diff mbox series

[RESEND,4/5] input: iqs269a: Add support for OTP variants

Message ID 1600289400-27632-5-git-send-email-jeff@labundy.com
State Superseded
Headers show
Series input: iqs269a: Add support for slider gestures and OTP variants | expand

Commit Message

Jeff LaBundy Sept. 16, 2020, 8:49 p.m. UTC
This patch adds support for each available OTP variant of the device.
The OTP configuration cannot be read over I2C, so it is derived from
a compatible string instead.

Early revisions of the D0 order code require their OTP-enabled func-
tionality to be manually restored following a soft reset; this patch
works around this erratum as well.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
 drivers/input/misc/iqs269a.c | 94 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 91 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c
index 095e5d5..04947f1 100644
--- a/drivers/input/misc/iqs269a.c
+++ b/drivers/input/misc/iqs269a.c
@@ -100,6 +100,11 @@ 
 #define IQS269_MISC_B_TRACKING_UI_ENABLE	BIT(4)
 #define IQS269_MISC_B_FILT_STR_SLIDER		GENMASK(1, 0)
 
+#define IQS269_TOUCH_HOLD_SLIDER_SEL		0x89
+#define IQS269_TOUCH_HOLD_DEFAULT		0x14
+#define IQS269_TOUCH_HOLD_MS_MIN		256
+#define IQS269_TOUCH_HOLD_MS_MAX		65280
+
 #define IQS269_TIMEOUT_TAP_MS_MAX		4080
 #define IQS269_TIMEOUT_SWIPE_MS_MAX		4080
 #define IQS269_THRESH_SWIPE_MAX			255
@@ -142,6 +147,10 @@ 
 #define IQS269_CHx_HALL_INACTIVE		6
 #define IQS269_CHx_HALL_ACTIVE			7
 
+#define IQS269_OTP_OPTION_DEFAULT		0x00
+#define IQS269_OTP_OPTION_TWS			0xD0
+#define IQS269_OTP_OPTION_HOLD			BIT(7)
+
 #define IQS269_HALL_PAD_R			BIT(0)
 #define IQS269_HALL_PAD_L			BIT(1)
 #define IQS269_HALL_PAD_INV			BIT(6)
@@ -322,6 +331,7 @@  struct iqs269_private {
 	unsigned int keycode[ARRAY_SIZE(iqs269_events) * IQS269_NUM_CH];
 	unsigned int gs_code[IQS269_NUM_SL][IQS269_NUM_GESTURES];
 	unsigned int suspend_mode;
+	unsigned int otp_option;
 	unsigned int delay_mult;
 	unsigned int ch_num;
 	bool hall_enable;
@@ -333,6 +343,14 @@  static enum iqs269_slider_id iqs269_slider_type(struct iqs269_private *iqs269,
 {
 	int i;
 
+	/*
+	 * Slider 1 is unavailable if the touch-and-hold option is enabled via
+	 * OTP. In that case, the channel selection register is repurposed for
+	 * the touch-and-hold timer ceiling.
+	 */
+	if (slider_num && (iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
+		return IQS269_SLIDER_NONE;
+
 	if (!iqs269->sys_reg.slider_select[slider_num])
 		return IQS269_SLIDER_NONE;
 
@@ -567,7 +585,8 @@  static int iqs269_parse_chan(struct iqs269_private *iqs269,
 	if (fwnode_property_present(ch_node, "azoteq,slider0-select"))
 		iqs269->sys_reg.slider_select[0] |= BIT(reg);
 
