@@ -515,6 +515,208 @@ static int compare_versions(const char *a, const char *b)
return a_patch - b_patch;
}
+enum ef100_tlv_state_machine {
+ EF100_TLV_TYPE,
+ EF100_TLV_TYPE_CONT,
+ EF100_TLV_LENGTH,
+ EF100_TLV_VALUE
+};
+
+struct ef100_tlv_state {
+ enum ef100_tlv_state_machine state;
+ u64 value;
+ u32 value_offset;
+ u16 type;
+ u8 len;
+};
+
+static int ef100_tlv_feed(struct ef100_tlv_state *state, u8 byte)
+{
+ switch (state->state) {
+ case EF100_TLV_TYPE:
+ state->type = byte & 0x7f;
+ state->state = (byte & 0x80) ? EF100_TLV_TYPE_CONT
+ : EF100_TLV_LENGTH;
+ /* Clear ready to read in a new entry */
+ state->value = 0;
+ state->value_offset = 0;
+ return 0;
+ case EF100_TLV_TYPE_CONT:
+ state->type |= byte << 7;
+ state->state = EF100_TLV_LENGTH;
+ return 0;
+ case EF100_TLV_LENGTH:
+ state->len = byte;
+ /* We only handle TLVs that fit in a u64 */
+ if (state->len > sizeof(state->value))
+ return -EOPNOTSUPP;
+ /* len may be zero, implying a value of zero */
+ state->state = state->len ? EF100_TLV_VALUE : EF100_TLV_TYPE;
+ return 0;
+ case EF100_TLV_VALUE:
+ state->value |= ((u64)byte) << (state->value_offset * 8);
+ state->value_offset++;
+ if (state->value_offset >= state->len)
+ state->state = EF100_TLV_TYPE;
+ return 0;
+ default: /* state machine error, can't happen */
+ WARN_ON_ONCE(1);
+ return -EIO;
+ }
+}
+
+static int ef100_process_design_param(struct efx_nic *efx,
+ const struct ef100_tlv_state *reader)
+{
+ struct ef100_nic_data *nic_data = efx->nic_data;
+
+ switch (reader->type) {
+ case ESE_EF100_DP_GZ_PAD: /* padding, skip it */
+ return 0;
+ case ESE_EF100_DP_GZ_PARTIAL_TSTAMP_SUB_NANO_BITS:
+ /* Driver doesn't support timestamping yet, so we don't care */
+ return 0;
+ case ESE_EF100_DP_GZ_EVQ_UNSOL_CREDIT_SEQ_BITS:
+ /* Driver doesn't support unsolicited-event credits yet, so
+ * we don't care
+ */
+ return 0;
+ case ESE_EF100_DP_GZ_NMMU_GROUP_SIZE:
+ /* Driver doesn't manage the NMMU (so we don't care) */
+ return 0;
+ case ESE_EF100_DP_GZ_RX_L4_CSUM_PROTOCOLS:
+ /* Driver uses CHECKSUM_COMPLETE, so we don't care about
+ * protocol checksum validation
+ */
+ return 0;
+ case ESE_EF100_DP_GZ_TSO_MAX_HDR_LEN:
+ nic_data->tso_max_hdr_len = min_t(u64, reader->value, 0xffff);
+ return 0;
+ case ESE_EF100_DP_GZ_TSO_MAX_HDR_NUM_SEGS:
+ /* We always put HDR_NUM_SEGS=1 in our TSO descriptors */
+ if (!reader->value) {
+ netif_err(efx, probe, efx->net_dev,
+ "TSO_MAX_HDR_NUM_SEGS < 1\n");
+ return -EOPNOTSUPP;
+ }
+ return 0;
+ case ESE_EF100_DP_GZ_RXQ_SIZE_GRANULARITY:
+ case ESE_EF100_DP_GZ_TXQ_SIZE_GRANULARITY:
+ /* Our TXQ and RXQ sizes are always power-of-two and thus divisible by
+ * EFX_MIN_DMAQ_SIZE, so we just need to check that
+ * EFX_MIN_DMAQ_SIZE is divisible by GRANULARITY.
+ * This is very unlikely to fail.
+ */
+ if (EFX_MIN_DMAQ_SIZE % reader->value) {
+ netif_err(efx, probe, efx->net_dev,
+ "%s size granularity is %llu, can't guarantee safety\n",
+ reader->type == ESE_EF100_DP_GZ_RXQ_SIZE_GRANULARITY ? "RXQ" : "TXQ",
+ reader->value);
+ return -EOPNOTSUPP;
+ }
+ return 0;
+ case ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_LEN:
+ nic_data->tso_max_payload_len = min_t(u64, reader->value, GSO_MAX_SIZE);
+ efx->net_dev->gso_max_size = nic_data->tso_max_payload_len;
+ return 0;
+ case ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_NUM_SEGS:
+ nic_data->tso_max_payload_num_segs = min_t(u64, reader->value, 0xffff);
+ efx->net_dev->gso_max_segs = nic_data->tso_max_payload_num_segs;
+ return 0;
+ case ESE_EF100_DP_GZ_TSO_MAX_NUM_FRAMES:
+ nic_data->tso_max_frames = min_t(u64, reader->value, 0xffff);
+ return 0;
+ case ESE_EF100_DP_GZ_COMPAT:
+ if (reader->value) {
+ netif_err(efx, probe, efx->net_dev,
+ "DP_COMPAT has unknown bits %#llx, driver not compatible with this hw\n",
+ reader->value);
+ return -EOPNOTSUPP;
+ }
+ return 0;
+ case ESE_EF100_DP_GZ_MEM2MEM_MAX_LEN:
+ /* Driver doesn't use mem2mem transfers */
+ return 0;
+ case ESE_EF100_DP_GZ_EVQ_TIMER_TICK_NANOS:
+ /* Driver doesn't currently use EVQ_TIMER */
+ return 0;
+ case ESE_EF100_DP_GZ_NMMU_PAGE_SIZES:
+ /* Driver doesn't manage the NMMU (so we don't care) */
+ return 0;
+ case ESE_EF100_DP_GZ_VI_STRIDES:
+ /* We never try to set the VI stride, and we don't rely on
+ * being able to find VIs past VI 0 until after we've learned
+ * the current stride from MC_CMD_GET_CAPABILITIES.
