@@ -28,26 +28,18 @@
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- fin_pll: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
+ fin_pll: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
};
srom-cs1@18000000 {
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/s3c6410-smdk6410.dts | 30 ++++++++++---------------- 1 file changed, 11 insertions(+), 19 deletions(-)