diff mbox series

[v2,10/23] overo: Drop omap3 overo

Message ID 20200527125637.149189-11-jagan@amarulasolutions.com
State New
Headers show
Series spi: dm-conversion (part1) | expand

Commit Message

Jagan Teki May 27, 2020, 12:56 p.m. UTC
OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Drop it.

Cc: Steve Sakoman <sakoman at gmail.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/mach-omap2/omap3/Kconfig |  13 -
 board/overo/Kconfig               |   9 -
 board/overo/MAINTAINERS           |   6 -
 board/overo/Makefile              |  10 -
 board/overo/common.c              | 368 --------------------------
 board/overo/overo.c               | 411 ------------------------------
 board/overo/overo.h               | 169 ------------
 board/overo/spl.c                 |  61 -----
 configs/omap3_overo_defconfig     |  53 ----
 doc/README.omap3                  |   6 -
 include/configs/omap3_overo.h     | 184 -------------
 11 files changed, 1290 deletions(-)
 delete mode 100644 board/overo/Kconfig
 delete mode 100644 board/overo/MAINTAINERS
 delete mode 100644 board/overo/Makefile
 delete mode 100644 board/overo/common.c
 delete mode 100644 board/overo/overo.c
 delete mode 100644 board/overo/overo.h
 delete mode 100644 board/overo/spl.c
 delete mode 100644 configs/omap3_overo_defconfig
 delete mode 100644 include/configs/omap3_overo.h
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 34a845e9b6..306c2596d3 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -68,18 +68,6 @@  config TARGET_OMAP3_IGEP00X0
 	select OMAP3_GPIO_6
 	imply CMD_DM
 
-config TARGET_OMAP3_OVERO
-	bool "OMAP35xx Gumstix Overo"
-	select DM
-	select DM_GPIO
-	select DM_SERIAL
-	select OMAP3_GPIO_2
-	select OMAP3_GPIO_3
-	select OMAP3_GPIO_4
-	select OMAP3_GPIO_5
-	select OMAP3_GPIO_6
-	imply CMD_DM
-
 config TARGET_OMAP3_ZOOM1
 	bool "TI Zoom1"
 	select DM
@@ -171,7 +159,6 @@  source "board/ti/beagle/Kconfig"
 source "board/timll/devkit8000/Kconfig"
 source "board/ti/evm/Kconfig"
 source "board/isee/igep00x0/Kconfig"
-source "board/overo/Kconfig"
 source "board/logicpd/zoom1/Kconfig"
 source "board/ti/am3517crane/Kconfig"
 source "board/pandora/Kconfig"
diff --git a/board/overo/Kconfig b/board/overo/Kconfig
deleted file mode 100644
index 74572a62be..0000000000
--- a/board/overo/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@ 
-if TARGET_OMAP3_OVERO
-
-config SYS_BOARD
-	default "overo"
-
-config SYS_CONFIG_NAME
-	default "omap3_overo"
-
-endif
diff --git a/board/overo/MAINTAINERS b/board/overo/MAINTAINERS
deleted file mode 100644
index 8f089e87f8..0000000000
--- a/board/overo/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@ 
-OVERO BOARD
-M:	Steve Sakoman <sakoman at gmail.com>
-S:	Maintained
-F:	board/overo/
-F:	include/configs/omap3_overo.h
-F:	configs/omap3_overo_defconfig
diff --git a/board/overo/Makefile b/board/overo/Makefile
deleted file mode 100644
index b62bab9fe4..0000000000
--- a/board/overo/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-ifdef CONFIG_SPL_BUILD
-obj-y	:= spl.o common.o
-else
-obj-y	:= overo.o common.o
-endif
diff --git a/board/overo/common.c b/board/overo/common.c
deleted file mode 100644
index 67823e68b6..0000000000
--- a/board/overo/common.c
+++ /dev/null
@@ -1,368 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Maintainer : Steve Sakoman <steve at sakoman.com>
- *
- * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
- *      Richard Woodruff <r-woodruff2 at ti.com>
- *      Syed Mohammed Khasim <khasim at ti.com>
- *      Sunil Kumar <sunilsaini05 at gmail.com>
- *      Shashi Ranjan <shashiranjanmca05 at gmail.com>
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- */
-#include <serial.h>
-#include <twl4030.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/omap_mmc.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define TWL4030_I2C_BUS                 0
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* board id for Linux */
-	gd->bd->bi_arch_number = MACH_TYPE_OVERO;
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	return 0;
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_MMC)
-void board_mmc_power_init(void)
-{
-	twl4030_power_mmc_init(0);
-}
-#endif
-
-#if defined(CONFIG_SPL_OS_BOOT)
-int spl_start_uboot(void)
-{
-	/* break into full u-boot on 'c' */
-	if (serial_tstc() && serial_getc() == 'c')
-		return 1;
-
-	return 0;
-}
-#endif /* CONFIG_SPL_OS_BOOT */
-
-#define MUX_OVERO() \
- /*SDRC*/\
-	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
-	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
-	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
-	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
-	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
-	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
-	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
-	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
-	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
-	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
-	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
-	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
-	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
-	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
-	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
-	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
-	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
-	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
-	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
-	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
-	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
-	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
-	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
-	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
-	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
-	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
-	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
-	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
-	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
-	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
