diff mbox series

[v5,18/20] tools: gpio: port gpio-event-mon to v2 uAPI

Message ID 20200827140020.159627-19-warthog618@gmail.com
State Superseded
Headers show
Series [v5,01/20] gpiolib: cdev: desc_to_lineinfo should set info offset | expand

Commit Message

Kent Gibson Aug. 27, 2020, 2 p.m. UTC
Port the gpio-event-mon tool to the latest GPIO uAPI.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 tools/gpio/gpio-event-mon.c | 91 +++++++++++++++++++------------------
 1 file changed, 47 insertions(+), 44 deletions(-)
diff mbox series

Patch

diff --git a/tools/gpio/gpio-event-mon.c b/tools/gpio/gpio-event-mon.c
index 1a303a81aeef..d6a831200c18 100644
--- a/tools/gpio/gpio-event-mon.c
+++ b/tools/gpio/gpio-event-mon.c
@@ -23,17 +23,16 @@ 
 #include <sys/ioctl.h>
 #include <sys/types.h>
 #include <linux/gpio.h>
+#include "gpio-utils.h"
 
 int monitor_device(const char *device_name,
 		   unsigned int line,
-		   uint32_t handleflags,
-		   uint32_t eventflags,
+		   struct gpio_v2_line_config *config,
 		   unsigned int loops)
 {
-	struct gpioevent_request req;
-	struct gpiohandle_data data;
+	struct gpio_v2_line_values values;
 	char *chrdev_name;
-	int fd;
+	int cfd, lfd;
 	int ret;
 	int i = 0;
 
@@ -41,44 +40,39 @@  int monitor_device(const char *device_name,
 	if (ret < 0)
 		return -ENOMEM;
 
-	fd = open(chrdev_name, 0);
-	if (fd == -1) {
+	cfd = open(chrdev_name, 0);
+	if (cfd == -1) {
 		ret = -errno;
 		fprintf(stderr, "Failed to open %s\n", chrdev_name);
 		goto exit_free_name;
 	}
 
-	req.lineoffset = line;
-	req.handleflags = handleflags;
-	req.eventflags = eventflags;
-	strcpy(req.consumer_label, "gpio-event-mon");
-
-	ret = ioctl(fd, GPIO_GET_LINEEVENT_IOCTL, &req);
-	if (ret == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to issue GET EVENT "
-			"IOCTL (%d)\n",
-			ret);
-		goto exit_close_error;
-	}
+	ret = gpiotools_request_line(device_name, &line, 1, config,
+				     "gpio-event-mon");
+	if (ret < 0)
+		goto exit_device_close;
+	else
+		lfd = ret;
 
 	/* Read initial states */
-	ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data);
-	if (ret == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE "
-			"VALUES IOCTL (%d)\n",
+	values.mask = 1;
+	values.bits = 0;
+	ret = gpiotools_get_values(lfd, &values);
+	if (ret < 0) {
+		fprintf(stderr,
+			"Failed to issue GPIO LINE GET VALUES IOCTL (%d)\n",
 			ret);
-		goto exit_close_error;
+		goto exit_line_close;
 	}
 
 	fprintf(stdout, "Monitoring line %d on %s\n", line, device_name);
-	fprintf(stdout, "Initial line value: %d\n", data.values[0]);
+	fprintf(stdout, "Initial line value: %d\n",
+		gpiotools_test_bit(values.bits, 0));
 
 	while (1) {
-		struct gpioevent_data event;
+		struct gpio_v2_line_event event;
 
-		ret = read(req.fd, &event, sizeof(event));
+		ret = read(lfd, &event, sizeof(event));
 		if (ret == -1) {
 			if (errno == -EAGAIN) {
 				fprintf(stderr, "nothing available\n");
@@ -96,12 +90,14 @@  int monitor_device(const char *device_name,
 			ret = -EIO;
 			break;
 		}
-		fprintf(stdout, "GPIO EVENT %llu: ", event.timestamp);
+		fprintf(stdout, "GPIO EVENT at %llu on line %d (%d|%d) ",
+			event.timestamp, event.offset, event.line_seqno,
+			event.seqno);
 		switch (event.id) {
-		case GPIOEVENT_EVENT_RISING_EDGE:
+		case GPIO_V2_LINE_EVENT_RISING_EDGE:
 			fprintf(stdout, "rising edge");
 			break;
-		case GPIOEVENT_EVENT_FALLING_EDGE:
+		case GPIO_V2_LINE_EVENT_FALLING_EDGE:
 			fprintf(stdout, "falling edge");
 			break;
 		default:
@@ -114,8 +110,11 @@  int monitor_device(const char *device_name,
 			break;
 	}
 
-exit_close_error:
-	if (close(fd) == -1)
+exit_line_close:
+	if (close(lfd) == -1)
+		perror("Failed to close line file");
+exit_device_close:
+	if (close(cfd) == -1)
 		perror("Failed to close GPIO character device file");
 exit_free_name:
 	free(chrdev_name);
@@ -140,15 +139,20 @@  void print_usage(void)
 	);
 }
 
+#define EDGE_FLAGS \
+	(GPIO_V2_LINE_FLAG_EDGE_RISING | \
+	 GPIO_V2_LINE_FLAG_EDGE_FALLING)
+
 int main(int argc, char **argv)
 {
 	const char *device_name = NULL;
 	unsigned int line = -1;
 	unsigned int loops = 0;
-	uint32_t handleflags = GPIOHANDLE_REQUEST_INPUT;
-	uint32_t eventflags = 0;
+	struct gpio_v2_line_config config;
 	int c;
 
+	memset(&config, 0, sizeof(config));
+	config.flags = GPIO_V2_LINE_FLAG_INPUT;
 	while ((c = getopt(argc, argv, "c:n:o:dsrf?")) != -1) {
 		switch (c) {
 		case 'c':
@@ -161,16 +165,16 @@  int main(int argc, char **argv)
 			line = strtoul(optarg, NULL, 10);
 			break;
 		case 'd':
-			handleflags |= GPIOHANDLE_REQUEST_OPEN_DRAIN;
+			config.flags |= GPIO_V2_LINE_FLAG_OPEN_DRAIN;
 			break;
 		case 's':
-			handleflags |= GPIOHANDLE_REQUEST_OPEN_SOURCE;
+			config.flags |= GPIO_V2_LINE_FLAG_OPEN_SOURCE;
 			break;
 		case 'r':
-			eventflags |= GPIOEVENT_REQUEST_RISING_EDGE;
+			config.flags |= GPIO_V2_LINE_FLAG_EDGE_RISING;
 			break;
 		case 'f':
-			eventflags |= GPIOEVENT_REQUEST_FALLING_EDGE;
+			config.flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING;
 			break;
 		case '?':
 			print_usage();
@@ -182,11 +186,10 @@  int main(int argc, char **argv)
 		print_usage();
 		return -1;
 	}
-	if (!eventflags) {
+	if (!(config.flags & EDGE_FLAGS)) {
 		printf("No flags specified, listening on both rising and "
 		       "falling edges\n");
-		eventflags = GPIOEVENT_REQUEST_BOTH_EDGES;
+		config.flags |= EDGE_FLAGS;
 	}
-	return monitor_device(device_name, line, handleflags,
-			      eventflags, loops);
+	return monitor_device(device_name, line, &config, loops);
 }