diff mbox series

[v2,12/22] mac80211: convert S1G beacon to scan results

Message ID 20200831205600.21058-13-thomas@adapt-ip.com
State New
Headers show
Series add support for S1G association | expand

Commit Message

Thomas Pedersen Aug. 31, 2020, 8:55 p.m. UTC
This commit finds the correct offset for Information
Elements in S1G beacon frames so they can be reported in
scan results, and track whether a given BSS is S1G.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/ieee80211_i.h |  7 +++++++
 net/mac80211/rx.c          |  3 ++-
 net/mac80211/scan.c        | 20 ++++++++++++++++----
 net/mac80211/util.c        | 28 ++++++++++++++++++++++++++++
 4 files changed, 53 insertions(+), 5 deletions(-)

Comments

Johannes Berg Sept. 18, 2020, 10:48 a.m. UTC | #1
On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:

>  

> +	if (!elems->parse_error && elems->s1g_capab)

> +		bss->s1g = true;


It seems odd to set this only if it's in error - why not always set it
if the band is right?

In fact, why set it at all, since you always know the band?

> +		case WLAN_EID_S1G_CAPABILITIES:

> +			if (elen == 15)

> +				elems->s1g_capab = (void *)pos;

> +			else

> +				elem_parse_failed = true;

> +			break;

> +		case WLAN_EID_S1G_OPERATION:

> +			if (elen == 6)

> +				elems->s1g_oper = (void *)pos;

> +			else

> +				elem_parse_failed = true;

> +			break;

> +		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:

> +			if (elen == 2)

> +				elems->s1g_tsbtt = (void *)pos;

> +			else

> +				elem_parse_failed = true;

> +			break;


Seems like you ought to have some structs/sizeof or defines for the
sizes?

johannes
Thomas Pedersen Sept. 21, 2020, 5:45 a.m. UTC | #2
On 2020-09-18 03:48, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:

> 

>> 

>> +	if (!elems->parse_error && elems->s1g_capab)

>> +		bss->s1g = true;

> 

> It seems odd to set this only if it's in error - why not always set it

> if the band is right?


True.

> In fact, why set it at all, since you always know the band?


It seemed like a convenient shorthand, but looking at 
net/mac80211/mlme.c the
band/channel is available (sband->band or cbss->channel->band) wherever 
we
check s1g->bss so maybe it's not needed. I'll remove it to keep things
simple.

>> +		case WLAN_EID_S1G_CAPABILITIES:

>> +			if (elen == 15)

>> +				elems->s1g_capab = (void *)pos;

>> +			else

>> +				elem_parse_failed = true;

>> +			break;

>> +		case WLAN_EID_S1G_OPERATION:

>> +			if (elen == 6)

>> +				elems->s1g_oper = (void *)pos;

>> +			else

>> +				elem_parse_failed = true;

>> +			break;

>> +		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:

>> +			if (elen == 2)

>> +				elems->s1g_tsbtt = (void *)pos;

>> +			else

>> +				elem_parse_failed = true;

>> +			break;

> 

> Seems like you ought to have some structs/sizeof or defines for the

> sizes?


Yes I'll find something. Thanks.

-- 
thomas
diff mbox series

Patch

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 9363f43887b4..8bbdc27d57c6 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -127,6 +127,9 @@  struct ieee80211_bss {
 
 	/* Keep track of what bits of information we have valid info for. */
 	u8 valid_data;
+
+	/* BSS info was transmitted by an S1G STA */
+	u8 s1g;
 };
 
 /**
@@ -1524,6 +1527,10 @@  struct ieee802_11_elems {
 	u8 dtim_count;
 	u8 dtim_period;
 	const struct ieee80211_addba_ext_ie *addba_ext_ie;
+	const struct ieee80211_s1g_cap *s1g_capab;
+	const struct ieee80211_s1g_oper_ie *s1g_oper;
+	const u8 *s1g_tsbtt;
+	const struct ieee80211_s1g_bcn_compat_ie *s1g_bcn_compat;
 
