@@ -529,10 +529,6 @@ static void u300_gpio_irq_enable(struct irq_data *d)
dev_dbg(gpio->dev, "enable IRQ for hwirq %lu on port %s, offset %d\n",
d->hwirq, port->name, offset);
- if (gpio_lock_as_irq(&gpio->chip, d->hwirq))
- dev_err(gpio->dev,
- "unable to lock HW IRQ %lu for IRQ\n",
- d->hwirq);
local_irq_save(flags);
val = readl(U300_PIN_REG(offset, ien));
writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
@@ -551,6 +547,27 @@ static void u300_gpio_irq_disable(struct irq_data *d)
val = readl(U300_PIN_REG(offset, ien));
writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
+}
+
+static int u300_gpio_irq_reqres(struct irq_data *d)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+
+ if (gpio_lock_as_irq(&gpio->chip, d->hwirq)) {
+ dev_err(gpio->dev,
+ "unable to lock HW IRQ %lu for IRQ\n",
+ d->hwirq);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void u300_gpio_irq_relres(struct irq_data *d)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+
gpio_unlock_as_irq(&gpio->chip, d->hwirq);
}
@@ -559,7 +576,8 @@ static struct irq_chip u300_gpio_irqchip = {
.irq_enable = u300_gpio_irq_enable,
.irq_disable = u300_gpio_irq_disable,
.irq_set_type = u300_gpio_irq_type,
-
+ .irq_request_resources = u300_gpio_irq_reqres,
+ .irq_release_resources = u300_gpio_irq_relres,
};
static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
This switches the COH901 GPIO driver over to using the .request_resources() and .release_resources() callbacks from the irqchip vtable and separate the calls from the .enable() and .disable() callbacks as the latter cannot really say no to a request, whereas the resource callbacks can. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/pinctrl/pinctrl-coh901.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-)