[5.8,130/232] sched/uclamp: Protect uclamp fast path code with static key

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index c3cbdc436e2e4..db1e99756c400 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -794,6 +794,26 @@  unsigned int sysctl_sched_uclamp_util_max = SCHED_CAPACITY_SCALE;
 /* All clamps are required to be less or equal than these values */
 static struct uclamp_se uclamp_default[UCLAMP_CNT];
 
+/*
+ * This static key is used to reduce the uclamp overhead in the fast path. It
+ * primarily disables the call to uclamp_rq_{inc, dec}() in
+ * enqueue/dequeue_task().
+ *
+ * This allows users to continue to enable uclamp in their kernel config with
+ * minimum uclamp overhead in the fast path.
+ *
+ * As soon as userspace modifies any of the uclamp knobs, the static key is
+ * enabled, since we have an actual users that make use of uclamp
+ * functionality.
+ *
+ * The knobs that would enable this static key are:
+ *
+ *   * A task modifying its uclamp value with sched_setattr().
+ *   * An admin modifying the sysctl_sched_uclamp_{min, max} via procfs.
+ *   * An admin modifying the cgroup cpu.uclamp.{min, max}
+ */
+DEFINE_STATIC_KEY_FALSE(sched_uclamp_used);
+
 /* Integer rounded range for each bucket */
 #define UCLAMP_BUCKET_DELTA DIV_ROUND_CLOSEST(SCHED_CAPACITY_SCALE, UCLAMP_BUCKETS)
 
@@ -990,10 +1010,38 @@  static inline void uclamp_rq_dec_id(struct rq *rq, struct task_struct *p,
 
 	lockdep_assert_held(&rq->lock);
 
+	/*
+	 * If sched_uclamp_used was enabled after task @p was enqueued,
+	 * we could end up with unbalanced call to uclamp_rq_dec_id().
+	 *
+	 * In this case the uc_se->active flag should be false since no uclamp
+	 * accounting was performed at enqueue time and we can just return
+	 * here.
+	 *
+	 * Need to be careful of the following enqeueue/dequeue ordering
+	 * problem too
+	 *
+	 *	enqueue(taskA)
+	 *	// sched_uclamp_used gets enabled
+	 *	enqueue(taskB)
+	 *	dequeue(taskA)
+	 *	// Must not decrement bukcet->tasks here
+	 *	dequeue(taskB)
+	 *
+	 * where we could end up with stale data in uc_se and
+	 * bucket[uc_se->bucket_id].
+	 *
+	 * The following check here eliminates the possibility of such race.
+	 */
+	if (unlikely(!uc_se->active))
+		return;
+
 	bucket = &uc_rq->bucket[uc_se->bucket_id];
+
 	SCHED_WARN_ON(!bucket->tasks);
 	if (likely(bucket->tasks))
 		bucket->tasks--;
+
 	uc_se->active = false;
 
 	/*
@@ -1021,6 +1069,15 @@  static inline void uclamp_rq_inc(struct rq *rq, struct task_struct *p)
 {
 	enum uclamp_id clamp_id;
 
+	/*
+	 * Avoid any overhead until uclamp is actually used by the userspace.
+	 *
+	 * The condition is constructed such that a NOP is generated when
+	 * sched_uclamp_used is disabled.
+	 */
+	if (!static_branch_unlikely(&sched_uclamp_used))
+		return;
+
 	if (unlikely(!p->sched_class->uclamp_enabled))
 		return;
 
@@ -1036,6 +1093,15 @@  static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p)
 {
 	enum uclamp_id clamp_id;
 
+	/*
+	 * Avoid any overhead until uclamp is actually used by the userspace.
+	 *
+	 * The condition is constructed such that a NOP is generated when
+	 * sched_uclamp_used is disabled.
+	 */
+	if (!static_branch_unlikely(&sched_uclamp_used))
+		return;
+
 	if (unlikely(!p->sched_class->uclamp_enabled))
 		return;
 
@@ -1144,8 +1210,10 @@  int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
 		update_root_tg = true;
 	}
 
-	if (update_root_tg)
+	if (update_root_tg) {
+		static_branch_enable(&sched_uclamp_used);
 		uclamp_update_root_tg();
+	}
 
