diff mbox series

[v2,5/6] wcn36xx: Fix software-driven scan

Message ID 1595586052-16081-6-git-send-email-loic.poulain@linaro.org
State Superseded
Headers show
Series wcn36xx misc fixes | expand

Commit Message

Loic Poulain July 24, 2020, 10:20 a.m. UTC
For software-driven scan, rely on mac80211 software scan instead
of internal driver implementation. The internal implementation
cause connection trouble since it keep the antenna busy during
the entire scan duration, moreover it's only a passive scanning
(no probe request). Therefore, let mac80211 manages sw scan.

Note: we fallback to software scan if firmware does not report
scan offload support or if we need to scan the 5Ghz band (currently
not supported by the offload scan...).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
 drivers/net/wireless/ath/wcn36xx/main.c    | 161 +++++++++++++++--------------
 drivers/net/wireless/ath/wcn36xx/smd.c     |  23 ++++-
 drivers/net/wireless/ath/wcn36xx/smd.h     |   8 +-
 drivers/net/wireless/ath/wcn36xx/txrx.c    |  11 +-
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |   6 +-
 5 files changed, 116 insertions(+), 93 deletions(-)

-- 
2.7.4

Comments

Bryan O'Donoghue July 29, 2020, 11:03 p.m. UTC | #1
On 24/07/2020 11:20, Loic Poulain wrote:
> +		if (wcn->sw_scan_opchannel == ch) {

> +			/* If channel is the initial operating channel, we may

> +			 * want to receive/transmit regular data packets, then

> +			 * simply stop the scan session and exit PS mode.

> +			 */


With a longer burn-in, this is breaking for me.

I have a suggested fix which applies on top since I see Kalle already 
has this in his pending tree.

---
bod
Kalle Valo Aug. 14, 2020, 2:50 p.m. UTC | #2
Loic Poulain <loic.poulain@linaro.org> wrote:

> For software-driven scan, rely on mac80211 software scan instead

> of internal driver implementation. The internal implementation

> cause connection trouble since it keep the antenna busy during

> the entire scan duration, moreover it's only a passive scanning

> (no probe request). Therefore, let mac80211 manages sw scan.

> 

> Note: we fallback to software scan if firmware does not report

> scan offload support or if we need to scan the 5Ghz band (currently

> not supported by the offload scan...).

> 

> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>


I dropped this patch 5 per Bryan's comment. Please work with Bryan to
fix the issue and resend this patch.

Patch set to Changes Requested.

-- 
https://patchwork.kernel.org/patch/11682841/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
wcn36xx mailing list
wcn36xx@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wcn36xx
Kalle Valo Aug. 14, 2020, 2:50 p.m. UTC | #3
Loic Poulain <loic.poulain@linaro.org> wrote:

> For software-driven scan, rely on mac80211 software scan instead

> of internal driver implementation. The internal implementation

> cause connection trouble since it keep the antenna busy during

> the entire scan duration, moreover it's only a passive scanning

> (no probe request). Therefore, let mac80211 manages sw scan.

> 

> Note: we fallback to software scan if firmware does not report

> scan offload support or if we need to scan the 5Ghz band (currently

> not supported by the offload scan...).

> 

> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>


I dropped this patch 5 per Bryan's comment. Please work with Bryan to
fix the issue and resend this patch.

Patch set to Changes Requested.

-- 
https://patchwork.kernel.org/patch/11682841/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index c19648f..0f6ebc7 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -354,8 +354,6 @@  static void wcn36xx_stop(struct ieee80211_hw *hw)
 
 	wcn36xx_dbg(WCN36XX_DBG_MAC, "mac stop\n");
 
-	cancel_work_sync(&wcn->scan_work);
-
 	mutex_lock(&wcn->scan_lock);
 	if (wcn->scan_req) {
 		struct cfg80211_scan_info scan_info = {
@@ -378,12 +376,37 @@  static void wcn36xx_stop(struct ieee80211_hw *hw)
 	kfree(wcn->hal_buf);
 }
 
-static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
+static void wcn36xx_change_ps(struct wcn36xx *wcn, bool enable)
 {
-	struct wcn36xx *wcn = hw->priv;
 	struct ieee80211_vif *vif = NULL;
 	struct wcn36xx_vif *tmp;
 
