@@ -4,9 +4,6 @@ choice
prompt "OMAP4 board select"
optional
-config TARGET_OMAP4_SDP4430
- bool "TI OMAP4 SDP4430"
-
config TARGET_KC1
bool "Amazon Kindle Fire (first generation)"
@@ -15,7 +12,6 @@ endchoice
config SYS_SOC
default "omap4"
-source "board/ti/sdp4430/Kconfig"
source "board/amazon/kc1/Kconfig"
endif
deleted file mode 100644
@@ -1,15 +0,0 @@
-if TARGET_OMAP4_SDP4430
-
-config SYS_BOARD
- default "sdp4430"
-
-config SYS_VENDOR
- default "ti"
-
-config SYS_CONFIG_NAME
- default "omap4_sdp4430"
-
-config CMD_BAT
- bool "Enable board-specific battery command"
-
-endif
deleted file mode 100644
@@ -1,6 +0,0 @@
-SDP4430 BOARD
-M: Lokesh Vutla <lokeshvutla at ti.com>
-S: Maintained
-F: board/ti/sdp4430/
-F: include/configs/omap4_sdp4430.h
-F: configs/omap4_sdp4430_defconfig
deleted file mode 100644
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y := sdp.o
-
-ifndef CONFIG_SPL_BUILD
-obj-y += cmd_bat.o
-endif
deleted file mode 100644
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Texas Instruments
- */
-
-#include <common.h>
-#include <command.h>
-
-#ifdef CONFIG_CMD_BAT
-#include <twl6030.h>
-
-int do_vbat(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- if (argc == 2) {
- if (strncmp(argv[1], "startcharge", 12) == 0)
- twl6030_start_usb_charging();
- else if (strncmp(argv[1], "stopcharge", 11) == 0)
- twl6030_stop_usb_charging();
- else if (strncmp(argv[1], "status", 7) == 0) {
- twl6030_get_battery_voltage();
- twl6030_get_battery_current();
- } else {
- goto bat_cmd_usage;
- }
- } else {
- goto bat_cmd_usage;
- }
- return 0;
-
-bat_cmd_usage:
- return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(
- bat, 2, 1, do_vbat,
- "battery charging, voltage/current measurements",
- "status - display battery voltage and current\n"
- "bat startcharge - start charging via USB\n"
- "bat stopcharge - stop charging\n"
-);
-#endif /* CONFIG_CMD_BAT */
deleted file mode 100644
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- * Aneesh V <aneesh at ti.com>
- * Steve Sakoman <steve at sakoman.com>
- */
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <twl6030.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mmc_host_def.h>
-
-#include "sdp4430_mux_data.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct omap_sysinfo sysinfo = {
- "Board: OMAP4430 SDP\n"
-};
-
-/**
- * @brief board_init
- *
- * @return 0
- */
-int board_init(void)
-{
- gpmc_init();
-
- gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return 0;
-}
-
-/**
- * @brief misc_init_r - Configure SDP board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
-#ifdef CONFIG_TWL6030_POWER
- twl6030_init_battery_charging();
-#endif
- return 0;
-}
-
-void set_muxconf_regs(void)
-{
- do_set_mux((*ctrl)->control_padconf_core_base,
- core_padconf_array_essential,
- sizeof(core_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_essential,
- sizeof(wkup_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- if ((omap_revision() >= OMAP4460_ES1_0) &&
- (omap_revision() < OMAP4470_ES1_0))
- do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_essential_4460,
- sizeof(wkup_padconf_array_essential_4460) /
- sizeof(struct pad_conf_entry));
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- omap_mmc_init(0, 0, 0, -1, -1);
- omap_mmc_init(1, 0, 0, -1, -1);
- return 0;
-}
-
-#if !defined(CONFIG_SPL_BUILD)
-void board_mmc_power_init(void)
-{
- twl6030_power_mmc_init(0);
- twl6030_power_mmc_init(1);
-}
-#endif
-#endif
-
-/*
- * get_board_rev() - get board revision
- */
-u32 get_board_rev(void)
-{
- return 0x20;
-}
deleted file mode 100644
@@ -1,67 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * Balaji Krishnamoorthy <balajitk at ti.com>
- * Aneesh V <aneesh at ti.com>
- */
-#ifndef _SDP4430_MUX_DATA_H
-#define _SDP4430_MUX_DATA_H
-
-#include <asm/arch/mux_omap4.h>
-
-const struct pad_conf_entry core_padconf_array_essential[] = {
-
-{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
-{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
-{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
-{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
-{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
-{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
-{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
-{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
-{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
-{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
-{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
-{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
-{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
-{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
-{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
-{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
-{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
-{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
-{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
-{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
-{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
-{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
-{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
-{UART3_TX_IRTX, (M0)}, /* uart3_tx */
-{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
-{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
-{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
-{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
-{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
-{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
-{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
-{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
-{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */
-{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
-{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential[] = {
-
-{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
-{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
-{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-
-{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */
-
-};
-
-#endif /* _SDP4430_MUX_DATA_H */
deleted file mode 100644
@@ -1,42 +0,0 @@
-CONFIG_ARM=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ENV_OFFSET=0xE0000
-CONFIG_OMAP44XX=y
-CONFIG_TARGET_OMAP4_SDP4430=y
-CONFIG_CMD_BAT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x40300000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SPL_I2C_SUPPORT is not set
-# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_EFI_PARTITION is not set
-CONFIG_SPL_PARTITION_UUIDS=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_CONS_INDEX=3
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_UDC=y
-CONFIG_USB_OMAP3=y
-CONFIG_USB_GADGET=y
-CONFIG_FAT_WRITE=y
-# CONFIG_REGEX is not set
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
deleted file mode 100644
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated.
- * Aneesh V <aneesh at ti.com>
- * Steve Sakoman <steve at sakoman.com>
- *
- * Configuration settings for the TI SDP4430 board.
- * See ti_omap4_common.h for OMAP4 common part
- */
-
-#ifndef __CONFIG_SDP4430_H
-#define __CONFIG_SDP4430_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP
-
-#include <configs/ti_omap4_common.h>
-
-/* ENV related config options */
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
-
-#endif /* __CONFIG_SDP4430_H */
DM, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> --- arch/arm/mach-omap2/omap4/Kconfig | 4 -- board/ti/sdp4430/Kconfig | 15 ----- board/ti/sdp4430/MAINTAINERS | 6 -- board/ti/sdp4430/Makefile | 10 --- board/ti/sdp4430/cmd_bat.c | 41 ------------ board/ti/sdp4430/sdp.c | 100 ---------------------------- board/ti/sdp4430/sdp4430_mux_data.h | 67 ------------------- configs/omap4_sdp4430_defconfig | 42 ------------ include/configs/omap4_sdp4430.h | 25 ------- 9 files changed, 310 deletions(-) delete mode 100644 board/ti/sdp4430/Kconfig delete mode 100644 board/ti/sdp4430/MAINTAINERS delete mode 100644 board/ti/sdp4430/Makefile delete mode 100644 board/ti/sdp4430/cmd_bat.c delete mode 100644 board/ti/sdp4430/sdp.c delete mode 100644 board/ti/sdp4430/sdp4430_mux_data.h delete mode 100644 configs/omap4_sdp4430_defconfig delete mode 100644 include/configs/omap4_sdp4430.h