@@ -48,6 +48,8 @@ Optional properties:
zero
- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
not supported by the composite-mux-clock subtype
+- ti,default-parent : configures mux parent during boot to be the provided
+ phandle clock
Examples:
@@ -65,6 +67,7 @@ abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
ti,bit-shift = <24>;
reg = <0x0108>;
+ ti,default-parent = <&sys_32k_ck>;
};
mcbsp5_mux_fck: mcbsp5_mux_fck {
@@ -74,3 +77,7 @@ mcbsp5_mux_fck: mcbsp5_mux_fck {
ti,bit-shift = <4>;
reg = <0x02d8>;
};
+
+&mcbsp5_mux_fck {
+ ti,default-parent = <&mcbsp_clks>;
+};
@@ -108,7 +108,8 @@ static struct clk *_register_mux(struct device *dev, const char *name,
const char **parent_names, u8 num_parents,
unsigned long flags, void __iomem *reg,
u8 shift, u32 mask, u8 clk_mux_flags,
- u32 *table, spinlock_t *lock)
+ u32 *table, int default_parent,
+ spinlock_t *lock)
{
struct clk_mux *mux;
struct clk *clk;
@@ -136,6 +137,9 @@ static struct clk *_register_mux(struct device *dev, const char *name,
mux->table = table;
mux->hw.init = &init;
+ if (default_parent >= 0)
+ ti_clk_mux_set_parent(&mux->hw, default_parent);
+
clk = clk_register(dev, &mux->hw);
if (IS_ERR(clk))
@@ -161,6 +165,8 @@ static void of_mux_clk_setup(struct device_node *node)
u32 mask = 0;
u32 shift = 0;
u32 flags = 0;
+ struct device_node *default_parent;
+ int default_parent_idx = -1;
num_parents = of_clk_get_parent_count(node);
if (num_parents < 2) {
@@ -174,6 +180,19 @@ static void of_mux_clk_setup(struct device_node *node)
for (i = 0; i < num_parents; i++)
parent_names[i] = of_clk_get_parent_name(node, i);
+ default_parent = of_parse_phandle(node, "ti,default-parent", 0);
+
+ if (default_parent) {
+ for (i = 0; i < num_parents; i++) {
+ struct device_node *tmp;
+ tmp = of_parse_phandle(node, "clocks", i);
+ if (tmp == default_parent) {
+ default_parent_idx = i;
+ break;
+ }
+ }
+ }
+
reg = ti_clk_get_reg_addr(node, 0);
if (!reg)
@@ -195,7 +214,8 @@ static void of_mux_clk_setup(struct device_node *node)
mask = (1 << fls(mask)) - 1;
clk = _register_mux(NULL, node->name, parent_names, num_parents, flags,
- reg, shift, mask, clk_mux_flags, NULL, NULL);
+ reg, shift, mask, clk_mux_flags, NULL,
+ default_parent_idx, NULL);
if (!IS_ERR(clk))
of_clk_add_provider(node, of_clk_src_simple_get, clk);
ti,mux-clock now supports ti,default-parent property, which can be used to configure the default parent of the clock during boot. This property can be added to board specific files, or under the clock data itself. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- Documentation/devicetree/bindings/clock/ti/mux.txt | 7 ++++++ drivers/clk/ti/mux.c | 24 ++++++++++++++++++-- 2 files changed, 29 insertions(+), 2 deletions(-)