 	/* length of them, respectively */
 	u8 ext_capab_len;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 836cde516a18..5b92f56682e2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4586,7 +4586,8 @@  static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 	ieee80211_verify_alignment(&rx);
 
 	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control) ||
-		     ieee80211_is_beacon(hdr->frame_control)))
+		     ieee80211_is_beacon(hdr->frame_control) ||
+		     ieee80211_is_s1g_beacon(hdr->frame_control)))
 		ieee80211_scan_rx(local, skb);
 
 	if (ieee80211_is_data(fc)) {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 5002791fe165..3dd65b7c839b 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -124,6 +124,9 @@  ieee80211_update_bss_from_elems(struct ieee80211_local *local,
 			bss->valid_data |= IEEE80211_BSS_VALID_WMM;
 	}
 
+	if (!elems->parse_error && elems->s1g_capab)
+		bss->s1g = true;
+
 	if (beacon) {
 		struct ieee80211_supported_band *sband =
 			local->hw.wiphy->bands[rx_status->band];
@@ -146,7 +149,8 @@  ieee80211_bss_info_update(struct ieee80211_local *local,
 			  struct ieee80211_mgmt *mgmt, size_t len,
 			  struct ieee80211_channel *channel)
 {
-	bool beacon = ieee80211_is_beacon(mgmt->frame_control);
+	bool beacon = ieee80211_is_beacon(mgmt->frame_control) ||
+		      ieee80211_is_s1g_beacon(mgmt->frame_control);
 	struct cfg80211_bss *cbss, *non_tx_cbss;
 	struct ieee80211_bss *bss, *non_tx_bss;
 	struct cfg80211_inform_bss bss_meta = {
@@ -195,6 +199,11 @@  ieee80211_bss_info_update(struct ieee80211_local *local,
 		elements = mgmt->u.probe_resp.variable;
 		baselen = offsetof(struct ieee80211_mgmt,
 				   u.probe_resp.variable);
+	} else if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		baselen = offsetof(struct ieee80211_ext, u.s1g_beacon.variable);
+		elements = ext->u.s1g_beacon.variable;
 	} else {
 		baselen = offsetof(struct ieee80211_mgmt, u.beacon.variable);
 		elements = mgmt->u.beacon.variable;
@@ -246,9 +255,12 @@  void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 	struct ieee80211_bss *bss;
 	struct ieee80211_channel *channel;
 
-	if (skb->len < 24 ||
-	    (!ieee80211_is_probe_resp(mgmt->frame_control) &&
-	     !ieee80211_is_beacon(mgmt->frame_control)))
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		if (skb->len < 15)
+			return;
+	} else if (skb->len < 24 ||
+		 (!ieee80211_is_probe_resp(mgmt->frame_control) &&
+		  !ieee80211_is_beacon(mgmt->frame_control)))
 		return;
 
 	sdata1 = rcu_dereference(local->scan_sdata);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 27b2f1ceca69..e474b2bf227b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1003,6 +1003,10 @@  _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 		case WLAN_EID_LINK_ID:
 		case WLAN_EID_BSS_MAX_IDLE_PERIOD:
 		case WLAN_EID_RSNX:
+		case WLAN_EID_S1G_BCN_COMPAT:
+		case WLAN_EID_S1G_CAPABILITIES:
+		case WLAN_EID_S1G_OPERATION:
+		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
 		/*
 		 * not listing WLAN_EID_CHANNEL_SWITCH_WRAPPER -- it seems possible
 		 * that if the content gets bigger it might be needed more than once
@@ -1288,6 +1292,30 @@  _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 								&crc : NULL,
 							  elem, elems);
 			break;
+		case WLAN_EID_S1G_CAPABILITIES:
+			if (elen == 15)
+				elems->s1g_capab = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_OPERATION:
+			if (elen == 6)
+				elems->s1g_oper = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
+			if (elen == 2)
+				elems->s1g_tsbtt = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_BCN_COMPAT:
+			if (elen == sizeof(struct ieee80211_s1g_bcn_compat_ie))
+				elems->s1g_bcn_compat = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
 		default:
 			break;
 		}