@@ -68,18 +68,6 @@ config TARGET_OMAP3_IGEP00X0
select OMAP3_GPIO_6
imply CMD_DM
-config TARGET_OMAP3_OVERO
- bool "OMAP35xx Gumstix Overo"
- select DM
- select DM_GPIO
- select DM_SERIAL
- select OMAP3_GPIO_2
- select OMAP3_GPIO_3
- select OMAP3_GPIO_4
- select OMAP3_GPIO_5
- select OMAP3_GPIO_6
- imply CMD_DM
-
config TARGET_OMAP3_ZOOM1
bool "TI Zoom1"
select DM
@@ -171,7 +159,6 @@ source "board/ti/beagle/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
-source "board/overo/Kconfig"
source "board/logicpd/zoom1/Kconfig"
source "board/ti/am3517crane/Kconfig"
source "board/pandora/Kconfig"
deleted file mode 100644
@@ -1,9 +0,0 @@
-if TARGET_OMAP3_OVERO
-
-config SYS_BOARD
- default "overo"
-
-config SYS_CONFIG_NAME
- default "omap3_overo"
-
-endif
deleted file mode 100644
@@ -1,6 +0,0 @@
-OVERO BOARD
-M: Steve Sakoman <sakoman at gmail.com>
-S: Maintained
-F: board/overo/
-F: include/configs/omap3_overo.h
-F: configs/omap3_overo_defconfig
deleted file mode 100644
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-ifdef CONFIG_SPL_BUILD
-obj-y := spl.o common.o
-else
-obj-y := overo.o common.o
-endif
deleted file mode 100644
@@ -1,368 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Maintainer : Steve Sakoman <steve at sakoman.com>
- *
- * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
- * Richard Woodruff <r-woodruff2 at ti.com>
- * Syed Mohammed Khasim <khasim at ti.com>
- * Sunil Kumar <sunilsaini05 at gmail.com>
- * Shashi Ranjan <shashiranjanmca05 at gmail.com>
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- */
-#include <serial.h>
-#include <twl4030.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/omap_mmc.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define TWL4030_I2C_BUS 0
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- /* board id for Linux */
- gd->bd->bi_arch_number = MACH_TYPE_OVERO;
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- return 0;
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_MMC)
-void board_mmc_power_init(void)
-{
- twl4030_power_mmc_init(0);
-}
-#endif
-
-#if defined(CONFIG_SPL_OS_BOOT)
-int spl_start_uboot(void)
-{
- /* break into full u-boot on 'c' */
- if (serial_tstc() && serial_getc() == 'c')
- return 1;
-
- return 0;
-}
-#endif /* CONFIG_SPL_OS_BOOT */
-
-#define MUX_OVERO() \
- /*SDRC*/\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
- MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /*GPIO_54*/\
- /* - MMC1_WP*/\
- MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) /*GPMC_nCS7*/\
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M0)) /*GPMC_CLK*/\
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
- /*CAMERA*/\
- MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M0)) /*CAM_HS */\
- MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M0)) /*CAM_VS */\
- MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M0)) /*CAM_PCLK*/\
- MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\
- MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\
- MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\
- MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\
- MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\
- MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\
- MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\
- MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\
- MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\
- MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\
- MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\
- MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\
- /*Audio Interface */\
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\
- MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- /*Expansion card */\
- MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) /*MMC1_CLK*/\
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
- /*Wireless LAN */\
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
- MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
- MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
- MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
- /*Bluetooth*/\
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\
- MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
- MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\
- MUX_VAL(CP(UART1_RTS), (IEN | PTU | DIS | M4)) /*GPIO_149*/ \
- MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M0)) /*McBSP4_CLKX*/\
- MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M0)) /*McBSP4_DR*/\
- MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M0)) /*McBSP4_DX*/\
- MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0)) /*McBSP4_FSX*/\
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) /*McBSP1_CLKR*/\
- MUX_VAL(CP(MCBSP1_FSR), (IEN | PTD | DIS | M0)) /*McBSP1_FSR*/\
- MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M0)) /*McBSP1_DX*/\
