diff mbox series

[15/36] wcn36xx: Add wcn36xx_smd_set_sta_vht_params()

Message ID 20200803031132.1427063-16-bryan.odonoghue@linaro.org
State New
Headers show
Series wcn36xx: Add support for WCN3680 802.11ac | expand

Commit Message

Bryan O'Donoghue Aug. 3, 2020, 3:11 a.m. UTC 
This commit adds support for setting VHT parameters based on the declared
VHT capability bits in the VHT capability structure.

The bit-field TX-BF is purposefully left out since wcn3680 is the only
wcn36xx that can do VHT/80211.ac and is not TX beamformer capable. TX-BF is
a dead bit.

Similarly we cannot do 160MHz so VHT Channel width set should be zero.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
 drivers/net/wireless/ath/wcn36xx/smd.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

-- 
2.27.0
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 88fb4b7f1356..2632ea2ad9fa 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -173,6 +173,21 @@  static void wcn36xx_smd_set_sta_ht_params(struct ieee80211_sta *sta,
 	}
 }
 
+static void wcn36xx_smd_set_sta_vht_params(struct ieee80211_sta *sta,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params)
+{
+	if (sta->vht_cap.vht_supported) {
+		unsigned long caps = sta->vht_cap.cap;
+
+		sta_params->vht_capable = sta->vht_cap.vht_supported;
+		sta_params->vht_ldpc_enabled =
+			is_cap_supported(caps, IEEE80211_VHT_CAP_RXLDPC);
+		sta_params->vht_tx_mu_beamformee_capable =
+			is_cap_supported(caps, IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
+		sta_params->vht_tx_channel_width_set = 0;
+	}
+}
+
 static void wcn36xx_smd_set_sta_default_ht_params(
 		struct wcn36xx_hal_config_sta_params *sta_params)
 {