-	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
-	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
-	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
-	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
-	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
-	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
-	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
-	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) /*GPMC_A1*/\
-	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) /*GPMC_A2*/\
-	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) /*GPMC_A3*/\
-	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) /*GPMC_A4*/\
-	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) /*GPMC_A5*/\
-	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) /*GPMC_A6*/\
-	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) /*GPMC_A7*/\
-	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) /*GPMC_A8*/\
-	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) /*GPMC_A9*/\
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) /*GPMC_A10*/\
-	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) /*GPMC_D0*/\
-	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) /*GPMC_D1*/\
-	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) /*GPMC_D2*/\
-	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) /*GPMC_D3*/\
-	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) /*GPMC_D4*/\
-	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) /*GPMC_D5*/\
-	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) /*GPMC_D6*/\
-	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) /*GPMC_D7*/\
-	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) /*GPMC_D8*/\
-	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) /*GPMC_D9*/\
-	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) /*GPMC_D10*/\
-	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) /*GPMC_D11*/\
-	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) /*GPMC_D12*/\
-	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) /*GPMC_D13*/\
-	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) /*GPMC_D14*/\
-	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) /*GPMC_D15*/\
-	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
-	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
-	MUX_VAL(CP(GPMC_NCS3),		(IEN  | PTU | EN  | M4)) /*GPIO_54*/\
-								 /* - MMC1_WP*/\
-	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M0)) /*GPMC_nCS7*/\
-	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /*GPMC_nCS3*/\
-	MUX_VAL(CP(GPMC_CLK),		(IEN  | PTU | EN  | M0)) /*GPMC_CLK*/\
-	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
-	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
-	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
-	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
-	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
-	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
- /*CAMERA*/\
-	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | DIS | M0)) /*CAM_HS */\
-	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | DIS | M0)) /*CAM_VS */\
-	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
-	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | DIS | M0)) /*CAM_PCLK*/\
-	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) /*CAM_D0*/\
-	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) /*CAM_D1*/\
-	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) /*CAM_D2*/\
-	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) /*CAM_D3*/\
-	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) /*CAM_D4*/\
-	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) /*CAM_D5*/\
-	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) /*CAM_D6*/\
-	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) /*CAM_D7*/\
-	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) /*CAM_D8*/\
-	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) /*CAM_D9*/\
-	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) /*CAM_D10*/\
-	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) /*CAM_D11*/\
-	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | EN  | M4)) /*GPIO_112*/\
-	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | EN  | M4)) /*GPIO_113*/\
-	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | EN  | M4)) /*GPIO_115*/\
- /*Audio Interface */\
-	MUX_VAL(CP(MCBSP2_FSX),		(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
-	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP2_CLKX*/\
-	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
-	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- /*Expansion card */\
-	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) /*MMC1_CLK*/\
-	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
-	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
-	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
-	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
-	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
-	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT4*/\
-	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT5*/\
-	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT6*/\
-	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT7*/\
- /*Wireless LAN */\
-	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_130*/\
-	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
-	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
-	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
-	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_CMD*/\
-	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_139*/\
- /*Bluetooth*/\
-	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M1)) /*UART2_CTS*/\
-	MUX_VAL(CP(MCBSP3_DR),		(IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
-	MUX_VAL(CP(MCBSP3_CLKX),	(IDIS | PTD | DIS | M1)) /*UART2_TX*/\
-	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTD | DIS | M1)) /*UART2_RX*/\
-	MUX_VAL(CP(UART1_RTS),		(IEN  | PTU | DIS | M4)) /*GPIO_149*/ \
-	MUX_VAL(CP(MCBSP4_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP4_CLKX*/\
