diff mbox series

[v2,3/4] arm: dts: add Alfa Network AP120C-AC

Message ID 20200909195640.3127341-4-robert.marko@sartura.hr
State Superseded
Headers show
Series arm: dts: qcom: ipq4019: add more boards | expand

Commit Message

Robert Marko Sept. 9, 2020, 7:56 p.m. UTC 
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm
IPQ4018 + QCA8075 platform.

Specification:

- Qualcomm IPQ4018 (717 MHz)
- 256 MB of RAM (DDR3)
- 16 MB (SPI NOR) + 128 or 512 MB (SPI NAND) of flash
- 2x Gbps Ethernet, with 802.3af PoE support in one port
- 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922)
- 3x U.FL connectors
- 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas
- Atmel/Microchip AT97SC3205T TPM module (I2C bus)
- TI CC2540 Bluetooth LE module (USB 2.0 bus)
- 1x button (reset)
- 1x USB 2.0
- DC jack for main power input (12 V)
- UART header available on PCB (2.0 mm pitch)

This adds DTS for both the generic and custom Bit edition for Sartura.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
Changes since v1:
* Drop include that does not exist

 arch/arm/boot/dts/Makefile                    |   2 +
 .../boot/dts/qcom-ipq4018-ap120c-ac-bit.dts   |  28 ++
 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts  |  27 ++
 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 254 ++++++++++++++++++
 4 files changed, 311 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
 create mode 100644 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
 create mode 100644 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi