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) /*McBSP1_DR*/\
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) /*McBSP1_FSX*/\
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) /*McBSP1_CLKX*/\
- /*Serial Interface*/\
- MUX_VAL(CP(UART3_RTS_SD), (IEN | PTU | EN | M4)) /*GPIO_164 W2W_*/\
- /* BT_NRESET*/\
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTU | EN | M0)) /*UART3_RX_IRRX*/\
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\
- /* - USBH_CPEN*/\
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\
- /* - USBH_RESET*/\
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA2*/\
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA7*/\
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA4*/\
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA5*/\
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA6*/\
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA3*/\
- /*Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
- MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M4)) /*GPIO_16*/\
- /* - W2W_NRESET*/\
- MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
- MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DIR*/\
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_NXT*/\
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA0*/\
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA1*/\
- /* die to die */\
- MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\
- MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\
- MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\
- MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\
- MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\
- MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\
- MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\
- MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\
- MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\
- MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\
- MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\
- MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\
- MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\
- MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\
- MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\
- MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\
- MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\
- MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\
- MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\
- MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\
- MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\
- MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\
- MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\
- MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\
- MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\
- MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\
- MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\
- MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\
- MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\
- MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\
- MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\
- MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\
- MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
-
-/*
- * Routine: get_board_revision
- * Description: Returns the board revision
- */
-int get_board_revision(void)
-{
- int revision;
-
- if (!gpio_request(112, "") &&
- !gpio_request(113, "") &&
- !gpio_request(115, "")) {
-
- gpio_direction_input(112);
- gpio_direction_input(113);
- gpio_direction_input(115);
-
- revision = gpio_get_value(115) << 2 |
- gpio_get_value(113) << 1 |
- gpio_get_value(112);
- } else {
- puts("Error: unable to acquire board revision GPIOs\n");
- revision = -1;
- }
-
- return revision;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_OVERO();
-}
deleted file mode 100644
@@ -1,411 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Maintainer : Steve Sakoman <steve at sakoman.com>
- *
- * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
- * Richard Woodruff <r-woodruff2 at ti.com>
- * Syed Mohammed Khasim <khasim at ti.com>
- * Sunil Kumar <sunilsaini05 at gmail.com>
- * Shashi Ranjan <shashiranjanmca05 at gmail.com>
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- */
-#include <common.h>
-#include <dm.h>
-#include <env.h>
-#include <init.h>
-#include <malloc.h>
-#include <net.h>
-#include <ns16550.h>
-#include <netdev.h>
-#include <twl4030.h>
-#include <linux/delay.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include "overo.h"
-
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-
-#define TWL4030_I2C_BUS 0
-#define EXPANSION_EEPROM_I2C_BUS 2
-#define EXPANSION_EEPROM_I2C_ADDRESS 0x51
-
-#define GUMSTIX_EMPTY_EEPROM 0x0
-