-	MUX_VAL(CP(MCBSP4_DR),		(IEN  | PTD | DIS | M0)) /*McBSP4_DR*/\
-	MUX_VAL(CP(MCBSP4_DX),		(IEN  | PTD | DIS | M0)) /*McBSP4_DX*/\
-	MUX_VAL(CP(MCBSP4_FSX),		(IEN  | PTD | DIS | M0)) /*McBSP4_FSX*/\
-	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) /*McBSP1_CLKR*/\
-	MUX_VAL(CP(MCBSP1_FSR),		(IEN  | PTD | DIS | M0)) /*McBSP1_FSR*/\
-	MUX_VAL(CP(MCBSP1_DX),		(IEN  | PTD | DIS | M0)) /*McBSP1_DX*/\
-	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) /*McBSP1_DR*/\
-	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
-	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) /*McBSP1_FSX*/\
-	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP1_CLKX*/\
- /*Serial Interface*/\
-	MUX_VAL(CP(UART3_RTS_SD),	(IEN  | PTU | EN  | M4)) /*GPIO_164 W2W_*/\
-								 /* BT_NRESET*/\
-	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTU | EN  | M0)) /*UART3_RX_IRRX*/\
-	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
-	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
-	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
-	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) /*HSUSB0_DIR*/\
-	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) /*HSUSB0_NXT*/\
-	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
-	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
-	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
-	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
-	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
-	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
-	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
-	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
-	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
-	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\
-	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M4)) /*GPIO_168*/\
-								 /* - USBH_CPEN*/\
-	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M4)) /*GPIO_183*/\
-								 /* - USBH_RESET*/\
-	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /*I2C3_SCL*/\
-	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /*I2C3_SDA*/\
-	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /*I2C4_SCL*/\
-	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) /*I2C4_SDA*/\
-	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA2*/\
-	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA7*/\
-	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA4*/\
-	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA5*/\
-	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA6*/\
-	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA3*/\
- /*Control and debug */\
-	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /*SYS_32K*/\
-	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
-	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) /*SYS_nIRQ*/\
-	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
-	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
-	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\
-	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
-	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
-	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
-	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
-	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
-	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\
-	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M4)) /*GPIO_16*/\
-								 /* - W2W_NRESET*/\
-	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
-	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
-	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DIR*/\
-	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_NXT*/\
-	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA0*/\
-	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DATA1*/\
- /* die to die */\
-	MUX_VAL(CP(D2D_MCAD1),		(IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
-	MUX_VAL(CP(D2D_MCAD2),		(IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
-	MUX_VAL(CP(D2D_MCAD3),		(IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
-	MUX_VAL(CP(D2D_MCAD4),		(IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
-	MUX_VAL(CP(D2D_MCAD5),		(IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
-	MUX_VAL(CP(D2D_MCAD6),		(IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
-	MUX_VAL(CP(D2D_MCAD7),		(IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
-	MUX_VAL(CP(D2D_MCAD8),		(IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
-	MUX_VAL(CP(D2D_MCAD9),		(IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
-	MUX_VAL(CP(D2D_MCAD10),		(IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
-	MUX_VAL(CP(D2D_MCAD11),		(IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
-	MUX_VAL(CP(D2D_MCAD12),		(IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
-	MUX_VAL(CP(D2D_MCAD13),		(IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
-	MUX_VAL(CP(D2D_MCAD14),		(IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
-	MUX_VAL(CP(D2D_MCAD15),		(IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
-	MUX_VAL(CP(D2D_MCAD16),		(IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
-	MUX_VAL(CP(D2D_MCAD17),		(IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
-	MUX_VAL(CP(D2D_MCAD18),		(IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
-	MUX_VAL(CP(D2D_MCAD19),		(IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
-	MUX_VAL(CP(D2D_MCAD20),		(IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
-	MUX_VAL(CP(D2D_MCAD21),		(IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
-	MUX_VAL(CP(D2D_MCAD22),		(IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
-	MUX_VAL(CP(D2D_MCAD23),		(IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
-	MUX_VAL(CP(D2D_MCAD24),		(IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
-	MUX_VAL(CP(D2D_MCAD25),		(IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
-	MUX_VAL(CP(D2D_MCAD26),		(IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
-	MUX_VAL(CP(D2D_MCAD27),		(IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
-	MUX_VAL(CP(D2D_MCAD28),		(IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