 	/*
 	 * We update all RUNNABLE tasks only when task groups are in use.
@@ -1210,6 +1278,8 @@  static void __setscheduler_uclamp(struct task_struct *p,
 	if (likely(!(attr->sched_flags & SCHED_FLAG_UTIL_CLAMP)))
 		return;
 
+	static_branch_enable(&sched_uclamp_used);
+
 	if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MIN) {
 		uclamp_se_set(&p->uclamp_req[UCLAMP_MIN],
 			      attr->sched_util_min, true);
@@ -7442,6 +7512,8 @@  static ssize_t cpu_uclamp_write(struct kernfs_open_file *of, char *buf,
 	if (req.ret)
 		return req.ret;
 
+	static_branch_enable(&sched_uclamp_used);
+
 	mutex_lock(&uclamp_mutex);
 	rcu_read_lock();
 
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 7fbaee24c824f..dc6835bc64907 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -210,7 +210,7 @@  unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
 	unsigned long dl_util, util, irq;
 	struct rq *rq = cpu_rq(cpu);
 
-	if (!IS_BUILTIN(CONFIG_UCLAMP_TASK) &&
+	if (!uclamp_is_used() &&
 	    type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) {
 		return max;
 	}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 877fb08eb1b04..c82857e2e288a 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -862,6 +862,8 @@  struct uclamp_rq {
 	unsigned int value;
 	struct uclamp_bucket bucket[UCLAMP_BUCKETS];
 };
+
+DECLARE_STATIC_KEY_FALSE(sched_uclamp_used);
 #endif /* CONFIG_UCLAMP_TASK */
 
 /*
@@ -2349,12 +2351,35 @@  static inline void cpufreq_update_util(struct rq *rq, unsigned int flags) {}
 #ifdef CONFIG_UCLAMP_TASK
 unsigned long uclamp_eff_value(struct task_struct *p, enum uclamp_id clamp_id);
 
+/**
+ * uclamp_rq_util_with - clamp @util with @rq and @p effective uclamp values.
+ * @rq:		The rq to clamp against. Must not be NULL.
+ * @util:	The util value to clamp.
+ * @p:		The task to clamp against. Can be NULL if you want to clamp
+ *		against @rq only.
+ *
+ * Clamps the passed @util to the max(@rq, @p) effective uclamp values.
+ *
+ * If sched_uclamp_used static key is disabled, then just return the util
+ * without any clamping since uclamp aggregation at the rq level in the fast
+ * path is disabled, rendering this operation a NOP.
+ *
+ * Use uclamp_eff_value() if you don't care about uclamp values at rq level. It
+ * will return the correct effective uclamp value of the task even if the
+ * static key is disabled.
+ */
 static __always_inline
 unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util,
 				  struct task_struct *p)
 {
-	unsigned long min_util = READ_ONCE(rq->uclamp[UCLAMP_MIN].value);
-	unsigned long max_util = READ_ONCE(rq->uclamp[UCLAMP_MAX].value);
+	unsigned long min_util;
+	unsigned long max_util;
+
+	if (!static_branch_likely(&sched_uclamp_used))
+		return util;
+
+	min_util = READ_ONCE(rq->uclamp[UCLAMP_MIN].value);
+	max_util = READ_ONCE(rq->uclamp[UCLAMP_MAX].value);
 
 	if (p) {
 		min_util = max(min_util, uclamp_eff_value(p, UCLAMP_MIN));
@@ -2371,6 +2396,19 @@  unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util,
 
 	return clamp(util, min_util, max_util);
 }
+
+/*
+ * When uclamp is compiled in, the aggregation at rq level is 'turned off'
+ * by default in the fast path and only gets turned on once userspace performs
+ * an operation that requires it.
+ *
+ * Returns true if userspace opted-in to use uclamp and aggregation at rq level
+ * hence is active.
+ */
+static inline bool uclamp_is_used(void)
+{
+	return static_branch_likely(&sched_uclamp_used);
+}
 #else /* CONFIG_UCLAMP_TASK */
 static inline
 unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util,
@@ -2378,6 +2416,11 @@  unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util,
 {
 	return util;
 }
+
+static inline bool uclamp_is_used(void)
+{
+	return false;
+}
 #endif /* CONFIG_UCLAMP_TASK */
 
 #ifdef arch_scale_freq_capacity