-#define GUMSTIX_SUMMIT 0x01000200
-#define GUMSTIX_TOBI 0x02000200
-#define GUMSTIX_TOBI_DUO 0x03000200
-#define GUMSTIX_PALO35 0x04000200
-#define GUMSTIX_PALO43 0x05000200
-#define GUMSTIX_CHESTNUT43 0x06000200
-#define GUMSTIX_PINTO 0x07000200
-#define GUMSTIX_GALLOP43 0x08000200
-#define GUMSTIX_ALTO35 0x09000200
-#define GUMSTIX_STAGECOACH 0x0A000200
-#define GUMSTIX_THUMBO 0x0B000200
-#define GUMSTIX_TURTLECORE 0x0C000200
-#define GUMSTIX_ARBOR43C 0x0D000200
-
-#define ETTUS_USRP_E 0x01000300
-
-#define GUMSTIX_NO_EEPROM 0xffffffff
-
-static struct {
- unsigned int device_vendor;
- unsigned char revision;
- unsigned char content;
- char fab_revision[8];
- char env_var[16];
- char env_setting[64];
-} expansion_config = {0x0};
-
-static const struct ns16550_platdata overo_serial = {
- .base = OMAP34XX_UART3,
- .reg_shift = 2,
- .clock = V_NS16550_CLK,
- .fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DEVICE(overo_uart) = {
- "ns16550_serial",
- &overo_serial
-};
-
-/*
- * Routine: get_sdio2_config
- * Description: Return information about the wifi module connection
- * Returns 0 if the module connects though a level translator
- * Returns 1 if the module connects directly
- */
-int get_sdio2_config(void)
-{
- int sdio_direct;
-
- if (!gpio_request(130, "") && !gpio_request(139, "")) {
-
- gpio_direction_output(130, 0);
- gpio_direction_input(139);
-
- sdio_direct = 1;
- gpio_set_value(130, 0);
- if (gpio_get_value(139) == 0) {
- gpio_set_value(130, 1);
- if (gpio_get_value(139) == 1)
- sdio_direct = 0;
- }
-
- gpio_direction_input(130);
- } else {
- puts("Error: unable to acquire sdio2 clk GPIOs\n");
- sdio_direct = -1;
- }
-
- return sdio_direct;
-}
-
-/*
- * Routine: get_expansion_id
- * Description: This function checks for expansion board by checking I2C
- * bus 2 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
-unsigned int get_expansion_id(void)
-{
- if (expansion_config.device_vendor != 0x0)
- return expansion_config.device_vendor;
-
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return GUMSTIX_NO_EEPROM;
- }
-
- /* read configuration data */
- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- i2c_set_bus_num(TWL4030_I2C_BUS);
-
- return expansion_config.device_vendor;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
- unsigned int expansion_id;
-
- twl4030_power_init();
- twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-
- printf("Board revision: %d\n", get_board_revision());
-
- switch (get_sdio2_config()) {
- case 0:
- puts("Tranceiver detected on mmc2\n");
- MUX_OVERO_SDIO2_TRANSCEIVER();
- break;
- case 1:
- puts("Direct connection on mmc2\n");
- MUX_OVERO_SDIO2_DIRECT();
- break;
- default:
- puts("Unable to detect mmc2 connection type\n");
- }
-
- expansion_id = get_expansion_id();
- switch (expansion_id) {
- case GUMSTIX_SUMMIT:
- printf("Recognized Summit expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- env_set("defaultdisplay", "dvi");
- env_set("expansionname", "summit");
- break;
- case GUMSTIX_TOBI:
- printf("Recognized Tobi expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- env_set("defaultdisplay", "dvi");
- env_set("expansionname", "tobi");
- break;
- case GUMSTIX_TOBI_DUO:
- printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- env_set("expansionname", "tobiduo");
- break;
- case GUMSTIX_PALO35:
- printf("Recognized Palo35 expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- env_set("defaultdisplay", "lcd35");
- env_set("expansionname", "palo35");
- break;
- case GUMSTIX_PALO43:
- printf("Recognized Palo43 expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- env_set("defaultdisplay", "lcd43");
- env_set("expansionname", "palo43");
- break;
- case GUMSTIX_CHESTNUT43:
- printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- env_set("defaultdisplay", "lcd43");
- env_set("expansionname", "chestnut43");
- break;
- case GUMSTIX_PINTO:
- printf("Recognized Pinto expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- break;
- case GUMSTIX_GALLOP43:
- printf("Recognized Gallop43 expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- env_set("defaultdisplay", "lcd43");
- env_set("expansionname", "gallop43");
- break;
- case GUMSTIX_ALTO35:
- printf("Recognized Alto35 expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- MUX_ALTO35();
- env_set("defaultdisplay", "lcd35");
- env_set("expansionname", "alto35");
- break;
- case GUMSTIX_STAGECOACH:
- printf("Recognized Stagecoach expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- break;
- case GUMSTIX_THUMBO:
- printf("Recognized Thumbo expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- break;
- case GUMSTIX_TURTLECORE:
- printf("Recognized Turtlecore expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- break;
- case GUMSTIX_ARBOR43C:
- printf("Recognized Arbor43C expansion board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- MUX_ARBOR43C();