-	MUX_VAL(CP(D2D_MCAD29),		(IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
-	MUX_VAL(CP(D2D_MCAD30),		(IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
-	MUX_VAL(CP(D2D_MCAD31),		(IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
-	MUX_VAL(CP(D2D_MCAD32),		(IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
-	MUX_VAL(CP(D2D_MCAD33),		(IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
-	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
-	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
-	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
-	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26mi*/\
-	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespwron*/\
-	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswarm */\
-	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9nirq */\
-	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
-	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) /*d2d_spint*/\
-	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) /*d2d_frint*/\
-	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq0*/\
-	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq1*/\
-	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq2*/\
-	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq3*/\
-	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrst*/\
-	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
-	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
-	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
-	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
-	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtck*/\
-	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
-	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeup*/\
-	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlereq*/\
-	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleack*/\
-	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
-	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
-	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) /*d2d_mread*/\
-	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) /*d2d_sread*/\
-	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
-	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
-	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
-	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
-
-/*
- * Routine: get_board_revision
- * Description: Returns the board revision
- */
-int get_board_revision(void)
-{
-	int revision;
-
-	if (!gpio_request(112, "") &&
-	    !gpio_request(113, "") &&
-	    !gpio_request(115, "")) {
-
-		gpio_direction_input(112);
-		gpio_direction_input(113);
-		gpio_direction_input(115);
-
-		revision = gpio_get_value(115) << 2 |
-			   gpio_get_value(113) << 1 |
-			   gpio_get_value(112);
-	} else {
-		puts("Error: unable to acquire board revision GPIOs\n");
-		revision = -1;
-	}
-
-	return revision;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *              hardware. Many pins need to be moved from protect to primary
- *              mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_OVERO();
-}
diff --git a/board/overo/overo.c b/board/overo/overo.c
deleted file mode 100644
index 5450f5d11c..0000000000
--- a/board/overo/overo.c
+++ /dev/null
@@ -1,411 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Maintainer : Steve Sakoman <steve at sakoman.com>
- *
- * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
- *	Richard Woodruff <r-woodruff2 at ti.com>
- *	Syed Mohammed Khasim <khasim at ti.com>
- *	Sunil Kumar <sunilsaini05 at gmail.com>
- *	Shashi Ranjan <shashiranjanmca05 at gmail.com>
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- */
-#include <common.h>
-#include <dm.h>
-#include <env.h>
-#include <init.h>
-#include <malloc.h>
-#include <net.h>
-#include <ns16550.h>
-#include <netdev.h>
-#include <twl4030.h>
-#include <linux/delay.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include "overo.h"
-
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-
-#define TWL4030_I2C_BUS			0
-#define EXPANSION_EEPROM_I2C_BUS	2
-#define EXPANSION_EEPROM_I2C_ADDRESS	0x51
-
-#define GUMSTIX_EMPTY_EEPROM		0x0
-
-#define GUMSTIX_SUMMIT			0x01000200
-#define GUMSTIX_TOBI			0x02000200
-#define GUMSTIX_TOBI_DUO		0x03000200
-#define GUMSTIX_PALO35			0x04000200
-#define GUMSTIX_PALO43			0x05000200
-#define GUMSTIX_CHESTNUT43		0x06000200
-#define GUMSTIX_PINTO			0x07000200
-#define GUMSTIX_GALLOP43		0x08000200
-#define GUMSTIX_ALTO35			0x09000200
-#define GUMSTIX_STAGECOACH		0x0A000200
-#define GUMSTIX_THUMBO			0x0B000200
-#define GUMSTIX_TURTLECORE		0x0C000200
-#define GUMSTIX_ARBOR43C		0x0D000200
-
-#define ETTUS_USRP_E			0x01000300
-
-#define GUMSTIX_NO_EEPROM		0xffffffff
-
-static struct {
-	unsigned int device_vendor;
-	unsigned char revision;
-	unsigned char content;
-	char fab_revision[8];
-	char env_var[16];
-	char env_setting[64];
-} expansion_config = {0x0};
-
-static const struct ns16550_platdata overo_serial = {
-	.base = OMAP34XX_UART3,
-	.reg_shift = 2,
-	.clock = V_NS16550_CLK,
-	.fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DEVICE(overo_uart) = {
-	"ns16550_serial",
-	&overo_serial
-};
-
-/*
- * Routine: get_sdio2_config
- * Description: Return information about the wifi module connection
- *              Returns 0 if the module connects though a level translator
- *              Returns 1 if the module connects directly
- */
-int get_sdio2_config(void)
-{
-	int sdio_direct;
-
-	if (!gpio_request(130, "") && !gpio_request(139, "")) {
-
-		gpio_direction_output(130, 0);
-		gpio_direction_input(139);
-
-		sdio_direct = 1;
-		gpio_set_value(130, 0);
-		if (gpio_get_value(139) == 0) {
-			gpio_set_value(130, 1);
-			if (gpio_get_value(139) == 1)
-				sdio_direct = 0;
-		}
-
-		gpio_direction_input(130);
-	} else {
-		puts("Error: unable to acquire sdio2 clk GPIOs\n");
-		sdio_direct = -1;
-	}
-
-	return sdio_direct;
-}
-
-/*
- * Routine: get_expansion_id
- * Description: This function checks for expansion board by checking I2C
- *		bus 2 for the availability of an AT24C01B serial EEPROM.
