Message ID | 20200509165624.20791-7-jagan@amarulasolutions.com |
---|---|
State | Superseded |
Headers | show |
Series | rockchip: Add PCIe host support | expand |
On 2020/5/10 ??12:56, Jagan Teki wrote: > Due to board limitation some SSD's would work > on rock960 PCIe M.2 only with 1.8V IO domain. > > So, this patch enables grf io_sel explicitly to > make PCIe/M.2 to work. > > Cc: Tom Cubie <tom at radxa.com> > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> Reviewed-by: Kever Yang <kever.yang at rock-chips.com> Thanks, - Kever > --- > Changes for v3: > - collect mani a-b > - add comments > > board/vamrs/rock960_rk3399/rock960-rk3399.c | 23 +++++++++++++++++++++ > configs/rock960-rk3399_defconfig | 5 +++++ > 2 files changed, 28 insertions(+) > > diff --git a/board/vamrs/rock960_rk3399/rock960-rk3399.c b/board/vamrs/rock960_rk3399/rock960-rk3399.c > index 68a127b9ac..ef1eb2d0b7 100644 > --- a/board/vamrs/rock960_rk3399/rock960-rk3399.c > +++ b/board/vamrs/rock960_rk3399/rock960-rk3399.c > @@ -2,3 +2,26 @@ > /* > * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> > */ > + > +#include <common.h> > +#include <syscon.h> > +#include <asm/io.h> > +#include <asm/arch-rockchip/clock.h> > +#include <asm/arch-rockchip/grf_rk3399.h> > +#include <asm/arch-rockchip/hardware.h> > + > +#ifdef CONFIG_MISC_INIT_R > +int misc_init_r(void) > +{ > + struct rk3399_grf_regs *grf = > + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); > + > + /** > + * Some SSD's to work on rock960 would require explicit > + * domain voltage change, so BT565 is in 1.8v domain > + */ > + rk_setreg(&grf->io_vsel, BIT(0)); > + > + return 0; > +} > +#endif > diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig > index 045d989a19..64517f9623 100644 > --- a/configs/rock960-rk3399_defconfig > +++ b/configs/rock960-rk3399_defconfig > @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 > CONFIG_DEBUG_UART_CLOCK=24000000 > CONFIG_DEBUG_UART=y > CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb" > +CONFIG_MISC_INIT_R=y > CONFIG_DISPLAY_BOARDINFO_LATE=y > # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > CONFIG_SPL_STACK_R=y > @@ -19,6 +20,7 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > CONFIG_CMD_USB=y > +CONFIG_CMD_PCI=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > CONFIG_CMD_PMIC=y > @@ -36,10 +38,13 @@ CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_SDMA=y > CONFIG_MMC_SDHCI_ROCKCHIP=y > CONFIG_DM_ETH=y > +CONFIG_NVME=y > +CONFIG_PCI=y > CONFIG_PMIC_RK8XX=y > CONFIG_REGULATOR_PWM=y > CONFIG_REGULATOR_RK8XX=y > CONFIG_PWM_ROCKCHIP=y > +CONFIG_DM_RESET=y > CONFIG_BAUDRATE=1500000 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_SYSRESET=y
Hi Jagan, On 2020/5/10 ??12:56, Jagan Teki wrote: > Due to board limitation some SSD's would work > on rock960 PCIe M.2 only with 1.8V IO domain. > > So, this patch enables grf io_sel explicitly to > make PCIe/M.2 to work. > > Cc: Tom Cubie <tom at radxa.com> > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> > --- > Changes for v3: > - collect mani a-b > - add comments > > board/vamrs/rock960_rk3399/rock960-rk3399.c | 23 +++++++++++++++++++++ > configs/rock960-rk3399_defconfig | 5 +++++ > 2 files changed, 28 insertions(+) > > diff --git a/board/vamrs/rock960_rk3399/rock960-rk3399.c b/board/vamrs/rock960_rk3399/rock960-rk3399.c > index 68a127b9ac..ef1eb2d0b7 100644 > --- a/board/vamrs/rock960_rk3399/rock960-rk3399.c > +++ b/board/vamrs/rock960_rk3399/rock960-rk3399.c > @@ -2,3 +2,26 @@ > /* > * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> > */ > + > +#include <common.h> > +#include <syscon.h> > +#include <asm/io.h> > +#include <asm/arch-rockchip/clock.h> > +#include <asm/arch-rockchip/grf_rk3399.h> > +#include <asm/arch-rockchip/hardware.h> > + > +#ifdef CONFIG_MISC_INIT_R > +int misc_init_r(void) > +{ > + struct rk3399_grf_regs *grf = > + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); > + > + /** > + * Some SSD's to work on rock960 would require explicit > + * domain voltage change, so BT565 is in 1.8v domain > + */ > + rk_setreg(&grf->io_vsel, BIT(0)); +? rk_setreg(&grf->io_vsel, BIT(0)); +?????????????????????????? ^ +arch/arm/include/asm/io.h:118:34: note: in definition of macro ?writel? + #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) +????????????????????????????????? ^ +board/vamrs/rock960_rk3399/rock960-rk3399.c:23:2: note: in expansion of macro ?rk_setreg? +? ^~~~~~~~~ +board/vamrs/rock960_rk3399/built-in.o: In function `misc_init_r': +board/vamrs/rock960_rk3399/rock960-rk3399.c:23: undefined reference to `BIT' +make[1]: *** [u-boot] Error 139 Did you get this error when build the