| Message ID | 1a69c3fa0291f991ffcf113ea222c713ba4d4ff0.1598264917.git.michal.simek@xilinx.com |
|---|---|
| State | Accepted |
| Commit | 9a19a39ee48b73a5dc84b3e102cda2219dfd5b0f |
| Headers | show |
| Series | arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 | expand |
po 24. 8. 2020 v 12:28 odesÃlatel Michal Simek <michal.simek@xilinx.com> napsal: > > Fix the leds subnode names to match (^led-[0-9a-f]$|led). > > Similar change has been also done by commit 08dc0e5dd9aa ("arm64: dts: > meson: fix leds subnodes name"). > > The patch is fixing this warning: > avnet-ultra96-rev1.dt.yaml: leds: 'ds2', 'ds3', 'ds4', 'ds5' do not match > any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' > > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > vbus-det led is not fixed because it is not LED. It should be likely > handled as gpio hog. > --- > arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts > index d60110ad8367..2352dc553ba7 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts > @@ -56,27 +56,27 @@ sw4 { > > leds { > compatible = "gpio-leds"; > - ds2 { > + led-ds2 { > label = "ds2"; > gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; > linux,default-trigger = "heartbeat"; > }; > > - ds3 { > + led-ds3 { > label = "ds3"; > gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; > linux,default-trigger = "phy0tx"; /* WLAN tx */ > default-state = "off"; > }; > > - ds4 { > + led-ds4 { > label = "ds4"; > gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; > linux,default-trigger = "phy0rx"; /* WLAN rx */ > default-state = "off"; > }; > > - ds5 { > + led-ds5 { > label = "ds5"; > gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; > linux,default-trigger = "bluetooth-power"; > -- > 2.28.0 > Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index d60110ad8367..2352dc553ba7 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -56,27 +56,27 @@ sw4 { leds { compatible = "gpio-leds"; - ds2 { + led-ds2 { label = "ds2"; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds3 { + led-ds3 { label = "ds3"; gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; /* WLAN tx */ default-state = "off"; }; - ds4 { + led-ds4 { label = "ds4"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0rx"; /* WLAN rx */ default-state = "off"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power";
Fix the leds subnode names to match (^led-[0-9a-f]$|led). Similar change has been also done by commit 08dc0e5dd9aa ("arm64: dts: meson: fix leds subnodes name"). The patch is fixing this warning: avnet-ultra96-rev1.dt.yaml: leds: 'ds2', 'ds3', 'ds4', 'ds5' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- vbus-det led is not fixed because it is not LED. It should be likely handled as gpio hog. --- arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)