- *		returns the device_vendor field from the EEPROM
- */
-unsigned int get_expansion_id(void)
-{
-	if (expansion_config.device_vendor != 0x0)
-		return expansion_config.device_vendor;
-
-	i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
-	/* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
-	if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-		i2c_set_bus_num(TWL4030_I2C_BUS);
-		return GUMSTIX_NO_EEPROM;
-	}
-
-	/* read configuration data */
-	i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-		 sizeof(expansion_config));
-
-	i2c_set_bus_num(TWL4030_I2C_BUS);
-
-	return expansion_config.device_vendor;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
-	unsigned int expansion_id;
-
-	twl4030_power_init();
-	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-
-	printf("Board revision: %d\n", get_board_revision());
-
-	switch (get_sdio2_config()) {
-	case 0:
-		puts("Tranceiver detected on mmc2\n");
-		MUX_OVERO_SDIO2_TRANSCEIVER();
-		break;
-	case 1:
-		puts("Direct connection on mmc2\n");
-		MUX_OVERO_SDIO2_DIRECT();
-		break;
-	default:
-		puts("Unable to detect mmc2 connection type\n");
-	}
-
-	expansion_id = get_expansion_id();
-	switch (expansion_id) {
-	case GUMSTIX_SUMMIT:
-		printf("Recognized Summit expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		env_set("defaultdisplay", "dvi");
-		env_set("expansionname", "summit");
-		break;
-	case GUMSTIX_TOBI:
-		printf("Recognized Tobi expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		env_set("defaultdisplay", "dvi");
-		env_set("expansionname", "tobi");
-		break;
-	case GUMSTIX_TOBI_DUO:
-		printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		env_set("expansionname", "tobiduo");
-		break;
-	case GUMSTIX_PALO35:
-		printf("Recognized Palo35 expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		env_set("defaultdisplay", "lcd35");
-		env_set("expansionname", "palo35");
-		break;
-	case GUMSTIX_PALO43:
-		printf("Recognized Palo43 expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		env_set("defaultdisplay", "lcd43");
-		env_set("expansionname", "palo43");
-		break;
-	case GUMSTIX_CHESTNUT43:
-		printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		env_set("defaultdisplay", "lcd43");
-		env_set("expansionname", "chestnut43");
-		break;
-	case GUMSTIX_PINTO:
-		printf("Recognized Pinto expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		break;
-	case GUMSTIX_GALLOP43:
-		printf("Recognized Gallop43 expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		env_set("defaultdisplay", "lcd43");
-		env_set("expansionname", "gallop43");
-		break;
-	case GUMSTIX_ALTO35:
-		printf("Recognized Alto35 expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		MUX_ALTO35();
-		env_set("defaultdisplay", "lcd35");
-		env_set("expansionname", "alto35");
-		break;
-	case GUMSTIX_STAGECOACH:
-		printf("Recognized Stagecoach expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		break;
-	case GUMSTIX_THUMBO:
-		printf("Recognized Thumbo expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		break;
-	case GUMSTIX_TURTLECORE:
-		printf("Recognized Turtlecore expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		break;
-	case GUMSTIX_ARBOR43C:
-		printf("Recognized Arbor43C expansion board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		MUX_ARBOR43C();
-		env_set("defaultdisplay", "lcd43");
-		env_set("expansionname", "arbor43c");
-		break;
-	case ETTUS_USRP_E:
-		printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_GUMSTIX();
-		MUX_USRP_E();
-		env_set("defaultdisplay", "dvi");
-		break;
-	case GUMSTIX_NO_EEPROM:
-	case GUMSTIX_EMPTY_EEPROM:
-		puts("No or empty EEPROM on expansion board\n");
-		MUX_GUMSTIX();
-		env_set("expansionname", "tobi");
-		break;
-	default:
-		printf("Unrecognized expansion board 0x%08x\n", expansion_id);
-		break;
-	}
-
-	if (expansion_config.content == 1)
-		env_set(expansion_config.env_var, expansion_config.env_setting);
-
-	omap_die_id_display();
-
-	if (get_cpu_family() == CPU_OMAP34XX)
-		env_set("boardname", "overo");
-	else
-		env_set("boardname", "overo-storm");
-
-	return 0;
-}
-
-#if defined(CONFIG_CMD_NET)
-/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
-static const u32 gpmc_lan_config[] = {
-	NET_LAN9221_GPMC_CONFIG1,
-	NET_LAN9221_GPMC_CONFIG2,
-	NET_LAN9221_GPMC_CONFIG3,
-	NET_LAN9221_GPMC_CONFIG4,
-	NET_LAN9221_GPMC_CONFIG5,
-	NET_LAN9221_GPMC_CONFIG6,
-	/*CONFIG7- computed as params */
-};
-
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- *	      Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
-	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
-	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
-	writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
-		&ctrl_base->gpmc_nadv_ale);
-}
-
-/*
- * Routine: reset_net_chip
- * Description: Reset the Ethernet hardware.