+	list_for_each_entry(tmp, &wcn->vif_list, list) {
+		vif = wcn36xx_priv_to_vif(tmp);
+		if (enable && !wcn->sw_scan) {
+			if (vif->bss_conf.ps) /* ps allowed ? */
+				wcn36xx_pmc_enter_bmps_state(wcn, vif);
+		} else {
+			wcn36xx_pmc_exit_bmps_state(wcn, vif);
+		}
+	}
+}
+
+static void wcn36xx_change_opchannel(struct wcn36xx *wcn, int ch)
+{
+	struct ieee80211_vif *vif = NULL;
+	struct wcn36xx_vif *tmp;
+
+	list_for_each_entry(tmp, &wcn->vif_list, list) {
+		vif = wcn36xx_priv_to_vif(tmp);
+		wcn36xx_smd_switch_channel(wcn, vif, ch);
+	}
+}
+
+static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct wcn36xx *wcn = hw->priv;
+
 	wcn36xx_dbg(WCN36XX_DBG_MAC, "mac config changed 0x%08x\n", changed);
 
 	mutex_lock(&wcn->conf_mutex);
@@ -392,24 +415,29 @@  static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
 		int ch = WCN36XX_HW_CHANNEL(wcn);
 		wcn36xx_dbg(WCN36XX_DBG_MAC, "wcn36xx_config channel switch=%d\n",
 			    ch);
-		list_for_each_entry(tmp, &wcn->vif_list, list) {
-			vif = wcn36xx_priv_to_vif(tmp);
-			wcn36xx_smd_switch_channel(wcn, vif, ch);
-		}
-	}
 
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
-		list_for_each_entry(tmp, &wcn->vif_list, list) {
-			vif = wcn36xx_priv_to_vif(tmp);
-			if (hw->conf.flags & IEEE80211_CONF_PS) {
-				if (vif->bss_conf.ps) /* ps allowed ? */
-					wcn36xx_pmc_enter_bmps_state(wcn, vif);
-			} else {
-				wcn36xx_pmc_exit_bmps_state(wcn, vif);
-			}
+		if (wcn->sw_scan_opchannel == ch) {
+			/* If channel is the initial operating channel, we may
+			 * want to receive/transmit regular data packets, then
+			 * simply stop the scan session and exit PS mode.
+			 */
+			wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
+						wcn->sw_scan_vif, ch);
+		} else if (wcn->sw_scan) {
+			/* A scan is ongoing, do not change the operating
+			 * channel, but start a scan session on the channel.
+			 */
+			wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN,
+					      wcn->sw_scan_vif);
+			wcn36xx_smd_start_scan(wcn, ch);
+		} else {
+			wcn36xx_change_opchannel(wcn, ch);
 		}
 	}
 
+	if (changed & IEEE80211_CONF_CHANGE_PS)
+		wcn36xx_change_ps(wcn, hw->conf.flags & IEEE80211_CONF_PS);
+
 	mutex_unlock(&wcn->conf_mutex);
 
 	return 0;
@@ -614,55 +642,26 @@  static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return ret;
 }
 
-static void wcn36xx_hw_scan_worker(struct work_struct *work)
+static int wcn36xx_hw_scan(struct ieee80211_hw *hw,
+			   struct ieee80211_vif *vif,
+			   struct ieee80211_scan_request *hw_req)
 {
-	struct wcn36xx *wcn = container_of(work, struct wcn36xx, scan_work);
-	struct cfg80211_scan_request *req = wcn->scan_req;
-	u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX];
-	struct cfg80211_scan_info scan_info = {};
-	bool aborted = false;
+	struct wcn36xx *wcn = hw->priv;
 	int i;
 
-	wcn36xx_dbg(WCN36XX_DBG_MAC, "mac80211 scan %d channels worker\n", req->n_channels);
-
-	for (i = 0; i < req->n_channels; i++)
-		channels[i] = req->channels[i]->hw_value;
-
-	wcn36xx_smd_update_scan_params(wcn, channels, req->n_channels);
-
-	wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN);
-	for (i = 0; i < req->n_channels; i++) {
-		mutex_lock(&wcn->scan_lock);
-		aborted = wcn->scan_aborted;
-		mutex_unlock(&wcn->scan_lock);
-
-		if (aborted)
-			break;
-
-		wcn->scan_freq = req->channels[i]->center_freq;
-		wcn->scan_band = req->channels[i]->band;
-
-		wcn36xx_smd_start_scan(wcn, req->channels[i]->hw_value);
-		msleep(30);
-		wcn36xx_smd_end_scan(wcn, req->channels[i]->hw_value);
-
-		wcn->scan_freq = 0;
+	if (!get_feat_caps(wcn->fw_feat_caps, SCAN_OFFLOAD)) {
+		/* fallback to mac80211 software scan */
+		return 1;
 	}
-	wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN);
 
