mbox

[GIT,PULL] ARM: imx: device tree changes for 3.15, take 2

Message ID 20140305050632.GA23980@S2101-09.ap.freescale.net
State New
Headers show

Pull-request

git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.15-2

Message

Shawn Guo March 5, 2014, 5:06 a.m. UTC
Hi,

This is the second round of imx device tree changes for 3.15, which is
based on the first round pull request - tag imx-dt-3.15.  Please pull,
thanks.

Shawn

The following changes since commit ee97d154f0a81f87f0f88c99a3963da2ab5ad787:

  ARM: dts: imx28-m28cu3: Remove 'reset-active-high' (2014-02-09 21:33:52 +0800)

are available in the git repository at:

  git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.15-2

for you to fetch changes up to b4e5e84ddfc57fa269fa50d178ad95d49be33a28:

  ARM: dts: vf610: i2c: Add eDMA support (2014-02-27 20:33:33 +0800)

----------------------------------------------------------------
i.MX device tree changes for 3.15, take 2:
 - Cleanup and device additions for imx27-phytec-phycard boards
 - eDMA and audio support for vf610-twr board
 - Minor updates and fixes for a couple of imx28 and imx5 boards

----------------------------------------------------------------
Alexander Shiyan (8):
      ARM: dts: imx27-phytec-phycard-s-som: Sort entries
      ARM: dts: imx27-phytec-phycard-s-som: Add NFC node
      ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2
      ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
      ARM: dts: imx27-phytec-phycore: Add diagnostic PMIC LEDs
      ARM: dts: i.MX27: Add USB nodes
      ARM: dts: imx27-phytec-phycore-rdk: Add USBH2 node
      ARM: dts: imx27-phytec-phycore-som: Add USBOTG node

Fabio Estevam (2):
      ARM: dts: mx53: Remove 'enable-active-low' property
      ARM: dts: imx28-tx28: Remove 'enable-active-low' property

Fugang Duan (1):
      ARM: dts: vf610-twr: Add ADC support

Jingchang Lu (1):
      ARM: dts: vf610: Add eDMA node

Liu Ying (1):
      ARM: dts: i.MX51 babbage: Support diagnostic LED

Marek Vasut (1):
      ARM: dts: mxs: Fix the RTC compatible prop on M28EVK

Xiubo Li (4):
      ARM: dts: vf610: Add edma mux Tx and Rx support for SAI node.
      ARM: dts: vf610-twr: Enable SAI ALSA SoC DAI device
      ARM: dts: vf610-twr: Enable SGTL5000 codec.
      ARM: dts: vf610-twr: Add simple-card support.

Yuan Yao (2):
      ARM: dts: vf610: lpuart: Add eDMA support
      ARM: dts: vf610: i2c: Add eDMA support

 arch/arm/boot/dts/Makefile                         |    1 -
 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts   |   16 +++-
 ...d-s-som.dts => imx27-phytec-phycard-s-som.dtsi} |   49 ++++++++---
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts     |   81 +++++++++++++++++
 arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi    |   44 ++++++++++
 arch/arm/boot/dts/imx27.dtsi                       |   56 ++++++++++++
 arch/arm/boot/dts/imx28-m28evk.dts                 |    2 +-
 arch/arm/boot/dts/imx28-tx28.dts                   |    1 -
 arch/arm/boot/dts/imx51-babbage.dts                |   17 ++++
 arch/arm/boot/dts/imx53-m53evk.dts                 |    1 -
 arch/arm/boot/dts/imx53-mba53.dts                  |    1 -
 arch/arm/boot/dts/imx53-tx53.dtsi                  |    1 -
 arch/arm/boot/dts/vf610-twr.dts                    |   92 ++++++++++++++++++++
 arch/arm/boot/dts/vf610.dtsi                       |   66 ++++++++++++++
 14 files changed, 407 insertions(+), 21 deletions(-)
 rename arch/arm/boot/dts/{imx27-phytec-phycard-s-som.dts => imx27-phytec-phycard-s-som.dtsi} (81%)

Comments

Olof Johansson March 9, 2014, 7:02 p.m. UTC | #1
On Wed, Mar 05, 2014 at 01:06:34PM +0800, Shawn Guo wrote:
> Hi,
> 
> This is the second round of imx device tree changes for 3.15, which is
> based on the first round pull request - tag imx-dt-3.15.  Please pull,
> thanks.
> 
> Shawn
> 
> The following changes since commit ee97d154f0a81f87f0f88c99a3963da2ab5ad787:
> 
>   ARM: dts: imx28-m28cu3: Remove 'reset-active-high' (2014-02-09 21:33:52 +0800)
> 
> are available in the git repository at:
> 
>   git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.15-2
> 
> for you to fetch changes up to b4e5e84ddfc57fa269fa50d178ad95d49be33a28:
> 
>   ARM: dts: vf610: i2c: Add eDMA support (2014-02-27 20:33:33 +0800)


Pulled, thanks.


-Olof