- env_set("defaultdisplay", "lcd43");
- env_set("expansionname", "arbor43c");
- break;
- case ETTUS_USRP_E:
- printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_GUMSTIX();
- MUX_USRP_E();
- env_set("defaultdisplay", "dvi");
- break;
- case GUMSTIX_NO_EEPROM:
- case GUMSTIX_EMPTY_EEPROM:
- puts("No or empty EEPROM on expansion board\n");
- MUX_GUMSTIX();
- env_set("expansionname", "tobi");
- break;
- default:
- printf("Unrecognized expansion board 0x%08x\n", expansion_id);
- break;
- }
-
- if (expansion_config.content == 1)
- env_set(expansion_config.env_var, expansion_config.env_setting);
-
- omap_die_id_display();
-
- if (get_cpu_family() == CPU_OMAP34XX)
- env_set("boardname", "overo");
- else
- env_set("boardname", "overo-storm");
-
- return 0;
-}
-
-#if defined(CONFIG_CMD_NET)
-/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
-static const u32 gpmc_lan_config[] = {
- NET_LAN9221_GPMC_CONFIG1,
- NET_LAN9221_GPMC_CONFIG2,
- NET_LAN9221_GPMC_CONFIG3,
- NET_LAN9221_GPMC_CONFIG4,
- NET_LAN9221_GPMC_CONFIG5,
- NET_LAN9221_GPMC_CONFIG6,
- /*CONFIG7- computed as params */
-};
-
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- * Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
- struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
- /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
- writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
- /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
- /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
- &ctrl_base->gpmc_nadv_ale);
-}
-
-/*
- * Routine: reset_net_chip
- * Description: Reset the Ethernet hardware.
- */
-static void reset_net_chip(void)
-{
- /* Make GPIO 64 as output pin and send a magic pulse through it */
- if (!gpio_request(64, "")) {
- gpio_direction_output(64, 0);
- gpio_set_value(64, 1);
- udelay(1);
- gpio_set_value(64, 0);
- udelay(1);
- gpio_set_value(64, 1);
- }
-}
-
-int board_eth_init(bd_t *bis)
-{
- unsigned int expansion_id;
- int rc = 0;
-
-#ifdef CONFIG_SMC911X
- expansion_id = get_expansion_id();
- switch (expansion_id) {
- case GUMSTIX_TOBI_DUO:
- /* second lan chip */
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
- 0x2B000000, GPMC_SIZE_16M);
- /* no break */
- case GUMSTIX_TOBI:
- case GUMSTIX_CHESTNUT43:
- case GUMSTIX_STAGECOACH:
- case GUMSTIX_NO_EEPROM:
- case GUMSTIX_EMPTY_EEPROM:
- /* first lan chip */
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
- 0x2C000000, GPMC_SIZE_16M);
-
- setup_net_chip();
- reset_net_chip();
-
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
- break;
- default:
- break;
- }
-#endif
-
- return rc;
-}
-#endif
-
-#if defined(CONFIG_USB_EHCI_HCD)
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
-};
-
-#define GUMSTIX_GPIO_USBH_CPEN 168
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- /* Enable USB power */
- if (!gpio_request(GUMSTIX_GPIO_USBH_CPEN, "usbh_cpen"))
- gpio_direction_output(GUMSTIX_GPIO_USBH_CPEN, 1);
-
- return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(void)
-{
- /* Disable USB power */
- gpio_set_value(GUMSTIX_GPIO_USBH_CPEN, 0);
- gpio_free(GUMSTIX_GPIO_USBH_CPEN);
-
- return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
deleted file mode 100644
@@ -1,169 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008
- * Steve Sakoman <steve at sakoman.com>
- */
-#ifndef _OVERO_H_
-#define _OVERO_H_
-
-const omap3_sysinfo sysinfo = {
- DDR_STACKED,
- "Gumstix Overo board",
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
- "OneNAND",
-#else
- "NAND",
-#endif
-};
-
-int get_board_revision(void);
-
-/* overo revisions */
-#define REVISION_0 0x0
-#define REVISION_1 0x1
-#define REVISION_2 0x2
-#define REVISION_3 0x3
-#define REVISION_4 0x4
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_GUMSTIX() \
- /*GPMC*/\
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
- MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) /*GPMC_nCS6*/\
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) /*GPIO_63*/\
- /* - CAM_IRQ*/\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
- /* - SMSC911X_NRES*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4)) /*GPIO_65*/\
- /*DSS*/\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
- /*CAMERA*/\
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*CAM_FLD*/\
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\
- /* - PEN_DOWN*/\
- /*Bluetooth*/\
- MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144 - LCD_EN*/\
- MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\
- MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M4)) /*GPIO_150-MMC3_WP*/\
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
- /*Serial Interface*/\
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\
- MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*HDQ_SIO*/\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO */\
