diff mbox series

[1/2] spi: mpc512x-psc: Use the framework .set_cs()

Message ID 20200729214817.478834-1-linus.walleij@linaro.org
State New
Headers show
Series [1/2] spi: mpc512x-psc: Use the framework .set_cs() | expand

Commit Message

Linus Walleij July 29, 2020, 9:48 p.m. UTC
The mpc512x-psc is rolling its own chip select control code,
but the SPI master framework can handle this. It was also
evaluating the CS status for each transfer but the CS change
should be per-message not per-transfer.

Switch to use the core .set_cs() to control the chip select.

Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/spi/spi-mpc512x-psc.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

-- 
2.26.2

Comments

Mark Brown July 30, 2020, 10:38 a.m. UTC | #1
On Wed, Jul 29, 2020 at 11:48:16PM +0200, Linus Walleij wrote:
> The mpc512x-psc is rolling its own chip select control code,

> but the SPI master framework can handle this. It was also

> evaluating the CS status for each transfer but the CS change

> should be per-message not per-transfer.


No, CS change is per transfer.
diff mbox series

Patch

diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index ea1b07953d38..35313a77f977 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -89,7 +89,7 @@  static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi,
 	return 0;
 }
 
-static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
+static void mpc512x_psc_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
@@ -98,6 +98,12 @@  static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
 	int speed;
 	u16 bclkdiv;
 
+	if (!enable) {
+		if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
+			mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
+		return;
+	}
+
 	sicr = in_be32(psc_addr(mps, sicr));
 
 	/* Set clock phase and polarity */
@@ -132,15 +138,6 @@  static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
 		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0);
 }
 
-static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
-{
-	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
-
-	if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
-		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
-
-}
-
 /* extract and scale size field in txsz or rxsz */
 #define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2);
 
@@ -290,40 +287,28 @@  static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
 				    struct spi_message *m)
 {
 	struct spi_device *spi;
-	unsigned cs_change;
 	int status;
 	struct spi_transfer *t;
 
 	spi = m->spi;
-	cs_change = 1;
 	status = 0;
 	list_for_each_entry(t, &m->transfers, transfer_list) {
 		status = mpc512x_psc_spi_transfer_setup(spi, t);
 		if (status < 0)
 			break;
 
-		if (cs_change)
-			mpc512x_psc_spi_activate_cs(spi);
-		cs_change = t->cs_change;
-
 		status = mpc512x_psc_spi_transfer_rxtx(spi, t);
 		if (status)
 			break;
 		m->actual_length += t->len;
 
 		spi_transfer_delay_exec(t);
-
-		if (cs_change)
-			mpc512x_psc_spi_deactivate_cs(spi);
 	}
 
 	m->status = status;
 	if (m->complete)
 		m->complete(m->context);
 
-	if (status || !cs_change)
-		mpc512x_psc_spi_deactivate_cs(spi);
-
 	mpc512x_psc_spi_transfer_setup(spi, NULL);
 
 	spi_finalize_current_message(master);
@@ -513,6 +498,7 @@  static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
 	master->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw;
 	master->transfer_one_message = mpc512x_psc_spi_msg_xfer;
 	master->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw;
+	master->set_cs = mpc512x_psc_spi_set_cs;
 	master->cleanup = mpc512x_psc_spi_cleanup;
 	master->dev.of_node = dev->of_node;