diff mbox series

ASoC: dt-bindings: Correct interrupt flags in examples

Message ID 20200908145954.4629-1-krzk@kernel.org
State Accepted
Commit abe42b09118914f01246f880dd9029150fdc727c
Headers show
Series ASoC: dt-bindings: Correct interrupt flags in examples | expand

Commit Message

Krzysztof Kozlowski Sept. 8, 2020, 2:59 p.m. UTC
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted some
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/sound/max98090.txt | 2 +-
 Documentation/devicetree/bindings/sound/rt5640.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5659.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5665.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5668.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5677.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5682.txt   | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

Comments

Mark Brown Sept. 17, 2020, 6:57 p.m. UTC | #1
On Tue, 8 Sep 2020 16:59:54 +0200, Krzysztof Kozlowski wrote:
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING
> 
> Correct the interrupt flags, assuming the author of the code wanted some
> logical behavior behind the name "ACTIVE_xxx", this is:
>   ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: Correct interrupt flags in examples
      commit: abe42b09118914f01246f880dd9029150fdc727c

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index 7e1bbd5c27fd..39d640294c62 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -55,5 +55,5 @@  audio-codec@10 {
 	compatible = "maxim,max98090";
 	reg = <0x10>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
index e40e4893eed8..ff1228713f7e 100644
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -88,7 +88,7 @@  rt5640 {
 	compatible = "realtek,rt5640";
 	reg = <0x1c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
index 1766e0543fc5..56788f50b6cf 100644
--- a/Documentation/devicetree/bindings/sound/rt5659.txt
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -72,7 +72,7 @@  rt5659 {
 	compatible = "realtek,rt5659";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt
index 8df170506986..f6ca96b4ce98 100644
--- a/Documentation/devicetree/bindings/sound/rt5665.txt
+++ b/Documentation/devicetree/bindings/sound/rt5665.txt
@@ -62,7 +62,7 @@  rt5659 {
 	compatible = "realtek,rt5665";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt
index c88b96e7764b..a2b7e9a2f2f3 100644
--- a/Documentation/devicetree/bindings/sound/rt5668.txt
+++ b/Documentation/devicetree/bindings/sound/rt5668.txt
@@ -41,7 +41,7 @@  rt5668 {
 	compatible = "realtek,rt5668b";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
index 1b3c13d206ff..da2430099181 100644
--- a/Documentation/devicetree/bindings/sound/rt5677.txt
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -64,7 +64,7 @@  rt5677 {
 	compatible = "realtek,rt5677";
 	reg = <0x2c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 
 	gpio-controller;
 	#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index ade1ece8b45f..707fa98d1310 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -58,7 +58,7 @@  rt5682 {
 	compatible = "realtek,rt5682i";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;