diff mbox series

[2/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver

Message ID 20201011024831.3868571-3-daniel@0x0f.com
State New
Headers show
Series Add GPIO support for MStar/SigmaStar ARMv7 | expand

Commit Message

Daniel Palmer Oct. 11, 2020, 2:48 a.m. UTC
The driver uses the pin names to find the right interrupt for
a pin from the device tree so this header reduces the need to
have multiple copies of the same string all over the place.

This header also adds defines for the gpio number of each pin
from the driver view. The gpio block seems to support 128 lines
but what line is mapped to a physical pin depends on the chip.
The driver itself uses the index of a pin's offset in an array
of the possible offsets for a chip as the gpio number.

The defines remove the need to work out that index to consume
a pin in the device tree.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
---
 MAINTAINERS                            |  1 +
 include/dt-bindings/gpio/msc313-gpio.h | 95 ++++++++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 include/dt-bindings/gpio/msc313-gpio.h

Comments

Rob Herring Oct. 12, 2020, 4:11 p.m. UTC | #1
On Sun, Oct 11, 2020 at 11:48:28AM +0900, Daniel Palmer wrote:
> The driver uses the pin names to find the right interrupt for
> a pin from the device tree so this header reduces the need to
> have multiple copies of the same string all over the place.
> 
> This header also adds defines for the gpio number of each pin
> from the driver view. The gpio block seems to support 128 lines
> but what line is mapped to a physical pin depends on the chip.
> The driver itself uses the index of a pin's offset in an array
> of the possible offsets for a chip as the gpio number.
> 
> The defines remove the need to work out that index to consume
> a pin in the device tree.
> 
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
>  MAINTAINERS                            |  1 +
>  include/dt-bindings/gpio/msc313-gpio.h | 95 ++++++++++++++++++++++++++
>  2 files changed, 96 insertions(+)
>  create mode 100644 include/dt-bindings/gpio/msc313-gpio.h

This should be part of the previous patch to avoid the error.

> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4594b70f2e3a..ec5b49b9955f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2158,6 +2158,7 @@ F:	Documentation/devicetree/bindings/arm/mstar/*
>  F:	Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
>  F:	arch/arm/boot/dts/mstar-*
>  F:	arch/arm/mach-mstar/
> +F:	include/dt-bindings/gpio/msc313-gpio.h
>  
>  ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
>  M:	Michael Petchkovsky <mkpetch@internode.on.net>
> diff --git a/include/dt-bindings/gpio/msc313-gpio.h b/include/dt-bindings/gpio/msc313-gpio.h
> new file mode 100644
> index 000000000000..655fe03de519
> --- /dev/null
> +++ b/include/dt-bindings/gpio/msc313-gpio.h
> @@ -0,0 +1,95 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */

Don't use DT on non-GPL systems?

