diff mbox series

[v4,4/7] wcn36xx: Add wcn36xx_smd_set_sta_vht_params()

Message ID 20200909153607.2904822-5-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series wcn36xx: Add a set of helpers to enable VHT parameter passing | expand

Commit Message

Bryan O'Donoghue Sept. 9, 2020, 3:36 p.m. UTC
This commit adds support for setting VHT parameters based on the declared
VHT capability bits in the VHT capability structure.

We cannot do 160MHz so VHT Channel width set should be zero.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
 drivers/net/wireless/ath/wcn36xx/smd.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

-- 
2.27.0


_______________________________________________
wcn36xx mailing list
wcn36xx@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wcn36xx
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 3f57acfe11bb..a563a30c3a0c 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -174,6 +174,28 @@  static void wcn36xx_smd_set_sta_ht_params(struct ieee80211_sta *sta,
 	}
 }
 
+void wcn36xx_smd_set_sta_vht_params(struct wcn36xx *wcn,
+		struct ieee80211_sta *sta,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params)
+{
+	if (sta->vht_cap.vht_supported) {
+		unsigned long caps = sta->vht_cap.cap;
+
+		sta_params->vht_capable = sta->vht_cap.vht_supported;
+		sta_params->vht_ldpc_enabled =
+			is_cap_supported(caps, IEEE80211_VHT_CAP_RXLDPC);
+		if (get_feat_caps(wcn->fw_feat_caps, MU_MIMO)) {
+			sta_params->vht_tx_mu_beamformee_capable =
+				is_cap_supported(caps, IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE);
+			if (sta_params->vht_tx_mu_beamformee_capable)
+			       sta_params->vht_tx_bf_enabled = 1;
+		} else {
+			sta_params->vht_tx_mu_beamformee_capable = 0;
+		}
+		sta_params->vht_tx_channel_width_set = 0;
+	}
+}
+
 static void wcn36xx_smd_set_sta_default_ht_params(
 		struct wcn36xx_hal_config_sta_params *sta_params)
 {