[29/30] net: eepro100: Add DM support

Add support for driver model to the driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
---
 drivers/net/eepro100.c | 129 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 128 insertions(+), 1 deletion(-)

On Sat, May 23, 2020 at 7:45 PM Marek Vasut <marek.vasut at gmail.com> wrote:
>
> Add support for driver model to the driver.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
> ---
>  drivers/net/eepro100.c | 129 ++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 128 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
> index f474832552..45ea3b70fc 100644
> --- a/drivers/net/eepro100.c
> +++ b/drivers/net/eepro100.c
> @@ -206,14 +206,21 @@ struct eepro100_priv {
>         /* TX descriptor ring pointer */
>         int                     tx_next;
>         int                     tx_threshold;
> +#ifdef CONFIG_DM_ETH
> +       struct udevice          *devno;
> +#else
>         struct eth_device       dev;
>         pci_dev_t               devno;
> +#endif
>         char                    *name;
>         void __iomem            *iobase;
>         u8                      *enetaddr;
>  };
>
> -#if defined(CONFIG_E500)
> +#if defined(CONFIG_DM_ETH)
> +#define bus_to_phys(dev, a)    dm_pci_mem_to_phys((dev), (a))
> +#define phys_to_bus(dev, a)    dm_pci_phys_to_mem((dev), (a))
> +#elif defined(CONFIG_E500)
>  #define bus_to_phys(dev, a)    (a)
>  #define phys_to_bus(dev, a)    (a)
>  #else
> @@ -771,6 +778,7 @@ done:
>         return;
>  }
>
> +#ifndef CONFIG_DM_ETH
>  static int eepro100_init(struct eth_device *dev, bd_t *bis)
>  {
>         struct eepro100_priv *priv =
> @@ -888,3 +896,122 @@ int eepro100_initialize(bd_t *bis)
>
>         return card_number;
>  }
> +
> +#else  /* DM_ETH */
> +static int eepro100_start(struct udevice *dev)
> +{
> +       struct eth_pdata *plat = dev_get_platdata(dev);
> +       struct eepro100_priv *priv = dev_get_priv(dev);
> +
> +       memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
> +
> +       return eepro100_init_common(priv);
> +}
> +
> +static void eepro100_stop(struct udevice *dev)
> +{
> +       struct eepro100_priv *priv = dev_get_priv(dev);
> +
> +       eepro100_halt_common(priv);
> +}
> +
> +static int eepro100_send(struct udevice *dev, void *packet, int length)
> +{
> +       struct eepro100_priv *priv = dev_get_priv(dev);
> +       int ret;
> +
> +       ret = eepro100_send_common(priv, packet, length);
> +
> +       return ret ? 0 : -ETIMEDOUT;
> +}
> +
> +static int eepro100_recv(struct udevice *dev, int flags, uchar **packetp)
> +{
> +       struct eepro100_priv *priv = dev_get_priv(dev);
> +
> +       return eepro100_recv_common(priv, packetp);
> +}
> +
> +static int eepro100_free_pkt(struct udevice *dev, uchar *packet, int length)
> +{
> +       struct eepro100_priv *priv = dev_get_priv(dev);
> +
> +       eepro100_free_pkt_common(priv);
> +
> +       return 0;
> +}
> +
> +static int eepro100_read_rom_hwaddr(struct udevice *dev)
> +{
> +       struct eepro100_priv *priv = dev_get_priv(dev);
> +
> +       eepro100_get_hwaddr(priv);
> +
> +       return 0;
> +}
> +
> +static int eepro100_bind(struct udevice *dev)
> +{
> +       static int card_number;
> +       char name[16];
> +
> +       sprintf(name, "eepro100#%u", card_number++);
> +
> +       return device_set_name(dev, name);
> +}
> +
> +static int eepro100_probe(struct udevice *dev)
> +{
> +       struct eth_pdata *plat = dev_get_platdata(dev);
> +       struct eepro100_priv *priv = dev_get_priv(dev);
> +       u16 command, status;
> +       u32 iobase;
> +       int ret;
> +
> +       dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase);
> +       iobase &= ~0xf;
> +
> +       debug("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n", iobase);
> +
> +       priv->devno = dev;
> +       priv->enetaddr = plat->enetaddr;
> +       priv->iobase = (void __iomem *)bus_to_phys(dev, iobase);
> +
> +       command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
> +       dm_pci_write_config16(dev, PCI_COMMAND, command);
> +       dm_pci_read_config16(dev, PCI_COMMAND, &status);
> +       if ((status & command) != command) {
> +               printf("eepro100: Couldn't enable IO access or Bus Mastering\n");
> +               return -EINVAL;
> +       }
> +
> +       ret = eepro100_initialize_mii(priv);
> +       if (ret)
> +               return ret;
> +
> +       dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x20);
> +
> +       return 0;
> +}
> +
> +static const struct eth_ops eepro100_ops = {
> +       .start          = eepro100_start,
> +       .send           = eepro100_send,
> +       .recv           = eepro100_recv,
> +       .stop           = eepro100_stop,
> +       .free_pkt       = eepro100_free_pkt,
> +       .read_rom_hwaddr = eepro100_read_rom_hwaddr,
> +};
> +
> +U_BOOT_DRIVER(eth_eepro100) = {
> +       .name   = "eth_eepro100",
> +       .id     = UCLASS_ETH,
> +       .bind   = eepro100_bind,
> +       .probe  = eepro100_probe,
> +       .ops    = &eepro100_ops,
> +       .priv_auto_alloc_size = sizeof(struct eepro100_priv),
> +       .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> +};
> +
> +U_BOOT_PCI_DEVICE(eth_eepro100, supported);
> +#endif
> --
> 2.25.1
>
Reviewed-By: Ramon Fried <rfried.dev at gmail.com>