Comments

Robert Marko Oct. 2, 2020, 5:40 p.m. UTC | #1 
On Wed, Sep 9, 2020 at 9:56 PM Robert Marko <robert.marko@sartura.hr> wrote:
>
> ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm
> IPQ4018 + QCA8075 platform.
>
> Specification:
>
> - Qualcomm IPQ4018 (717 MHz)
> - 256 MB of RAM (DDR3)
> - 16 MB (SPI NOR) + 128 or 512 MB (SPI NAND) of flash
> - 2x Gbps Ethernet, with 802.3af PoE support in one port
> - 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922)
> - 3x U.FL connectors
> - 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas
> - Atmel/Microchip AT97SC3205T TPM module (I2C bus)
> - TI CC2540 Bluetooth LE module (USB 2.0 bus)
> - 1x button (reset)
> - 1x USB 2.0
> - DC jack for main power input (12 V)
> - UART header available on PCB (2.0 mm pitch)
>
> This adds DTS for both the generic and custom Bit edition for Sartura.
>
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> ---
> Changes since v1:
> * Drop include that does not exist
>
>  arch/arm/boot/dts/Makefile                    |   2 +
>  .../boot/dts/qcom-ipq4018-ap120c-ac-bit.dts   |  28 ++
>  arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts  |  27 ++
>  arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 254 ++++++++++++++++++
>  4 files changed, 311 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9b474208057d..246d82fc5fcd 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -890,6 +890,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>         qcom-apq8074-dragonboard.dtb \
>         qcom-apq8084-ifc6540.dtb \
>         qcom-apq8084-mtp.dtb \
> +       qcom-ipq4018-ap120c-ac.dtb \
> +       qcom-ipq4018-ap120c-ac-bit.dtb \
>         qcom-ipq4018-jalapeno.dtb \
>         qcom-ipq4019-ap.dk01.1-c1.dtb \
>         qcom-ipq4019-ap.dk04.1-c1.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
> new file mode 100644
> index 000000000000..028ac8e24797
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include "qcom-ipq4018-ap120c-ac.dtsi"
> +
> +/ {
> +       model = "ALFA Network AP120C-AC Bit";
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               power {
> +                       label = "ap120c-ac:green:power";
> +                       gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
> +                       default-state = "on";
> +               };
> +
> +               wlan {
> +                       label = "ap120c-ac:green:wlan";
> +                       gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
> +               };
> +
> +               support {
> +                       label = "ap120c-ac:green:support";
> +                       gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
> +                       panic-indicator;
> +               };
> +       };
> +};
> diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
> new file mode 100644
> index 000000000000..b7916fc26d68
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include "qcom-ipq4018-ap120c-ac.dtsi"
> +
> +/ {
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               status: status {
> +                       label = "ap120c-ac:blue:status";
> +                       gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
> +                       default-state = "keep";
> +               };
> +
> +               wlan2g {
> +                       label = "ap120c-ac:green:wlan2g";
> +                       gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "phy0tpt";
> +               };
> +
> +               wlan5g {
> +                       label = "ap120c-ac:red:wlan5g";
> +                       gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "phy1tpt";
> +               };
> +       };
> +};
> diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> new file mode 100644
> index 000000000000..1f3b1ce82108
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> @@ -0,0 +1,254 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include "qcom-ipq4019.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +       model = "ALFA Network AP120C-AC";
> +       compatible = "alfa-network,ap120c-ac";
> +
> +       keys {
> +               compatible = "gpio-keys";
> +
> +               reset {
> +                       label = "reset";
> +                       gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
> +                       linux,code = <KEY_RESTART>;
> +               };
> +       };
> +};
> +
> +&tlmm {
> +       i2c0_pins: i2c0_pinmux {
> +               mux_i2c {
> +                       function = "blsp_i2c0";
> +                       pins = "gpio58", "gpio59";
> +                       drive-strength = <16>;
> +                       bias-disable;
> +               };
> +       };
> +
> +       mdio_pins: mdio_pinmux {
> +               mux_mdio {
> +                       pins = "gpio53";
> +                       function = "mdio";
> +                       bias-pull-up;
> +               };
> +
> +               mux_mdc {
> +                       pins = "gpio52";
> +                       function = "mdc";
> +                       bias-pull-up;
> +               };
> +       };
> +
> +       serial0_pins: serial0_pinmux {
> +               mux_uart {
> +                       pins = "gpio60", "gpio61";
> +                       function = "blsp_uart0";
> +                       bias-disable;
> +               };
> +       };
> +
> +       spi0_pins: spi0_pinmux {
> +               mux_spi {
> +                       function = "blsp_spi0";
> +                       pins = "gpio55", "gpio56", "gpio57";
> +                       drive-strength = <12>;
> +                       bias-disable;
> +               };
> +
> +               mux_cs {
> +                       function = "gpio";
> +                       pins = "gpio54", "gpio4";
> +                       drive-strength = <2>;
> +                       bias-disable;
> +                       output-high;
> +               };
> +       };
> +
> +       usb-power {
> +               line-name = "USB-power";
> +               gpios = <1 GPIO_ACTIVE_HIGH>;
> +               gpio-hog;
> +               output-high;
> +       };
> +};
> +
> +&watchdog {
> +       status = "okay";
> +};
> +
> +&prng {
> +       status = "okay";
> +};
> +
> +&blsp_dma {
> +       status = "okay";
> +};
> +
> +&blsp1_i2c3 {
> +       status = "okay";
> +
> +       pinctrl-0 = <&i2c0_pins>;
> +       pinctrl-names = "default";
> +
> +       tpm@29 {
> +               compatible = "atmel,at97sc3204t";
> +               reg = <0x29>;
> +       };
> +};
> +
> +&blsp1_spi1 {
> +       status = "okay";
> +
> +       pinctrl-0 = <&spi0_pins>;
> +       pinctrl-names = "default";
> +       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
> +
> +       flash@0 {
> +               compatible = "jedec,spi-nor";
> +               reg = <0>;
> +               spi-max-frequency = <24000000>;
> +
> +               partitions {
> +                       compatible = "fixed-partitions";
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +
> +                       partition@0 {
> +                               label = "SBL1";
> +                               reg = <0x00000000 0x00040000>;
> +                               read-only;
> +                       };
> +
> +                       partition@40000 {
> +                               label = "MIBIB";
> +                               reg = <0x00040000 0x00020000>;
> +                               read-only;
> +                       };
> +
> +                       partition@60000 {
> +                               label = "QSEE";
> +                               reg = <0x00060000 0x00060000>;
> +                               read-only;
> +                       };
> +
> +                       partition@c0000 {
> +                               label = "CDT";
> +                               reg = <0x000c0000 0x00010000>;
> +                               read-only;
> +                       };
> +
> +                       partition@d0000 {
> +                               label = "DDRPARAMS";
> +                               reg = <0x000d0000 0x00010000>;
> +                               read-only;
> +                       };
> +
> +                       partition@e0000 {
> +                               label = "u-boot-env";
> +                               reg = <0x000e0000 0x00010000>;
> +                       };
> +
> +                       partition@f0000 {
> +                               label = "u-boot";
> +                               reg = <0x000f0000 0x00080000>;
> +                               read-only;
> +                       };
> +
> +                       partition@170000 {
> +                               label = "ART";
> +                               reg = <0x00170000 0x00010000>;
> +                               read-only;
> +                       };
> +
> +                       partition@180000 {
> +                               label = "priv_data1";
> +                               reg = <0x00180000 0x00010000>;
> +                               read-only;
> +                       };
> +
> +                       partition@190000 {
> +                               label = "priv_data2";
> +                               reg = <0x00190000 0x00010000>;
> +                               read-only;
> +                       };
> +               };
> +       };
> +
> +       nand@1 {
> +               compatible = "spi-nand";
> +               reg = <1>;
> +               spi-max-frequency = <40000000>;
> +
> +               partitions {
> +                       compatible = "fixed-partitions";
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +
> +                       partition@0 {
> +                               label = "ubi1";
> +                               reg = <0x00000000 0x04000000>;
> +                       };
> +
> +                       partition@4000000 {
> +                               label = "ubi2";
> +                               reg = <0x04000000 0x04000000>;
> +                       };
> +               };
> +       };
> +};
> +
> +&blsp1_uart1 {
> +       status = "okay";
> +
> +       pinctrl-0 = <&serial0_pins>;
> +       pinctrl-names = "default";
> +};
> +
> +&cryptobam {
> +       status = "okay";
> +};
> +
> +&crypto {
> +       status = "okay";
> +};
> +
> +&mdio {
> +       status = "okay";
> +
> +       pinctrl-0 = <&mdio_pins>;
> +       pinctrl-names = "default";
> +};
> +
> +&wifi0 {
> +       status = "okay";
> +};
> +
> +&wifi1 {
> +       status = "okay";
> +       qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
> +};
> +
> +&usb3_hs_phy {
> +       status = "okay";
> +};
> +
> +&usb3 {
> +       status = "okay";
> +
> +       dwc3@8a00000 {
> +               phys = <&usb3_hs_phy>;
> +               phy-names = "usb2-phy";
> +       };
> +};
> +
> +&usb2_hs_phy {
> +       status = "okay";
> +};
> +
> +&usb2 {
> +       status = "okay";
> +};
> --
> 2.26.2
>

