diff mbox series

[1/2] usb: typec: intel_pmc_mux: Do not configure Altmode HPD High

Message ID 20200907142152.35678-2-heikki.krogerus@linux.intel.com
State New
Headers show
Series Fixes for the Intel PMC mux driver | expand

Commit Message

Heikki Krogerus Sept. 7, 2020, 2:21 p.m. UTC 
From: Utkarsh Patel <utkarsh.h.patel@intel.com>

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.7, bit 14 is reserved in Alternate mode.
In DP Alternate Mode state, if the HPD_STATE (bit 7) field in the
status update command VDO is set to HPD_HIGH, HPD is configured via
separate HPD mode request after configuring DP Alternate mode request.
Configuring reserved bit may show unexpected behaviour.
So do not configure them while issuing the Alternate Mode request.

Fixes: 7990be48ef4d ("usb: typec: mux: intel: Handle alt mode HPD_HIGH")
Cc: stable@vger.kernel.org
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/usb/typec/mux/intel_pmc_mux.c | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index e4021e13af40a..802d443b367c6 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -68,7 +68,6 @@  enum {
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
 
 /* TBT specific Mode Data bits */
-#define PMC_USB_ALTMODE_HPD_HIGH	BIT(14)
 #define PMC_USB_ALTMODE_TBT_TYPE	BIT(17)
 #define PMC_USB_ALTMODE_CABLE_TYPE	BIT(18)
 #define PMC_USB_ALTMODE_ACTIVE_LINK	BIT(20)
@@ -185,9 +184,6 @@  pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
-	if (data->status & DP_STATUS_HPD_STATE)
-		req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
-
 	ret = pmc_usb_command(port, (void *)&req, sizeof(req));
 	if (ret)
 		return ret;