-	scan_info.aborted = aborted;
-	ieee80211_scan_completed(wcn->hw, &scan_info);
-
-	mutex_lock(&wcn->scan_lock);
-	wcn->scan_req = NULL;
-	mutex_unlock(&wcn->scan_lock);
-}
+	/* For unknown reason, the hardware offloaded scan only works with
+	 * 2.4Ghz channels, fallback to software scan in other cases.
+	 */
+	for (i = 0; i < hw_req->req.n_channels; i++) {
+		if (hw_req->req.channels[i]->band != NL80211_BAND_2GHZ)
+			return 1;
+	}
 
-static int wcn36xx_hw_scan(struct ieee80211_hw *hw,
-			   struct ieee80211_vif *vif,
-			   struct ieee80211_scan_request *hw_req)
-{
-	struct wcn36xx *wcn = hw->priv;
 	mutex_lock(&wcn->scan_lock);
 	if (wcn->scan_req) {
 		mutex_unlock(&wcn->scan_lock);
@@ -674,12 +673,6 @@  static int wcn36xx_hw_scan(struct ieee80211_hw *hw,
 
 	mutex_unlock(&wcn->scan_lock);
 
-	if (!get_feat_caps(wcn->fw_feat_caps, SCAN_OFFLOAD)) {
-		/* legacy manual/sw scan */
-		schedule_work(&wcn->scan_work);
-		return 0;
-	}
-
 	return wcn36xx_smd_start_hw_scan(wcn, vif, &hw_req->req);
 }
 
@@ -696,16 +689,32 @@  static void wcn36xx_cancel_hw_scan(struct ieee80211_hw *hw,
 		/* ieee80211_scan_completed will be called on FW scan
 		 * indication */
 		wcn36xx_smd_stop_hw_scan(wcn);
-	} else {
-		struct cfg80211_scan_info scan_info = {
-			.aborted = true,
-		};
-
-		cancel_work_sync(&wcn->scan_work);
-		ieee80211_scan_completed(wcn->hw, &scan_info);
 	}
 }
 
+static void wcn36xx_sw_scan_start(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  const u8 *mac_addr)
+{
+	struct wcn36xx *wcn = hw->priv;
+
+	wcn->sw_scan = true;
+	wcn->sw_scan_vif = vif;
+	wcn->sw_scan_opchannel = WCN36XX_HW_CHANNEL(wcn);
+}
+
+static void wcn36xx_sw_scan_complete(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif)
+{
+	struct wcn36xx *wcn = hw->priv;
+
+	/* ensure that any scan session is finished */
+	wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN, wcn->sw_scan_vif,
+				wcn->sw_scan_opchannel);
+	wcn->sw_scan = false;
+	wcn->sw_scan_opchannel = 0;
+}
+
 static void wcn36xx_update_allowed_rates(struct ieee80211_sta *sta,
 					 enum nl80211_band band)
 {
@@ -1151,6 +1160,8 @@  static const struct ieee80211_ops wcn36xx_ops = {
 	.set_key		= wcn36xx_set_key,
 	.hw_scan		= wcn36xx_hw_scan,
 	.cancel_hw_scan		= wcn36xx_cancel_hw_scan,
+	.sw_scan_start		= wcn36xx_sw_scan_start,
+	.sw_scan_complete	= wcn36xx_sw_scan_complete,
 	.bss_info_changed	= wcn36xx_bss_info_changed,
 	.set_rts_threshold	= wcn36xx_set_rts_threshold,
 	.sta_add		= wcn36xx_sta_add,
@@ -1329,8 +1340,6 @@  static int wcn36xx_probe(struct platform_device *pdev)
 		goto out_wq;
 	}
 
-	INIT_WORK(&wcn->scan_work, wcn36xx_hw_scan_worker);
-
 	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
 	if (IS_ERR(wcn->smd_channel)) {
 		wcn36xx_err("failed to open WLAN_CTRL channel\n");
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 908cc6c..218f702 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -517,8 +517,10 @@  int wcn36xx_smd_stop(struct wcn36xx *wcn)
 	return ret;
 }
 