+ * So the value of this shouldn't matter.
+ */
+ if (reader->value != ESE_EF100_DP_GZ_VI_STRIDES_DEFAULT)
+ netif_dbg(efx, probe, efx->net_dev,
+ "NIC has other than default VI_STRIDES (mask "
+ "%#llx), early probing might use wrong one\n",
+ reader->value);
+ return 0;
+ case ESE_EF100_DP_GZ_RX_MAX_RUNT:
+ /* Driver doesn't look at L2_STATUS:LEN_ERR bit, so we don't
+ * care whether it indicates runt or overlength for any given
+ * packet, so we don't care about this parameter.
+ */
+ return 0;
+ default:
+ /* Host interface says "Drivers should ignore design parameters
+ * that they do not recognise."
+ */
+ netif_dbg(efx, probe, efx->net_dev,
+ "Ignoring unrecognised design parameter %u\n",
+ reader->type);
+ return 0;
+ }
+}
+
+static int ef100_check_design_params(struct efx_nic *efx)
+{
+ struct ef100_tlv_state reader = {};
+ u32 total_len, offset = 0;
+ efx_dword_t reg;
+ int rc = 0, i;
+ u32 data;
+
+ efx_readd(efx, ®, ER_GZ_PARAMS_TLV_LEN);
+ total_len = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
+ netif_dbg(efx, probe, efx->net_dev, "%u bytes of design parameters\n",
+ total_len);
+ while (offset < total_len) {
+ efx_readd(efx, ®, ER_GZ_PARAMS_TLV + offset);
+ data = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
+ for (i = 0; i < sizeof(data); i++) {
+ rc = ef100_tlv_feed(&reader, data);
+ /* Got a complete value? */
+ if (!rc && reader.state == EF100_TLV_TYPE)
+ rc = ef100_process_design_param(efx, &reader);
+ if (rc)
+ goto out;
+ data >>= 8;
+ offset++;
+ }
+ }
+ /* Check we didn't end halfway through a TLV entry, which could either
+ * mean that the TLV stream is truncated or just that it's corrupted
+ * and our state machine is out of sync.
+ */
+ if (reader.state != EF100_TLV_TYPE) {
+ if (reader.state == EF100_TLV_TYPE_CONT)
+ netif_err(efx, probe, efx->net_dev,
+ "truncated design parameter (incomplete type %u)\n",
+ reader.type);
+ else
+ netif_err(efx, probe, efx->net_dev,
+ "truncated design parameter %u\n",
+ reader.type);
+ rc = -EIO;
+ }
+out:
+ return rc;
+}
+
/* NIC probe and remove
*/
static int ef100_probe_main(struct efx_nic *efx)
@@ -536,6 +738,20 @@ static int ef100_probe_main(struct efx_nic *efx)
net_dev->features |= efx->type->offload_features;
net_dev->hw_features |= efx->type->offload_features;
+ /* Populate design-parameter defaults */
+ nic_data->tso_max_hdr_len = ESE_EF100_DP_GZ_TSO_MAX_HDR_LEN_DEFAULT;
+ nic_data->tso_max_frames = ESE_EF100_DP_GZ_TSO_MAX_NUM_FRAMES_DEFAULT;
+ nic_data->tso_max_payload_num_segs = ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_NUM_SEGS_DEFAULT;
+ nic_data->tso_max_payload_len = ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_LEN_DEFAULT;
+ net_dev->gso_max_segs = ESE_EF100_DP_GZ_TSO_MAX_HDR_NUM_SEGS_DEFAULT;
+ /* Read design parameters */
+ rc = ef100_check_design_params(efx);
+ if (rc) {
+ netif_err(efx, probe, efx->net_dev,
+ "Unsupported design parameters\n");
+ goto fail;
+ }
+
/* we assume later that we can copy from this buffer in dwords */
BUILD_BUG_ON(MCDI_CTL_SDU_LEN_MAX_V2 % 4);
@@ -26,6 +26,10 @@ struct ef100_nic_data {
u16 warm_boot_count;
u8 port_id[ETH_ALEN];
DECLARE_BITMAP(evq_phases, EFX_MAX_CHANNELS);
+ u16 tso_max_hdr_len;
+ u16 tso_max_payload_num_segs;
+ u16 tso_max_frames;
+ unsigned int tso_max_payload_len;
};
#define efx_ef100_has_cap(caps, flag) \
Several parts of the EF100 architecture are parameterised (to allow varying capabilities on FPGAs according to resource constraints), and these parameters are exposed to the driver through a TLV-encoded region of the BAR. For the most part we either don't care about these values at all or just need to sanity-check them against the driver's assumptions, but there are a number of TSO limits which we record so that we will be able to check against them in the TX path when handling GSO skbs. Signed-off-by: Edward Cree <ecree@solarflare.com> --- drivers/net/ethernet/sfc/ef100_nic.c | 216 +++++++++++++++++++++++++++ drivers/net/ethernet/sfc/ef100_nic.h | 4 + 2 files changed, 220 insertions(+)