@@ -2847,7 +2847,7 @@ static int __maybe_unused ccs_resume(struct device *dev)
static int ccs_get_hwconfig(struct ccs_sensor *sensor, struct device *dev)
{
struct ccs_hwconfig *hwcfg = &sensor->hwcfg;
- struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
+ struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_UNKNOWN };
struct fwnode_handle *ep;
struct fwnode_handle *fwnode = dev_fwnode(dev);
u32 rotation;
@@ -2858,13 +2858,11 @@ static int ccs_get_hwconfig(struct ccs_sensor *sensor, struct device *dev)
if (!ep)
return -ENODEV;
- bus_cfg.bus_type = V4L2_MBUS_CSI2_DPHY;
+ /*
+ * Note that we do need to rely on detecting the bus type between CSI-2
+ * D-PHY and CCP2 as the old bindings did not require it.
+ */
rval = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
- if (rval == -ENXIO) {
- bus_cfg = (struct v4l2_fwnode_endpoint)
- { .bus_type = V4L2_MBUS_CCP2 };
- rval = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
- }
if (rval)
goto out_err;
@@ -2873,6 +2871,7 @@ static int ccs_get_hwconfig(struct ccs_sensor *sensor, struct device *dev)
hwcfg->csi_signalling_mode = CCS_CSI_SIGNALING_MODE_CSI_2_DPHY;
hwcfg->lanes = bus_cfg.bus.mipi_csi2.num_data_lanes;
break;
+ case V4L2_MBUS_CSI1:
case V4L2_MBUS_CCP2:
hwcfg->csi_signalling_mode = (bus_cfg.bus.mipi_csi1.strobe) ?
SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE :
Let v4l2_fwnode_endpoint_alloc_parse to figure out the type of the data bus. As the old bindings did not require the "bus-type" property, we need to rely on guessing between CSI-2 D-PHY and CCP2. Setting the type to CSI-2 D-PHY will parse just that and succeed even if no data-lanes are set. Also add a comment on the matter to the driver to avoid breaking this in the future. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- drivers/media/i2c/ccs/ccs-core.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)