-int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode)
+int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode,
+			  struct ieee80211_vif *vif)
 {
+	struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
 	struct wcn36xx_hal_init_scan_req_msg msg_body;
 	int ret;
 
@@ -526,6 +528,13 @@  int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode)
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_INIT_SCAN_REQ);
 
 	msg_body.mode = mode;
+	if (vif_priv->bss_index != WCN36XX_HAL_BSS_INVALID_IDX) {
+		/* Notify BSSID with null DATA packet */
+		msg_body.frame_type = 2;
+		msg_body.notify = 1;
+		msg_body.scan_entry.bss_index[0] = vif_priv->bss_index;
+		msg_body.scan_entry.active_bss_count = 1;
+	}
 
 	PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
 
@@ -607,8 +616,10 @@  int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel)
 }
 
 int wcn36xx_smd_finish_scan(struct wcn36xx *wcn,
-			    enum wcn36xx_hal_sys_mode mode)
+			    enum wcn36xx_hal_sys_mode mode,
+			    struct ieee80211_vif *vif, u8 channel)
 {
+	struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
 	struct wcn36xx_hal_finish_scan_req_msg msg_body;
 	int ret;
 
@@ -616,6 +627,14 @@  int wcn36xx_smd_finish_scan(struct wcn36xx *wcn,
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_FINISH_SCAN_REQ);
 
 	msg_body.mode = mode;
+	if (vif_priv->bss_index != WCN36XX_HAL_BSS_INVALID_IDX) {
+		/* Notify BSSID with null data packet */
+		msg_body.notify = 1;
+		msg_body.frame_type = 2;
+		msg_body.oper_channel = channel;
+		msg_body.scan_entry.bss_index[0] = vif_priv->bss_index;
+		msg_body.scan_entry.active_bss_count = 1;
+	}
 
 	PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
 
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 68c59df..ffe8b0c 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -59,11 +59,13 @@  void wcn36xx_smd_close(struct wcn36xx *wcn);
 int wcn36xx_smd_load_nv(struct wcn36xx *wcn);
 int wcn36xx_smd_start(struct wcn36xx *wcn);
 int wcn36xx_smd_stop(struct wcn36xx *wcn);
-int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode);
 int wcn36xx_smd_start_scan(struct wcn36xx *wcn, u8 scan_channel);
 int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel);
-int wcn36xx_smd_finish_scan(struct wcn36xx *wcn,
-			    enum wcn36xx_hal_sys_mode mode);
+int wcn36xx_smd_finish_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode,
+			    struct ieee80211_vif *vif, u8 channel);
+int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode,
+			  struct ieee80211_vif *vif);
+
 int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn, u8 *channels, size_t channel_count);
 int wcn36xx_smd_start_hw_scan(struct wcn36xx *wcn, struct ieee80211_vif *vif,
 			      struct cfg80211_scan_request *req);
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index dcc2ec0..c9cf3db 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -49,15 +49,8 @@  int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
 	fc = __le16_to_cpu(hdr->frame_control);
 	sn = IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl));
 
-	/* When scanning associate beacons to this */
-	if (ieee80211_is_beacon(hdr->frame_control) && wcn->scan_freq) {
-		status.freq = wcn->scan_freq;
-		status.band = wcn->scan_band;
-	} else {
-		status.freq = WCN36XX_CENTER_FREQ(wcn);
-		status.band = WCN36XX_BAND(wcn);
-	}
-
+	status.freq = WCN36XX_CENTER_FREQ(wcn);
+	status.band = WCN36XX_BAND(wcn);
 	status.mactime = 10;
 	status.signal = -get_rssi0(bd);
 	status.antenna = 1;
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 2d89849..3221fed 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -223,10 +223,10 @@  struct wcn36xx {
 	spinlock_t		hal_ind_lock;
 	struct list_head	hal_ind_queue;
 
-	struct work_struct	scan_work;
 	struct cfg80211_scan_request *scan_req;
-	int			scan_freq;
-	int			scan_band;
+	bool			sw_scan;
+	u8			sw_scan_opchannel;
+	struct ieee80211_vif	*sw_scan_vif;
 	struct mutex		scan_lock;
 	bool			scan_aborted;