- */
-static void reset_net_chip(void)
-{
-	/* Make GPIO 64 as output pin and send a magic pulse through it */
-	if (!gpio_request(64, "")) {
-		gpio_direction_output(64, 0);
-		gpio_set_value(64, 1);
-		udelay(1);
-		gpio_set_value(64, 0);
-		udelay(1);
-		gpio_set_value(64, 1);
-	}
-}
-
-int board_eth_init(bd_t *bis)
-{
-	unsigned int expansion_id;
-	int rc = 0;
-
-#ifdef CONFIG_SMC911X
-	expansion_id = get_expansion_id();
-	switch (expansion_id) {
-	case GUMSTIX_TOBI_DUO:
-		/* second lan chip */
-		enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
-				      0x2B000000, GPMC_SIZE_16M);
-		/* no break */
-	case GUMSTIX_TOBI:
-	case GUMSTIX_CHESTNUT43:
-	case GUMSTIX_STAGECOACH:
-	case GUMSTIX_NO_EEPROM:
-	case GUMSTIX_EMPTY_EEPROM:
-		/* first lan chip */
-		enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
-				      0x2C000000, GPMC_SIZE_16M);
-
-		setup_net_chip();
-		reset_net_chip();
-
-		rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-		break;
-	default:
-		break;
-	}
-#endif
-
-	return rc;
-}
-#endif
-
-#if defined(CONFIG_USB_EHCI_HCD)
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
-};
-
-#define GUMSTIX_GPIO_USBH_CPEN		168
-int ehci_hcd_init(int index, enum usb_init_type init,
-		  struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	/* Enable USB power */
-	if (!gpio_request(GUMSTIX_GPIO_USBH_CPEN, "usbh_cpen"))
-		gpio_direction_output(GUMSTIX_GPIO_USBH_CPEN, 1);
-
-	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(void)
-{
-	/* Disable USB power */
-	gpio_set_value(GUMSTIX_GPIO_USBH_CPEN, 0);
-	gpio_free(GUMSTIX_GPIO_USBH_CPEN);
-
-	return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
diff --git a/board/overo/overo.h b/board/overo/overo.h
deleted file mode 100644
index 513a3e3d63..0000000000
--- a/board/overo/overo.h
+++ /dev/null
@@ -1,169 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008
- * Steve Sakoman <steve at sakoman.com>
- */
-#ifndef _OVERO_H_
-#define _OVERO_H_
-
-const omap3_sysinfo sysinfo = {
-	DDR_STACKED,
-	"Gumstix Overo board",
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
-	"OneNAND",
-#else
-	"NAND",
-#endif
-};
-
-int get_board_revision(void);
-
-/* overo revisions */
-#define REVISION_0	0x0
-#define REVISION_1	0x1
-#define REVISION_2	0x2
-#define REVISION_3	0x3
-#define REVISION_4	0x4
-
-/*
- * IEN  - Input Enable
- * IDIS - Input Disable
- * PTD  - Pull type Down
- * PTU  - Pull type Up
- * DIS  - Pull type selection is inactive
- * EN   - Pull type selection is active
- * M0   - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_GUMSTIX() \
-  /*GPMC*/\
-	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
-	MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS4*/\
-	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS5*/\
-	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M0)) /*GPMC_nCS6*/\
-	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) /*GPIO_63*/\
-								 /* - CAM_IRQ*/\
-	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/\
-								 /* - SMSC911X_NRES*/\
-	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | DIS | M4)) /*GPIO_65*/\
- /*DSS*/\
-	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
-	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
-	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
-	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
-	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
-	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
-	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
-	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
-	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
-	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
-	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
-	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
-	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
-	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
-	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
-	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
-	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
-	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
-	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
-	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
-	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
-	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
-	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
-	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
-	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
-	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
-	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
- /*CAMERA*/\
-	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*CAM_FLD*/\
-	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
-	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M0)) /*CAM_WEN*/\
-	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
-	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | EN  | M4)) /*GPIO_114*/\
-								 /* - PEN_DOWN*/\
- /*Bluetooth*/\
-	MUX_VAL(CP(UART2_CTS),		(IEN  | PTD | DIS | M4)) /*GPIO_144 - LCD_EN*/\
-	MUX_VAL(CP(UART2_RTS),		(IEN  | PTD | DIS | M4)) /*GPIO_145*/\
-	MUX_VAL(CP(UART2_TX),		(IEN  | PTD | DIS | M4)) /*GPIO_146*/\
-	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147*/\
-	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) /*UART1_TX*/\
-	MUX_VAL(CP(UART1_CTS),		(IEN  | PTU | DIS | M4)) /*GPIO_150-MMC3_WP*/\
-	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) /*UART1_RX*/\