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI */\
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
- MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176 */\
- /* - LAN_INTR */\
- /*Control and debug */\
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10*/\
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
- MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\
- MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT3*/\
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4)) /*GPIO_21*/\
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4)) /*GPIO_22*/\
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\
-
-#define MUX_OVERO_SDIO2_DIRECT() \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
- MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M0)) /*MMC2_DAT4*/\
- MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M0)) /*MMC2_DAT5*/\
- MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M0)) /*MMC2_DAT6*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)) /*MMC2_DAT7*/\
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
-
-#define MUX_OVERO_SDIO2_TRANSCEIVER() \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
- MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
- MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
- MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) /*GPIO_126*/\
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
-
-#define MUX_USRP_E() \
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M4)) /*GPIO_173 */\
- MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M4)) /*GPIO_175 */\
-
-#define MUX_ALTO35() \
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10-BTN*/\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M4)) /*GPIO_148-RED LED*/\
- MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150-YELLOW LED*/\
- MUX_VAL(CP(UART1_RX), (IDIS | PTD | DIS | M4)) /*GPIO_151-BLUE LED*/\
- MUX_VAL(CP(HDQ_SIO), (IDIS | PTD | DIS | M4)) /*GPIO_170-GREEN LED*/\
- MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M4)) /*GPIO_175*/\
-
-#define MUX_ARBOR43C() \
- MUX_VAL(CP(CSI2_DX1), (IDIS | PTD | DIS | M4)) /*GPIO_114-RED LED*/\
- MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150-YELLOW LED*/\
- MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) /*GPIO_170-BUTTON */\
- MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*GPIO_186-BLUE LED*/\
- MUX_VAL(CP(JTAG_EMU1), (IDIS | PTD | DIS | M4)) /*GPIO_31-CAP WAKE*/\
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10-CAP IRQ*/\
-
-#endif
deleted file mode 100644
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Maintainer : Steve Sakoman <steve at sakoman.com>
- *
- * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
- * Richard Woodruff <r-woodruff2 at ti.com>
- * Syed Mohammed Khasim <khasim at ti.com>
- * Sunil Kumar <sunilsaini05 at gmail.com>
- * Shashi Ranjan <shashiranjanmca05 at gmail.com>
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include "overo.h"
-
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on both banks.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
- timings->mr = MICRON_V_MR_165;
- switch (get_board_revision()) {
- case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
- timings->mcfg = MICRON_V_MCFG_165(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_165;
- timings->ctrlb = MICRON_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- break;
- case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
- case REVISION_4:
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- break;
- case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
- timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
- timings->ctrla = HYNIX_V_ACTIMA_200;
- timings->ctrlb = HYNIX_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- break;
- case REVISION_3: /* Micron 512MB/1024MB, 1/2 banks of 512MB */
- timings->mcfg = MCFG(512 << 20, 15);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- break;
- default:
- timings->mcfg = MICRON_V_MCFG_165(128 << 20);
- timings->ctrla = MICRON_V_ACTIMA_165;
- timings->ctrlb = MICRON_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- }
-}
deleted file mode 100644
@@ -1,53 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ENV_OFFSET=0x240000
-CONFIG_TARGET_OMAP3_OVERO=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x40200000
-CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_PROMPT="Overo # "
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x240000
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1792k(u-boot),256k(environ),8m(linux),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_TWL4030_LED=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2C000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_CONS_INDEX=3
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_FAT_WRITE=y
