diff mbox series

[v2,RESEND,7/9] spi: spi-s3c64xx: Ensure cur_speed holds actual clock value

Message ID 20201001152148.29747-8-l.stelmach@samsung.com
State Superseded
Headers show
Series Some fixes for spi-s3c64xx | expand

Commit Message

Lukasz Stelmach Oct. 1, 2020, 3:21 p.m. UTC
Make sure the cur_speed value used in s3c64xx_enable_datapath()
to configure DMA channel and in s3c64xx_wait_for_*() to calculate the
transfer timeout is set to the actual value of (half) the clock speed.

Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
---
 drivers/spi/spi-s3c64xx.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Krzysztof Kozlowski Oct. 1, 2020, 7:12 p.m. UTC | #1
On Thu, Oct 01, 2020 at 05:21:46PM +0200, Łukasz Stelmach wrote:
> Make sure the cur_speed value used in s3c64xx_enable_datapath()
> to configure DMA channel and in s3c64xx_wait_for_*() to calculate the
> transfer timeout is set to the actual value of (half) the clock speed.
> 
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
> ---
>  drivers/spi/spi-s3c64xx.c | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 02de734b8ab1..89c162efe355 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -626,6 +626,7 @@  static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 		ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
 		if (ret)
 			return ret;
+		sdd->cur_speed = clk_get_rate(sdd->src_clk) / 2;
 	} else {
 		/* Configure Clock */
 		val = readl(regs + S3C64XX_SPI_CLK_CFG);