diff mbox series

[2/2] DT: leds: Add an optional property named 'sdb-gpios'

Message ID 20200806062130.25187-2-von81@163.com
State New
Headers show
Series None | expand

Commit Message

Grant Feng Aug. 6, 2020, 6:21 a.m. UTC 
The chip enters hardware shutdown when the SDB pin is pulled low.
The chip releases hardware shutdown when the SDB pin is pulled high.

Signed-off-by: Grant Feng <von81@163.com>
---
 Documentation/devicetree/bindings/leds/leds-is31fl319x.txt | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
index fc2603484544..e8bef4be57dc 100644
--- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
@@ -16,6 +16,7 @@  Optional properties:
 - audio-gain-db : audio gain selection for external analog modulation input.
 	Valid values: 0 - 21, step by 3 (rounded down)
 	Default: 0
+- sdb-gpios : Specifier of the GPIO connected to SDB pin.
 
 Each led is represented as a sub-node of the issi,is31fl319x device.
 There can be less leds subnodes than the chip can support but not more.
@@ -44,6 +45,7 @@  fancy_leds: leds@65 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	reg = <0x65>;
+	sdb-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
 
 	red_aux: led@1 {
 		label = "red:aux";