-CONFIG_BCH=y
-CONFIG_OF_LIBFDT=y
@@ -56,12 +56,6 @@ make
make omap3_zoom2_config
make
-* CM-T35:
-
-make cm_t35_config
-make
-
-
Custom commands
===============
deleted file mode 100644
@@ -1,184 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration settings for the Gumstix Overo board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/ti_omap3_common.h>
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
-
-/* call misc_init_r */
-
-/* pass the revision tag */
-#define CONFIG_REVISION_TAG
-
-/* override size of malloc() pool */
-#undef CONFIG_SYS_MALLOC_LEN
-/* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
- * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15))
-
-/* I2C Support */
-
-/* TWL4030 LED */
-
-/* USB EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183
-
-/* commands to include */
-
-#ifdef CONFIG_MTD_RAW_NAND
-/* NAND block size is 128 KiB. Synchronize these values with
- * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
- * xloader 4 * NAND_BLOCK_SIZE = 512 KiB
- * uboot 14 * NAND_BLOCK_SIZE = 1792 KiB
- * uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB
- * linux 64 * NAND_BLOCK_SIZE = 8 MiB
- * rootfs remainder
- */
-#endif /* CONFIG_MTD_RAW_NAND */
-
-/* Board NAND Info. */
-/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
- "bootdir=/boot\0" \
- "bootfile=zImage\0" \
- "usbtty=cdc_acm\0" \
- "console=ttyO2,115200n8\0" \
- "mpurate=auto\0" \
- "optargs=\0" \
- "vram=12M\0" \
- "dvimode=1024x768MR-16 at 60\0" \
- "defaultdisplay=dvi\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
- "mmcrootfstype=ext4 rootwait\0" \
- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
- "nandrootfstype=ubifs\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "nandargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running boot script from mmc ...; " \
- "source ${loadaddr}\0" \
- "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
- "importbootenv=echo Importing environment from mmc ...; " \
- "env import -t ${loadaddr} ${filesize}\0" \
- "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from mmc...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcbootfdt=echo Booting with DT from mmc ...; " \
- "run mmcargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "if nand read ${loadaddr} linux; then " \
- "bootm ${loadaddr};" \
- "fi;\0" \
- "nanddtsboot=echo Booting from nand with DTS...; " \
- "run nandargs; " \
- "ubi part rootfs; "\
- "ubifsmount ubi0:rootfs; "\
- "run loadubifdt; "\
- "run loadubizimage; "\
- "bootz ${loadaddr} - ${fdtaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "fi;" \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loaduimage; then " \
- "run mmcboot;" \
- "fi;" \
- "if run loadzimage; then " \
- "if test -z \"${fdtfile}\"; then " \
- "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
- "fi;" \
- "if run loadfdt; then " \
- "run mmcbootfdt;" \
- "fi;" \
- "fi;" \
- "fi;" \
- "run nandboot; " \
- "if test -z \"${fdtfile}\"; then "\
- "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
- "fi;" \
- "run nanddtsboot; " \
-
-/* memtest works on */
-
-/* FLASH and environment organization */
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FLASH_BASE NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
-
-#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-
-/* Initial RAM setup */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-
-/* NAND boot config */
-#define CONFIG_SYS_NAND_MAX_ECCPOS 56
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
- 13, 14, 16, 17, 18, 19, 20, 21, 22, \
- 23, 24, 25, 26, 27, 28, 30, 31, 32, \
- 33, 34, 35, 36, 37, 38, 39, 40, 41, \
- 42, 44, 45, 46, 47, 48, 49, 50, 51, \
- 52, 53, 54, 55, 56}
-#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 13
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
-#endif
-
-#endif /* __CONFIG_H */
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Steve Sakoman <sakoman at gmail.com> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> --- arch/arm/mach-omap2/omap3/Kconfig | 13 - board/overo/Kconfig | 9 - board/overo/MAINTAINERS | 6 - board/overo/Makefile | 10 - board/overo/common.c | 368 -------------------------- board/overo/overo.c | 411 ------------------------------ board/overo/overo.h | 169 ------------ board/overo/spl.c | 61 ----- configs/omap3_overo_defconfig | 53 ---- doc/README.omap3 | 6 - include/configs/omap3_overo.h | 184 ------------- 11 files changed, 1290 deletions(-) delete mode 100644 board/overo/Kconfig delete mode 100644 board/overo/MAINTAINERS delete mode 100644 board/overo/Makefile delete mode 100644 board/overo/common.c delete mode 100644 board/overo/overo.c delete mode 100644 board/overo/overo.h delete mode 100644 board/overo/spl.c delete mode 100644 configs/omap3_overo_defconfig delete mode 100644 include/configs/omap3_overo.h