Hi,
Is there an issue with the patch preventing the review?

Regards,
Robert
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9b474208057d..246d82fc5fcd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -890,6 +890,8 @@  dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
+	qcom-ipq4018-ap120c-ac.dtb \
+	qcom-ipq4018-ap120c-ac-bit.dtb \
 	qcom-ipq4018-jalapeno.dtb \
 	qcom-ipq4019-ap.dk01.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c1.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
new file mode 100644
index 000000000000..028ac8e24797
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -0,0 +1,28 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4018-ap120c-ac.dtsi"
+
+/ {
+	model = "ALFA Network AP120C-AC Bit";
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "ap120c-ac:green:power";
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wlan {
+			label = "ap120c-ac:green:wlan";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		support {
+			label = "ap120c-ac:green:support";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
new file mode 100644
index 000000000000..b7916fc26d68
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -0,0 +1,27 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4018-ap120c-ac.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		status: status {
+			label = "ap120c-ac:blue:status";
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		wlan2g {
+			label = "ap120c-ac:green:wlan2g";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5g {
+			label = "ap120c-ac:red:wlan5g";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
new file mode 100644
index 000000000000..1f3b1ce82108
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -0,0 +1,254 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ALFA Network AP120C-AC";
+	compatible = "alfa-network,ap120c-ac";
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&tlmm {
+	i2c0_pins: i2c0_pinmux {
+		mux_i2c {
+			function = "blsp_i2c0";
+			pins = "gpio58", "gpio59";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_mdio {
+			pins = "gpio53";
+			function = "mdio";
+			bias-pull-up;
+		};
+
+		mux_mdc {
+			pins = "gpio52";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	serial0_pins: serial0_pinmux {
+		mux_uart {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0_pinmux {
+		mux_spi {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio4";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	usb-power {
+		line-name = "USB-power";
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		gpio-hog;
+		output-high;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	tpm@29 {
+		compatible = "atmel,at97sc3204t";
+		reg = <0x29>;
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "u-boot-env";
+				reg = <0x000e0000 0x00010000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "priv_data1";
+				reg = <0x00180000 0x00010000>;
+				read-only;
+			};
+
+			partition@190000 {
+				label = "priv_data2";
+				reg = <0x00190000 0x00010000>;
+				read-only;
+			};
+		};
+	};
+
+	nand@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi1";
+				reg = <0x00000000 0x04000000>;
+			};
+
+			partition@4000000 {
+				label = "ubi2";
+				reg = <0x04000000 0x04000000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial0_pins>;
+	pinctrl-names = "default";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+
+	dwc3@8a00000 {
+		phys = <&usb3_hs_phy>;
+		phy-names = "usb2-phy";
+	};
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};