-	if (fwnode_property_present(ch_node, "azoteq,slider1-select"))
+	if (fwnode_property_present(ch_node, "azoteq,slider1-select") &&
+	    !(iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
 		iqs269->sys_reg.slider_select[1] |= BIT(reg);
 
 	ch_reg = &iqs269->ch_reg[reg];
@@ -999,7 +1018,43 @@  static int iqs269_parse_prop(struct iqs269_private *iqs269)
 	sys_reg->blocking = 0;
 
 	sys_reg->slider_select[0] = 0;
-	sys_reg->slider_select[1] = 0;
+
+	/*
+	 * If configured via OTP to do so, the device asserts a pulse on the
+	 * GPIO4 pin for approximately 60 ms once a selected channel is held
+	 * in a state of touch for a configurable length of time.
+	 *
+	 * In that case, the register used for slider 1 channel selection is
+	 * repurposed for the touch-and-hold timer ceiling.
+	 */
+	if (iqs269->otp_option & IQS269_OTP_OPTION_HOLD) {
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,touch-hold-ms", &val)) {
+			if (val < IQS269_TOUCH_HOLD_MS_MIN ||
+			    val > IQS269_TOUCH_HOLD_MS_MAX) {
+				dev_err(&client->dev,
+					"Invalid touch-and-hold ceiling: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->slider_select[1] = val / 256;
+		} else if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
+			/*
+			 * The default touch-and-hold timer ceiling initially
+			 * read from early revisions of silicon is invalid if
+			 * the device experienced a soft reset between power-
+			 * on and the read operation.
+			 *
+			 * To protect against this case, explicitly cache the
+			 * default value so that it is restored each time the
+			 * device is re-initialized.
+			 */
+			sys_reg->slider_select[1] = IQS269_TOUCH_HOLD_DEFAULT;
+		}
+	} else {
+		sys_reg->slider_select[1] = 0;
+	}
 
 	sys_reg->event_mask = ~((u8)IQS269_EVENT_MASK_SYS);
 
@@ -1140,6 +1195,12 @@  static int iqs269_parse_prop(struct iqs269_private *iqs269)
 	return 0;
 }
 
+static const struct reg_sequence iqs269_tws_init[] = {
+	{ IQS269_TOUCH_HOLD_SLIDER_SEL, IQS269_TOUCH_HOLD_DEFAULT },
+	{ 0xF0, 0x580F },
+	{ 0xF0, 0x59EF },
+};
+
 static int iqs269_dev_init(struct iqs269_private *iqs269)
 {
 	struct iqs269_sys_reg *sys_reg = &iqs269->sys_reg;
@@ -1149,6 +1210,18 @@  static int iqs269_dev_init(struct iqs269_private *iqs269)
 
 	mutex_lock(&iqs269->lock);
 
+	/*
+	 * Early revisions of silicon require the following workaround in order
+	 * to restore any OTP-enabled functionality after a soft reset.
+	 */
+	if (iqs269->otp_option == IQS269_OTP_OPTION_TWS &&
+	    iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
+		error = regmap_multi_reg_write(iqs269->regmap, iqs269_tws_init,
+					       ARRAY_SIZE(iqs269_tws_init));
+		if (error)
+			goto err_mutex;
+	}
+
 	error = regmap_update_bits(iqs269->regmap, IQS269_HALL_UI,
 				   IQS269_HALL_UI_ENABLE,
 				   iqs269->hall_enable ? ~0 : 0);
@@ -1807,6 +1880,10 @@  static int iqs269_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, iqs269);
 	iqs269->client = client;
 
+	if (client->dev.of_node)
+		iqs269->otp_option = (uintptr_t)
+				     of_device_get_match_data(&client->dev);
+
 	iqs269->regmap = devm_regmap_init_i2c(client, &iqs269_regmap_config);
 	if (IS_ERR(iqs269->regmap)) {
 		error = PTR_ERR(iqs269->regmap);
@@ -1967,7 +2044,18 @@  static int __maybe_unused iqs269_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(iqs269_pm, iqs269_suspend, iqs269_resume);
 
 static const struct of_device_id iqs269_of_match[] = {
-	{ .compatible = "azoteq,iqs269a" },
+	{
+		.compatible = "azoteq,iqs269a",
+		.data = (void *)IQS269_OTP_OPTION_DEFAULT,
+	},
+	{
+		.compatible = "azoteq,iqs269a-00",
+		.data = (void *)IQS269_OTP_OPTION_DEFAULT,
+	},
+	{
+		.compatible = "azoteq,iqs269a-d0",
+		.data = (void *)IQS269_OTP_OPTION_TWS,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, iqs269_of_match);