@@ -38,8 +38,8 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
cd-gpios = <&gpio7 6 0x4>; // 230
@@ -63,7 +63,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
@@ -117,8 +117,8 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
signal-direction = <(MCI_ST_DATA2DIREN |
MCI_ST_CMDDIREN |
MCI_ST_DATA0DIREN |
@@ -149,7 +149,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi2_default_mode>;
pinctrl-1 = <&sdi2_sleep_mode>;
@@ -162,7 +162,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi4_default_mode>;
@@ -156,7 +156,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
@@ -195,7 +195,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi4_default_mode>;
The mmci host driver supports the common mmc DT parser, which enables us to use the use common names instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- arch/arm/boot/dts/ste-ccu9540.dts | 6 +++--- arch/arm/boot/dts/ste-href.dtsi | 8 ++++---- arch/arm/boot/dts/ste-snowball.dts | 4 ++-- 3 files changed, 9 insertions(+), 9 deletions(-)