- /*Serial Interface*/\
-	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /*UART3_CTS_RCTX*/\
-	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*HDQ_SIO*/\
-	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) /*McSPI1_CLK*/\
-	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) /*McSPI1_SIMO */\
-	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI1_SOMI */\
-	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) /*McSPI1_CS0*/\
-	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
-	MUX_VAL(CP(MCSPI1_CS2),		(IEN  | PTU | DIS | M4)) /*GPIO_176 */\
-								 /* - LAN_INTR */\
- /*Control and debug */\
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTU | EN  | M4)) /*GPIO_10*/\
-	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
-	MUX_VAL(CP(ETK_CLK_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CLK*/\
-	MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
-	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M4)) /*GPIO_14*/\
-	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M2)) /*MMC3_DAT3*/\
-	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M2)) /*MMC3_DAT0*/\
-	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M2)) /*MMC3_DAT1*/\
-	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M2)) /*MMC3_DAT2*/\
-	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M4)) /*GPIO_21*/\
-	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTU | EN  | M4)) /*GPIO_22*/\
-	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTU | EN  | M4)) /*GPIO_23*/\
-
-#define MUX_OVERO_SDIO2_DIRECT() \
-	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
-	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
-	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
-	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
-	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT4*/\
-	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT5*/\
-	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT6*/\
-	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT7*/\
-	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTD | EN  | M4)) /*GPIO_126*/\
-	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_127*/\
-	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_128*/\
-	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_129*/
-
-#define MUX_OVERO_SDIO2_TRANSCEIVER() \
-	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
-	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
-	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
-	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
-	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M1)) /*MMC2_DIR_CMD*/\
-	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
-	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) /*GPIO_126*/\
-	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_127*/\
-	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_128*/\
-	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_129*/
-
-#define MUX_USRP_E() \
-	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M4)) /*GPIO_173 */\
-	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M4)) /*GPIO_175 */\
-
-#define MUX_ALTO35() \
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTU | EN  | M4)) /*GPIO_10-BTN*/\
-	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M4)) /*GPIO_148-RED LED*/\
-	MUX_VAL(CP(UART1_CTS),		(IDIS | PTD | DIS | M4)) /*GPIO_150-YELLOW LED*/\
-	MUX_VAL(CP(UART1_RX),		(IDIS | PTD | DIS | M4)) /*GPIO_151-BLUE LED*/\
-	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTD | DIS | M4)) /*GPIO_170-GREEN LED*/\
-	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M4)) /*GPIO_175*/\
-
-#define MUX_ARBOR43C() \
-	MUX_VAL(CP(CSI2_DX1),		(IDIS | PTD | DIS | M4)) /*GPIO_114-RED LED*/\
-	MUX_VAL(CP(UART1_CTS),		(IDIS | PTD | DIS | M4)) /*GPIO_150-YELLOW LED*/\
-	MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M4)) /*GPIO_170-BUTTON */\
-	MUX_VAL(CP(SYS_CLKOUT2),	(IDIS | PTD | DIS | M4)) /*GPIO_186-BLUE LED*/\
-	MUX_VAL(CP(JTAG_EMU1),		(IDIS | PTD | DIS | M4)) /*GPIO_31-CAP WAKE*/\
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTU | EN  | M4)) /*GPIO_10-CAP IRQ*/\
-
-#endif
diff --git a/board/overo/spl.c b/board/overo/spl.c
deleted file mode 100644
index 91d8091d25..0000000000
--- a/board/overo/spl.c
+++ /dev/null
@@ -1,61 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Maintainer : Steve Sakoman <steve at sakoman.com>
- *
- * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
- *      Richard Woodruff <r-woodruff2 at ti.com>
- *      Syed Mohammed Khasim <khasim at ti.com>
- *      Sunil Kumar <sunilsaini05 at gmail.com>
- *      Shashi Ranjan <shashiranjanmca05 at gmail.com>
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include "overo.h"
-
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on both banks.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
-	timings->mr = MICRON_V_MR_165;
-	switch (get_board_revision()) {
-	case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
-		timings->mcfg = MICRON_V_MCFG_165(256 << 20);
-		timings->ctrla = MICRON_V_ACTIMA_165;
-		timings->ctrlb = MICRON_V_ACTIMB_165;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-		break;
-	case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
-	case REVISION_4:
-		timings->mcfg = MICRON_V_MCFG_200(256 << 20);
-		timings->ctrla = MICRON_V_ACTIMA_200;
-		timings->ctrlb = MICRON_V_ACTIMB_200;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-		break;
