@@ -8368,19 +8368,32 @@ static void ath10k_mac_get_rate_flags_ht(struct ath10k *ar, u32 rate, u8 nss, u8
u8 *flags, u8 *bw)
{
struct ath10k_index_ht_data_rate_type *mcs_rate;
+ u8 index;
+ size_t len_nss1 = ARRAY_SIZE(supported_ht_mcs_rate_nss1);
+ size_t len_nss2 = ARRAY_SIZE(supported_ht_mcs_rate_nss2);
+
+ if (mcs >= (len_nss1 + len_nss2)) {
+ ath10k_warn(ar, "not supported mcs %d in current rate table", mcs);
+ return;
+ }
mcs_rate = (struct ath10k_index_ht_data_rate_type *)
((nss == 1) ? &supported_ht_mcs_rate_nss1 :
&supported_ht_mcs_rate_nss2);
- if (rate == mcs_rate[mcs].supported_rate[0]) {
+ if (mcs >= len_nss1)
+ index = mcs - len_nss1;
+ else
+ index = mcs;
+
+ if (rate == mcs_rate[index].supported_rate[0]) {
*bw = RATE_INFO_BW_20;
- } else if (rate == mcs_rate[mcs].supported_rate[1]) {
+ } else if (rate == mcs_rate[index].supported_rate[1]) {
*bw |= RATE_INFO_BW_40;
- } else if (rate == mcs_rate[mcs].supported_rate[2]) {
+ } else if (rate == mcs_rate[index].supported_rate[2]) {
*bw |= RATE_INFO_BW_20;
*flags |= RATE_INFO_FLAGS_SHORT_GI;
- } else if (rate == mcs_rate[mcs].supported_rate[3]) {
+ } else if (rate == mcs_rate[index].supported_rate[3]) {
*bw |= RATE_INFO_BW_40;
*flags |= RATE_INFO_FLAGS_SHORT_GI;
} else {
@@ -8441,6 +8454,9 @@ static void ath10k_mac_parse_bitrate(struct ath10k *ar, u32 rate_code,
u8 mcs = WMI_TLV_GET_HW_RC_RATE_V1(rate_code);
u8 flags = 0, bw = 0;
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac parse rate code 0x%x bitrate %d kbps\n",
+ rate_code, bitrate_kbps);
+
if (preamble == WMI_RATE_PREAMBLE_HT)
mode = ATH10K_PHY_MODE_HT;
else if (preamble == WMI_RATE_PREAMBLE_VHT)
The mcs index of HT mode is 0 to 31, please refer http://mcsindex.com/. Its spatial stream(Nss) number is from 1 to 4, mcs index is 0~7 for Nss=1, 8~15 for Nss=2, 16~23 for Nss=3 and 24~31 is for Nss=4. The mcs is reported from firmware in wmi_tlv_peer_stats_info of event WMI_TLV_PEER_STATS_INFO_EVENTID, its range is from 0~15 for QCA6174 SDIO and PCIe. It is for both Nss=1 and Nss=2, and it has 2 rate table supported_ht_mcs_rate_nss1 and supported_ht_mcs_rate_nss2 in ath10k, they are for Nss=1 and Nss=2, each table has 8 rates. It need to find the matched row number with the mcs index, for example, mcs index is 2, it is <=7, so it is Nss=1, and match row 2 in table of Nss=1. If mcs index is 12, it is >= 8 and <= 15, so it is Nss=2, it match row 4(12-8) in table of Nss=2. If mcs index is >=16, it is for Nss=3/4, it need to add rate table, so it is not support in current ath10k. This patch is to find the row number in rate table of Nss=1 or Nss=2 with the mcs index reported from firmware. This patch only effect the chips which supports_peer_stats_info of its hw_params is true, it is true only for QCA6174 currently. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/mac.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)