> +/*
> + * GPIO definitions for MStar/SigmaStar MSC313 and later SoCs
> + *
> + * Copyright (C) 2020 Daniel Palmer <daniel@thingy.jp>
> + */
> +
> +#ifndef _DT_BINDINGS_MSC313_GPIO_H
> +#define _DT_BINDINGS_MSC313_GPIO_H
> +
> +/* pin names for fuart, same for all SoCs so far */
> +#define MSC313_PINNAME_FUART_RX		"fuart_rx"
> +#define MSC313_PINNAME_FUART_TX		"fuart_tx"
> +#define MSC313_PINNAME_FUART_CTS	"fuart_cts"
> +#define MSC313_PINNAME_FUART_RTS	"fuart_rts"
> +
> +/* pin names for sr, mercury5 is different */
> +#define MSC313_PINNAME_SR_IO2		"sr_io2"
> +#define MSC313_PINNAME_SR_IO3		"sr_io3"
> +#define MSC313_PINNAME_SR_IO4		"sr_io4"
> +#define MSC313_PINNAME_SR_IO5		"sr_io5"
> +#define MSC313_PINNAME_SR_IO6		"sr_io6"
> +#define MSC313_PINNAME_SR_IO7		"sr_io7"
> +#define MSC313_PINNAME_SR_IO8		"sr_io8"
> +#define MSC313_PINNAME_SR_IO9		"sr_io9"
> +#define MSC313_PINNAME_SR_IO10		"sr_io10"
> +#define MSC313_PINNAME_SR_IO11		"sr_io11"
> +#define MSC313_PINNAME_SR_IO12		"sr_io12"
> +#define MSC313_PINNAME_SR_IO13		"sr_io13"
> +#define MSC313_PINNAME_SR_IO14		"sr_io14"
> +#define MSC313_PINNAME_SR_IO15		"sr_io15"
> +#define MSC313_PINNAME_SR_IO16		"sr_io16"
> +#define MSC313_PINNAME_SR_IO17		"sr_io17"
> +
> +/* pin names for sd, same for all SoCs so far */
> +#define MSC313_PINNAME_SD_CLK		"sd_clk"
> +#define MSC313_PINNAME_SD_CMD		"sd_cmd"
> +#define MSC313_PINNAME_SD_D0		"sd_d0"
> +#define MSC313_PINNAME_SD_D1		"sd_d1"
> +#define MSC313_PINNAME_SD_D2		"sd_d2"
> +#define MSC313_PINNAME_SD_D3		"sd_d3"
> +
> +/* pin names for i2c1, same for all SoCs so for */
> +#define MSC313_PINNAME_I2C1_SCL		"i2c1_scl"
> +#define MSC313_PINNAME_I2C1_SCA		"i2c1_sda"
> +
> +/* pin names for spi0, same for all SoCs so far */
> +#define MSC313_PINNAME_SPI0_CZ		"spi0_cz"
> +#define MSC313_PINNAME_SPI0_CK		"spi0_ck"
> +#define MSC313_PINNAME_SPI0_DI		"spi0_di"
> +#define MSC313_PINNAME_SPI0_DO		"spi0_do"
> +
> +#define MSC313_GPIO_FUART	0
> +#define MSC313_GPIO_FUART_RX	(MSC313_GPIO_FUART + 0)
> +#define MSC313_GPIO_FUART_TX	(MSC313_GPIO_FUART + 1)
> +#define MSC313_GPIO_FUART_CTS	(MSC313_GPIO_FUART + 2)
> +#define MSC313_GPIO_FUART_RTS	(MSC313_GPIO_FUART + 3)
> +
> +#define MSC313_GPIO_SR		(MSC313_GPIO_FUART_RTS + 1)
> +#define MSC313_GPIO_SR_IO2	(MSC313_GPIO_SR + 0)
> +#define MSC313_GPIO_SR_IO3	(MSC313_GPIO_SR + 1)
> +#define MSC313_GPIO_SR_IO4	(MSC313_GPIO_SR + 2)
> +#define MSC313_GPIO_SR_IO5	(MSC313_GPIO_SR + 3)
> +#define MSC313_GPIO_SR_IO6	(MSC313_GPIO_SR + 4)
> +#define MSC313_GPIO_SR_IO7	(MSC313_GPIO_SR + 5)
> +#define MSC313_GPIO_SR_IO8	(MSC313_GPIO_SR + 6)
> +#define MSC313_GPIO_SR_IO9	(MSC313_GPIO_SR + 7)
> +#define MSC313_GPIO_SR_IO10	(MSC313_GPIO_SR + 8)
> +#define MSC313_GPIO_SR_IO11	(MSC313_GPIO_SR + 9)
> +#define MSC313_GPIO_SR_IO12	(MSC313_GPIO_SR + 10)
> +#define MSC313_GPIO_SR_IO13	(MSC313_GPIO_SR + 11)
> +#define MSC313_GPIO_SR_IO14	(MSC313_GPIO_SR + 12)
> +#define MSC313_GPIO_SR_IO15	(MSC313_GPIO_SR + 13)
> +#define MSC313_GPIO_SR_IO16	(MSC313_GPIO_SR + 14)
> +#define MSC313_GPIO_SR_IO17	(MSC313_GPIO_SR + 15)
> +
> +#define MSC313_GPIO_SD		(MSC313_GPIO_SR_IO17 + 1)
> +#define MSC313_GPIO_SD_CLK	(MSC313_GPIO_SD + 0)
> +#define MSC313_GPIO_SD_CMD	(MSC313_GPIO_SD + 1)
> +#define MSC313_GPIO_SD_D0	(MSC313_GPIO_SD + 2)
> +#define MSC313_GPIO_SD_D1	(MSC313_GPIO_SD + 3)
> +#define MSC313_GPIO_SD_D2	(MSC313_GPIO_SD + 4)
> +#define MSC313_GPIO_SD_D3	(MSC313_GPIO_SD + 5)
> +
> +#define MSC313_GPIO_I2C1	(MSC313_GPIO_SD_D3 + 1)
> +#define MSC313_GPIO_I2C1_SCL	(MSC313_GPIO_I2C1 + 0)
> +#define MSC313_GPIO_I2C1_SDA	(MSC313_GPIO_I2C1 + 1)
> +
> +#define MSC313_GPIO_SPI0	(MSC313_GPIO_I2C1_SDA + 1)
> +#define MSC313_GPIO_SPI0_CZ	(MSC313_GPIO_SPI0 + 0)
> +#define MSC313_GPIO_SPI0_CK	(MSC313_GPIO_SPI0 + 1)
> +#define MSC313_GPIO_SPI0_DI	(MSC313_GPIO_SPI0 + 2)
> +#define MSC313_GPIO_SPI0_DO	(MSC313_GPIO_SPI0 + 3)
> +
> +#endif /* _DT_BINDINGS_MSC313_GPIO_H */
> -- 
> 2.27.0
>
Daniel Palmer Oct. 14, 2020, 9:45 a.m. UTC | #2
Hi Rob,