code? Thanks, - Kever > + > + return 0; > +} > +#endif > diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig > index 045d989a19..64517f9623 100644 > --- a/configs/rock960-rk3399_defconfig > +++ b/configs/rock960-rk3399_defconfig > @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 > CONFIG_DEBUG_UART_CLOCK=24000000 > CONFIG_DEBUG_UART=y > CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb" > +CONFIG_MISC_INIT_R=y > CONFIG_DISPLAY_BOARDINFO_LATE=y > # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > CONFIG_SPL_STACK_R=y > @@ -19,6 +20,7 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > CONFIG_CMD_USB=y > +CONFIG_CMD_PCI=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > CONFIG_CMD_PMIC=y > @@ -36,10 +38,13 @@ CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_SDMA=y > CONFIG_MMC_SDHCI_ROCKCHIP=y > CONFIG_DM_ETH=y > +CONFIG_NVME=y > +CONFIG_PCI=y > CONFIG_PMIC_RK8XX=y > CONFIG_REGULATOR_PWM=y > CONFIG_REGULATOR_RK8XX=y > CONFIG_PWM_ROCKCHIP=y > +CONFIG_DM_RESET=y > CONFIG_BAUDRATE=1500000 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_SYSRESET=y
Hi Kever, On Fri, May 22, 2020 at 8:45 AM Kever Yang <kever.yang at rock-chips.com> wrote: > > Hi Jagan, > > On 2020/5/10 ??12:56, Jagan Teki wrote: > > Due to board limitation some SSD's would work > > on rock960 PCIe M.2 only with 1.8V IO domain. > > > > So, this patch enables grf io_sel explicitly to > > make PCIe/M.2 to work. > > > > Cc: Tom Cubie <tom at radxa.com> > > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > > Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> > > --- > > Changes for v3: > > - collect mani a-b > > - add comments > > > > board/vamrs/rock960_rk3399/rock960-rk3399.c | 23 +++++++++++++++++++++ > > configs/rock960-rk3399_defconfig | 5 +++++ > > 2 files changed, 28 insertions(+) > > > > diff --git a/board/vamrs/rock960_rk3399/rock960-rk3399.c b/board/vamrs/rock960_rk3399/rock960-rk3399.c > > index 68a127b9ac..ef1eb2d0b7 100644 > > --- a/board/vamrs/rock960_rk3399/rock960-rk3399.c > > +++ b/board/vamrs/rock960_rk3399/rock960-rk3399.c > > @@ -2,3 +2,26 @@ > > /* > > * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> > > */ > > + > > +#include <common.h> > > +#include <syscon.h> > > +#include <asm/io.h> > > +#include <asm/arch-rockchip/clock.h> > > +#include <asm/arch-rockchip/grf_rk3399.h> > > +#include <asm/arch-rockchip/hardware.h> > > + > > +#ifdef CONFIG_MISC_INIT_R > > +int misc_init_r(void) > > +{ > > + struct rk3399_grf_regs *grf = > > + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); > > + > > + /** > > + * Some SSD's to work on rock960 would require explicit > > + * domain voltage change, so BT565 is in 1.8v domain > > + */ > > + rk_setreg(&grf->io_vsel, BIT(0)); > + rk_setreg(&grf->io_vsel, BIT(0)); > + ^ > +arch/arm/include/asm/io.h:118:34: note: in definition of macro ?writel? > + #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) > + ^ > +board/vamrs/rock960_rk3399/rock960-rk3399.c:23:2: note: in expansion of > macro ?rk_setreg? > + ^~~~~~~~~ > +board/vamrs/rock960_rk3399/built-in.o: In function `misc_init_r': > +board/vamrs/rock960_rk3399/rock960-rk3399.c:23: undefined reference to > `BIT' > +make[1]: *** [u-boot] Error 139 > > > Did you get this error when build the code? Sorry, I have forgotten to commit bitops header, will send this patch alone for the next version. Jagan.
diff --git a/board/vamrs/rock960_rk3399/rock960-rk3399.c b/board/vamrs/rock960_rk3399/rock960-rk3399.c index 68a127b9ac..ef1eb2d0b7 100644 --- a/board/vamrs/rock960_rk3399/rock960-rk3399.c +++ b/board/vamrs/rock960_rk3399/rock960-rk3399.c @@ -2,3 +2,26 @@ /* * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org> */ + +#include <common.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/grf_rk3399.h> +#include <asm/arch-rockchip/hardware.h> + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + struct rk3399_grf_regs *grf = + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + + /** + * Some SSD's to work on rock960 would require explicit + * domain voltage change, so BT565 is in 1.8v domain + */ + rk_setreg(&grf->io_vsel, BIT(0)); + + return 0; +} +#endif diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index 045d989a19..64517f9623 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb" +CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y @@ -19,6 +20,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y CONFIG_CMD_PMIC=y @@ -36,10 +38,13 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_DM_ETH=y +CONFIG_NVME=y +CONFIG_PCI=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y +CONFIG_DM_RESET=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYSRESET=y