diff mbox series

[v5,05/17] arm: socfpga: Override 'lowlevel_init' to support ATF

Message ID 1584019434-45856-6-git-send-email-chee.hong.ang@intel.com
State New
Headers show
Series Enable ARM Trusted Firmware for U-Boot | expand

Commit Message

Ang, Chee Hong March 12, 2020, 1:23 p.m. UTC
From: Chee Hong Ang <chee.hong.ang at intel.com>

Override 'lowlevel_init' to make sure secondary CPUs
trapped in ATF instead of SPL. After ATF is initialized,
it will signal the secondary CPUs to jump from SPL to
ATF waiting to be 'activated' by Linux OS via PSCI call.

Signed-off-by: Chee Hong Ang <chee.hong.ang at intel.com>
---
 arch/arm/mach-socfpga/Makefile           |  2 +
 arch/arm/mach-socfpga/lowlevel_init_64.S | 81 ++++++++++++++++++++++++++++++++
 2 files changed, 83 insertions(+)
 create mode 100644 arch/arm/mach-socfpga/lowlevel_init_64.S
diff mbox series

Patch

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 418f543..3758c0a 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -29,6 +29,7 @@  endif
 
 ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
 obj-y	+= clock_manager_s10.o
+obj-y	+= lowlevel_init_64.o
 obj-y	+= mailbox_s10.o
 obj-y	+= misc_s10.o
 obj-y	+= mmu-arm64_s10.o
@@ -41,6 +42,7 @@  endif
 
 ifdef CONFIG_TARGET_SOCFPGA_AGILEX
 obj-y	+= clock_manager_agilex.o
+obj-y	+= lowlevel_init_64.o
 obj-y	+= mailbox_s10.o
 obj-y	+= misc_s10.o
 obj-y	+= mmu-arm64_s10.o
diff --git a/arch/arm/mach-socfpga/lowlevel_init_64.S b/arch/arm/mach-socfpga/lowlevel_init_64.S
new file mode 100644
index 0000000..21402c0
--- /dev/null
+++ b/arch/arm/mach-socfpga/lowlevel_init_64.S
@@ -0,0 +1,81 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+ENTRY(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_SPL_ATF
+	branch_if_slave x0, 2f
+#else
+	branch_if_slave x0, 1f
+#endif
+
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+	b	2f
+
+1:
+#if defined(CONFIG_GICV3)
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	ldr	x0, =GICD_BASE
+	ldr	x1, =GICC_BASE
+	bl	gic_init_secure_percpu
+#endif
+#endif
+
+#ifdef CONFIG_ARMV8_MULTIENTRY
+	branch_if_master x0, x1, 3f
+
+	/*
+	 * Slave should wait for master clearing spin table.
+	 * This sync prevent slaves observing incorrect
+	 * value of spin table and jumping to wrong place.
+	 */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+	ldr	x0, =GICC_BASE
+#endif
+	bl	gic_wait_for_interrupt
+#endif
+
+	/*
+	 * All slaves will enter EL2 and optionally EL1.
+	 */
+	adr	x4, lowlevel_in_el2
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el2
+
+lowlevel_in_el2:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x4, lowlevel_in_el1
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el1
+
+lowlevel_in_el1:
+#endif
+#endif /* CONFIG_ARMV8_MULTIENTRY */
+
+2:
+#ifdef CONFIG_SPL_BUILD
+	ldr	x4, =CPU_RELEASE_ADDR
+	ldr	x5, [x4]
+	cbz	x5, checkslavecpu
+	br	x5
+checkslavecpu:
+	branch_if_slave x0, 2b
+#endif
+
+3:
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)