-	case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
-		timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
-		timings->ctrla = HYNIX_V_ACTIMA_200;
-		timings->ctrlb = HYNIX_V_ACTIMB_200;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-		break;
-	case REVISION_3: /* Micron 512MB/1024MB, 1/2 banks of 512MB */
-		timings->mcfg = MCFG(512 << 20, 15);
-		timings->ctrla = MICRON_V_ACTIMA_200;
-		timings->ctrlb = MICRON_V_ACTIMB_200;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-		break;
-	default:
-		timings->mcfg = MICRON_V_MCFG_165(128 << 20);
-		timings->ctrla = MICRON_V_ACTIMA_165;
-		timings->ctrlb = MICRON_V_ACTIMB_165;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-	}
-}
diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig
deleted file mode 100644
index af9f8a300d..0000000000
--- a/configs/omap3_overo_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ENV_OFFSET=0x240000
-CONFIG_TARGET_OMAP3_OVERO=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x40200000
-CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_PROMPT="Overo # "
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x240000
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1792k(u-boot),256k(environ),8m(linux),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_TWL4030_LED=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2C000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_CONS_INDEX=3
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_FAT_WRITE=y
-CONFIG_BCH=y
-CONFIG_OF_LIBFDT=y
diff --git a/doc/README.omap3 b/doc/README.omap3
index 00bcbdba9a..5ff9ee2bae 100644
--- a/doc/README.omap3
+++ b/doc/README.omap3
@@ -56,12 +56,6 @@  make
 make omap3_zoom2_config
 make
 
-* CM-T35:
-
-make cm_t35_config
-make
-
-
 Custom commands
 ===============
 
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
deleted file mode 100644
index 9a5b9f297c..0000000000
--- a/include/configs/omap3_overo.h
+++ /dev/null
@@ -1,184 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration settings for the Gumstix Overo board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/ti_omap3_common.h>
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
-
-/* call misc_init_r */
-
-/* pass the revision tag */
-#define CONFIG_REVISION_TAG
-
-/* override size of malloc() pool */
-#undef CONFIG_SYS_MALLOC_LEN
-/* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
- * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + (128 << 15))
-
-/* I2C Support */
-
-/* TWL4030 LED */
-
-/* USB EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	183
-
-/* commands to include */
-
-#ifdef CONFIG_MTD_RAW_NAND
-/* NAND block size is 128 KiB.  Synchronize these values with
- * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
- *  xloader              4 * NAND_BLOCK_SIZE = 512 KiB
- *  uboot               14 * NAND_BLOCK_SIZE = 1792 KiB
- *  uboot environtment   2 * NAND_BLOCK_SIZE = 256 KiB
- *  linux               64 * NAND_BLOCK_SIZE = 8 MiB
- *  rootfs              remainder
- */
-#endif /* CONFIG_MTD_RAW_NAND */
-
-/* Board NAND Info. */
-/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV \
-	"bootdir=/boot\0" \
-	"bootfile=zImage\0" \
-	"usbtty=cdc_acm\0" \
-	"console=ttyO2,115200n8\0" \
-	"mpurate=auto\0" \
-	"optargs=\0" \
-	"vram=12M\0" \
-	"dvimode=1024x768MR-16 at 60\0" \
-	"defaultdisplay=dvi\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
-	"nandrootfstype=ubifs\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running boot script from mmc ...; " \
-		"source ${loadaddr}\0" \
-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"mmcboot=echo Booting from mmc...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcbootfdt=echo Booting with DT from mmc ...; " \
-		"run mmcargs; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"if nand read ${loadaddr} linux; then " \
-			"bootm ${loadaddr};" \
-		"fi;\0" \
-	"nanddtsboot=echo Booting from nand with DTS...; " \
-		"run nandargs; " \
-		"ubi part rootfs; "\
-		"ubifsmount ubi0:rootfs; "\
-		"run loadubifdt; "\
-		"run loadubizimage; "\
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"fi;" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run loaduimage; then " \
-			"run mmcboot;" \
-		"fi;" \
-		"if run loadzimage; then " \
-			"if test -z \"${fdtfile}\"; then " \
-				"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
-			"fi;" \
-			"if run loadfdt; then " \
-				"run mmcbootfdt;" \
-			"fi;" \
-		"fi;" \
-	"fi;" \
-	"run nandboot; " \
-	"if test -z \"${fdtfile}\"; then "\
-		"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
-	"fi;" \
-	"run nanddtsboot; " \
-
-/* memtest works on */
-
-/* FLASH and environment organization */
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FLASH_BASE		NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
-
-#define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
-/* Initial RAM setup */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-
-/* NAND boot config */
-#define CONFIG_SYS_NAND_MAX_ECCPOS  56
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS      {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
-					13, 14, 16, 17, 18, 19, 20, 21, 22, \
-					23, 24, 25, 26, 27, 28, 30, 31, 32, \
-					33, 34, 35, 36, 37, 38, 39, 40, 41, \
-					42, 44, 45, 46, 47, 48, 49, 50, 51, \
-					52, 53, 54, 55, 56}
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	13
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#endif
-
-#endif				/* __CONFIG_H */