')
+
+            # reboot again
+            u_boot_console.restart_uboot_with_flags('-T')
+
+        with u_boot_console.log.section('Test Case 2-c, after reboot'):
+            output = u_boot_console.run_command_list([
+                'host bind 0 %s' % disk_img,
+                'env print FW_STATUS'])
+            assert 'Old environment' in ''.join(output)
+
+            output = u_boot_console.run_command(
+                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR)
+            assert 'Test01' in output
+
+    def test_efi_capsule_fw3(
+            self, u_boot_config, u_boot_console, efi_capsule_data):
+        """
+        Test Case 3 - Update U-Boot and U-Boot environment on SPI Flash
+                      0x100000-0x150000: U-Boot binary (but dummy)
+                      0x150000-0x200000: U-Boot environment (but dummy)
+        """
+        # "-T" (or "-D") is required to enable spi flash on sandbox
+        u_boot_console.restart_uboot_with_flags('-T')
+
+        disk_img = efi_capsule_data
+        with u_boot_console.log.section('Test Case 3-a, before reboot'):
+            output = u_boot_console.run_command_list([
+                'host bind 0 %s' % disk_img,
+                'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
+                'efidebug boot order 1',
+                'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
+                'env set dfu_alt_info sf 0:0=u-boot-bin raw 0x100000 0x50000\;u-boot-env raw 0x150000 0x200000',
+                'env save'])
+
+            # initialize contents
+            output = u_boot_console.run_command_list(
+                ['sf probe 0:0', 'fatload host 0:1 4000000 %s/u-boot.bin.old' %
+                 CAPSULE_DATA_DIR, 'sf write 4000000 100000 10',
+                 'sf read 5000000 100000 10', 'md.b 5000000 10'])
+            assert 'Old' in ''.join(output)
+            output = u_boot_console.run_command_list(
+                ['sf probe 0:0', 'fatload host 0:1 4000000 %s/u-boot.env.old' %
+                 CAPSULE_DATA_DIR, 'sf write 4000000 150000 10',
+                 'sf read 5000000 150000 10', 'md.b 5000000 10'])
+            assert 'Old' in ''.join(output)
+
+        # create a capsule file
+        try:
+            loop_dev = check_output(
+                'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+                (EFI_BOOTDEV_PART_SIZE, disk_img), shell=True).decode()
+            check_call('sudo mount -t %s -o umask=000 %s %s'
+                       % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT), shell=True)
+            check_call(
+                '%s/tools/mkimage -f %s%s/uboot_bin_env.its %s%s/uboot_bin_env.itb' %
+                (u_boot_config.build_dir,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR),
+                shell=True)
+            check_call(
+                '%s/tools/mkeficapsule --fit %s%s/uboot_bin_env.itb --version 1 --index 1 %s%s/Test01' %
+                (u_boot_config.build_dir,
+                 MNT_PNT,
+                 CAPSULE_DATA_DIR,
+                 MNT_PNT,
+                 CAPSULE_INSTALL_DIR),
+                shell=True)
+            check_call('ls -l %s/%s' % (MNT_PNT, CAPSULE_INSTALL_DIR),
+                       shell=True)
+            check_call('sudo umount %s' % loop_dev, shell=True)
+            check_call('sudo losetup -d %s' % loop_dev, shell=True)
+        except CalledProcessError as exception:
+            assert 'failed to create firmware capsule: %s' % exception.cmd
+
+        # reboot
+        u_boot_console.restart_uboot_with_flags('-T')
+
+        capsule_early = u_boot_config.buildconfig.get(
+            'config_efi_capsule_on_disk_early')
+        with u_boot_console.log.section('Test Case 3-b, after reboot'):
+            if not capsule_early:
+                output = u_boot_console.run_command_list([
+                    'host bind 0 %s' % disk_img,
+                    'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
+                assert 'Test01' in ''.join(output)
+
+                # need to run uefi command to initiate capsule handling
+                output = u_boot_console.run_command(
+                    'env print -e -all Capsule0000')
+
+            output = u_boot_console.run_command_list([
+                'host bind 0 %s' % disk_img,
+                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
+            assert 'Test01' not in ''.join(output)
+
+            output = u_boot_console.run_command_list([
+                'sf probe 0:0',
+                'sf read 4000000 100000 10',
+                'md.b 4000000 10'])
+            assert 'u-boot:New' in ''.join(output)
+
+            output = u_boot_console.run_command_list([
+                'sf read 4000000 150000 10',
+                'md.b 4000000 10'])
+            assert 'u-boot-env:New' in ''.join(output)
diff --git a/test/py/tests/test_efi_capsule/uboot_bin_env.its b/test/py/tests/test_efi_capsule/uboot_bin_env.its
new file mode 100644
index 000000000000..31e2f8049f9a
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/uboot_bin_env.its
@@ -0,0 +1,36 @@ 
+/*
+ * Automatic software update for U-Boot
+ * Make sure the flashing addresses ('load' prop) is correct for your board!
+ */
+
+/dts-v1/;
+
+/ {
+	description = "Automatic U-Boot environment update";
+	#address-cells = <2>;
+
+	images {
+		u-boot-bin at 100000 {
+			description = "U-Boot binary on SPI Flash";
+			data = /incbin/("BINFILE1");
+			compression = "none";
+			type = "firmware";
+			arch = "sandbox";
+			load = <0>;
+			hash-1 {
+				algo = "sha1";
+			};
+		};
+		u-boot-env at 150000 {
+			description = "U-Boot environment on SPI Flash";
+			data = /incbin/("BINFILE2");
+			compression = "none";
+			type = "firmware";
+			arch = "sandbox";
+			load = <0>;
+			hash-1 {
+				algo = "sha1";
+			};
+		};
+	};
+};
diff --git a/test/py/tests/test_efi_capsule/uboot_env.its b/test/py/tests/test_efi_capsule/uboot_env.its
new file mode 100644
index 000000000000..8e71892c0fae
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/uboot_env.its
@@ -0,0 +1,25 @@ 
+/*
+ * Automatic software update for U-Boot
+ * Make sure the flashing addresses ('load' prop) is correct for your board!
+ */
+
+/dts-v1/;
+
+/ {
+	description = "Automatic U-Boot environment update";
+	#address-cells = <2>;
+
+	images {
+		u-boot-env at 0 {
+			description = "U-Boot environment on SPI Flash";
+			data = /incbin/("BINFILE");
+			compression = "none";
+			type = "firmware";
+			arch = "sandbox";
+			load = <0>;
+			hash-1 {
+				algo = "sha1";
+			};
+		};
+	};
+};