[v2,28/41] ARM: s3c24xx: move iis pinctrl config into boards

Message ID	20200806182059.2431-28-krzk@kernel.org
State	Accepted
Commit	673085f450b218f51793af7ca7614c4149ab38a9
Headers	show Return-Path: <SRS0=T8Ko=BQ=alsa-project.org=alsa-devel-bounces@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 1604223106 From: Krzysztof Kozlowski <krzk@kernel.org> To: linux-kernel@vger.kernel.org Subject: [PATCH v2 28/41] ARM: s3c24xx: move iis pinctrl config into boards Date: Thu, 6 Aug 2020 20:20:45 +0200 Message-Id: <20200806182059.2431-28-krzk@kernel.org> In-Reply-To: <20200806181932.2253-1-krzk@kernel.org> References: <20200806181932.2253-1-krzk@kernel.org> Cc: alsa-devel@alsa-project.org, Alexandre Torgue <alexandre.torgue@st.com>, Arnd Bergmann <arnd@arndb.de>, Sangbeom Kim <sbkim73@samsung.com>, Takashi Iwai <tiwai@suse.com>, Russell King <linux@armlinux.org.uk>, Krzysztof Kozlowski <krzk@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Precedence: list Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" <alsa-devel-bounces@alsa-project.org>
Series	None \| expand [v2,24/41] ASoC: samsung: h1940: turn into platform driver [v2,26/41] ASoC: samsung: rx1950: turn into platform driver [v2,28/41] ARM: s3c24xx: move iis pinctrl config into boards

diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 46a80fae7056..3c7f2a3d00a5 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -538,6 +538,10 @@ static void __init gta02_machine_init(void) i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(&gta02_audio_gpio_table); platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); pm_power_off = gta02_poweroff; diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index c7269cd26ba8..1f18ac4e84b2 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -707,6 +707,9 @@ static void __init h1940_init(void) s3c24xx_fb_set_platdata(&h1940_fb_info); gpiod_add_lookup_table(&h1940_mmc_gpio_table); gpiod_add_lookup_table(&h1940_audio_gpio_table); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); s3c24xx_mci_set_platdata(&h1940_mmc_cfg); s3c24xx_udc_set_platdata(&h1940_udc_cfg); s3c24xx_ts_set_platdata(&h1940_ts_cfg); diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 65f48094114e..0bd2746f19a6 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -714,6 +714,11 @@ static void __init mini2440_init(void) s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); } + + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + if (features.lcd_index != -1) { int li; diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 152f09242579..9410fcb82340 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -36,6 +36,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -599,6 +600,10 @@ static void __init n30_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + if (machine_is_n30()) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 5385437ef464..ec23b115261e 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -143,6 +143,11 @@ static void __init nexcoder_init_time(void) static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); + + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); }; diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index e7eec5ccddb3..1f777ab4ced7 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -23,6 +23,8 @@ #include <asm/mach/irq.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -105,6 +107,10 @@ static void __init otom11_init_time(void) static void __init otom11_init(void) { s3c_i2c0_set_platdata(NULL); + + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices)); } diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 4ac3d0531992..5e33f3da629e 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -341,6 +341,9 @@ static void __init qt2410_machine_init(void) s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); gpiod_add_lookup_table(&qt2410_spi_gpiod_table); s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); gpiod_add_lookup_table(&qt2410_led_gpio_table); diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index a5461b2227bd..86d348f33972 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -828,6 +828,9 @@ static void __init rx1950_init_machine(void) pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); gpiod_add_lookup_table(&rx1950_audio_gpio_table); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); i2c_register_board_info(0, rx1950_i2c_devices, diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index 617392de01ac..fc197cee77a0 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -38,6 +38,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -197,6 +198,9 @@ static void __init rx3715_init_machine(void) s3c_nand_set_platdata(&rx3715_nand_info); s3c24xx_fb_set_platdata(&rx3715_fb_info); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); } diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index 1d4d8735f283..c78fe1d8802c 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -19,6 +19,8 @@ #include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -92,6 +94,9 @@ static void __init smdk2410_init(void) { s3c_i2c0_set_platdata(NULL); platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices)); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); smdk_machine_init(); } diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 9782cc3e698c..287bd502a030 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -37,6 +37,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <mach/gpio-samsung.h> #include <mach/fb.h> +#include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -118,6 +119,9 @@ static void __init smdk2413_machine_init(void) s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); s3c_i2c0_set_platdata(NULL); + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices)); smdk_machine_init(); diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index bd6a35105518..5939372ecec2 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -28,6 +28,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -165,7 +167,9 @@ static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); s3c_i2c0_set_platdata(NULL); - + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); smdk_machine_init(); } diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index f0acbaa6dfd6..c6e777aab24e 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -30,6 +30,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <mach/fb.h> @@ -147,7 +149,9 @@ static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); s3c_nand_set_platdata(&vstms_nand_info); - + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); } diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index cfe78bf8cc9b..af87261e6a59 100644 --- a/arch/arm/mach-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -13,6 +13,8 @@ #include <linux/io.h> #include <mach/regs-gpio.h> +#include <mach/gpio-samsung.h> +#include <plat/gpio-cfg.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> #include <plat/devs.h> @@ -64,6 +66,10 @@ int __init simtec_audio_add(const char *name, bool has_lr_routing, if (has_lr_routing) simtec_audio_platdata.startup = simtec_audio_startup_lrroute; + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + platform_device_register(&s3c_device_iis); platform_device_register(&simtec_audio_dev); return 0; diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index edfa9d11d2e5..81f416ac457e 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -19,9 +19,6 @@ #include <sound/soc.h> #include <sound/pcm_params.h> -#include <mach/gpio-samsung.h> -#include <plat/gpio-cfg.h> - #include "dma.h" #include "regs-i2s-v2.h" #include "s3c2412-i2s.h" @@ -70,10 +67,6 @@ static int s3c2412_i2s_probe(struct snd_soc_dai *dai) if (ret) goto err; - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - return 0; err: diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index 60bfaed5f7a6..50c08008aacb 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -18,10 +18,7 @@ #include <sound/soc.h> #include <sound/pcm_params.h> -#include <mach/gpio-samsung.h> -#include <plat/gpio-cfg.h> #include "regs-iis.h" - #include "dma.h" #include "s3c24xx-i2s.h" @@ -348,10 +345,6 @@ static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) if (ret) return ret; - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON); s3c24xx_snd_txctrl(0);

[v2,28/41] ARM: s3c24xx: move iis pinctrl config into boards

Commit Message

Patch