diff mbox series

[v3,net-next] net: phy: mchp: Add support for LAN8814 QUAD PHY

Message ID 20200911131844.24371-1-Divya.Koppera@microchip.com
State Superseded
Headers show
Series [v3,net-next] net: phy: mchp: Add support for LAN8814 QUAD PHY | expand

Commit Message

Divya Koppera Sept. 11, 2020, 1:18 p.m. UTC
LAN8814 is a low-power, quad-port triple-speed (10BASE-T/100BASETX/1000BASE-T)
Ethernet physical layer transceiver (PHY). It supports transmission and
reception of data on standard CAT-5, as well as CAT-5e and CAT-6, unshielded
twisted pair (UTP) cables.

LAN8814 supports industry-standard QSGMII (Quad Serial Gigabit Media
Independent Interface) and Q-USGMII (Quad Universal Serial Gigabit Media
Independent Interface) providing chip-to-chip connection to four Gigabit
Ethernet MACs using a single serialized link (differential pair) in each
direction.

The LAN8814 SKU supports high-accuracy timestamping functions to
support IEEE-1588 solutions using Microchip Ethernet switches, as well as
customer solutions based on SoCs and FPGAs.

The LAN8804 SKU has same features as that of LAN8814 SKU except that it does
not support 1588, SyncE, or Q-USGMII with PCH/MCH.

This adds support for 10BASE-T, 100BASE-TX, and 1000BASE-T,
QSGMII link with the MAC.

Signed-off-by: Divya Koppera<divya.koppera@microchip.com>
---
v1 -> v2:
* Removing get_features and config_init as the Errata mentioned and other
  functionality related things are not applicable for this phy.
  Addressed review comments.
---
v2 -> v3:
* As v2 contains only diff of v1 and v2, correcting mistake and sending
  whole patch with addressed comments in v2.
---
 drivers/net/phy/micrel.c   | 14 ++++++++++++++
 include/linux/micrel_phy.h |  1 +
 2 files changed, 15 insertions(+)

Comments

David Miller Sept. 12, 2020, 12:42 a.m. UTC | #1
From: Divya Koppera <Divya.Koppera@microchip.com>
Date: Fri, 11 Sep 2020 18:48:44 +0530

> LAN8814 is a low-power, quad-port triple-speed (10BASE-T/100BASETX/1000BASE-T)
> Ethernet physical layer transceiver (PHY). It supports transmission and
> reception of data on standard CAT-5, as well as CAT-5e and CAT-6, unshielded
> twisted pair (UTP) cables.
> 
> LAN8814 supports industry-standard QSGMII (Quad Serial Gigabit Media
> Independent Interface) and Q-USGMII (Quad Universal Serial Gigabit Media
> Independent Interface) providing chip-to-chip connection to four Gigabit
> Ethernet MACs using a single serialized link (differential pair) in each
> direction.
> 
> The LAN8814 SKU supports high-accuracy timestamping functions to
> support IEEE-1588 solutions using Microchip Ethernet switches, as well as
> customer solutions based on SoCs and FPGAs.
> 
> The LAN8804 SKU has same features as that of LAN8814 SKU except that it does
> not support 1588, SyncE, or Q-USGMII with PCH/MCH.
> 
> This adds support for 10BASE-T, 100BASE-TX, and 1000BASE-T,
> QSGMII link with the MAC.
> 
> Signed-off-by: Divya Koppera<divya.koppera@microchip.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3fe552675dd2..a7f74b3b97af 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1314,6 +1314,19 @@  static struct phy_driver ksphy_driver[] = {
 	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_LAN8814,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip INDY Gigabit Quad PHY",
+	.driver_data	= &ksz9021_type,
+	.probe		= kszphy_probe,
+	.soft_reset	= genphy_soft_reset,
+	.read_status	= ksz9031_read_status,
+	.get_sset_count	= kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= kszphy_resume,
 }, {
 	.phy_id		= PHY_ID_KSZ9131,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
@@ -1387,6 +1400,7 @@  static struct mdio_device_id __maybe_unused micrel_tbl[] = {
 	{ PHY_ID_KSZ8081, MICREL_PHY_ID_MASK },
 	{ PHY_ID_KSZ8873MLL, MICREL_PHY_ID_MASK },
 	{ PHY_ID_KSZ886X, MICREL_PHY_ID_MASK },
+	{ PHY_ID_LAN8814, MICREL_PHY_ID_MASK },
 	{ }
 };
 
diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
index 75f880c25bb8..416ee6dd2574 100644
--- a/include/linux/micrel_phy.h
+++ b/include/linux/micrel_phy.h
@@ -27,6 +27,7 @@ 
 #define PHY_ID_KSZ8061		0x00221570
 #define PHY_ID_KSZ9031		0x00221620
 #define PHY_ID_KSZ9131		0x00221640
+#define PHY_ID_LAN8814		0x00221660
 
 #define PHY_ID_KSZ886X		0x00221430
 #define PHY_ID_KSZ8863		0x00221435