On Tue, 13 Oct 2020 at 01:11, Rob Herring <robh@kernel.org> wrote:
<snip>
> >  MAINTAINERS                            |  1 +
> >  include/dt-bindings/gpio/msc313-gpio.h | 95 ++++++++++++++++++++++++++
> >  2 files changed, 96 insertions(+)
> >  create mode 100644 include/dt-bindings/gpio/msc313-gpio.h
>
> This should be part of the previous patch to avoid the error.

Would reordering the patches to make this header before the yaml file
be acceptable?
The commit message might be pretty big with them squashed into one.

<snip>
> > @@ -0,0 +1,95 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
>
> Don't use DT on non-GPL systems?

Good point. I didn't really think about the header also being used for
something like FreeBSD.
I'll fix that.

Cheers,

Daniel
Rob Herring Oct. 14, 2020, 12:17 p.m. UTC | #3
On Wed, Oct 14, 2020 at 4:46 AM Daniel Palmer <daniel@0x0f.com> wrote:
>
> Hi Rob,
>
> On Tue, 13 Oct 2020 at 01:11, Rob Herring <robh@kernel.org> wrote:
> <snip>
> > >  MAINTAINERS                            |  1 +
> > >  include/dt-bindings/gpio/msc313-gpio.h | 95 ++++++++++++++++++++++++++
> > >  2 files changed, 96 insertions(+)
> > >  create mode 100644 include/dt-bindings/gpio/msc313-gpio.h
> >
> > This should be part of the previous patch to avoid the error.
>
> Would reordering the patches to make this header before the yaml file
> be acceptable?

Sure.
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 4594b70f2e3a..ec5b49b9955f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2158,6 +2158,7 @@  F:	Documentation/devicetree/bindings/arm/mstar/*
 F:	Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
 F:	arch/arm/boot/dts/mstar-*
 F:	arch/arm/mach-mstar/
+F:	include/dt-bindings/gpio/msc313-gpio.h
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 M:	Michael Petchkovsky <mkpetch@internode.on.net>
diff --git a/include/dt-bindings/gpio/msc313-gpio.h b/include/dt-bindings/gpio/msc313-gpio.h
new file mode 100644
index 000000000000..655fe03de519
--- /dev/null
+++ b/include/dt-bindings/gpio/msc313-gpio.h
@@ -0,0 +1,95 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * GPIO definitions for MStar/SigmaStar MSC313 and later SoCs
+ *
+ * Copyright (C) 2020 Daniel Palmer <daniel@thingy.jp>
+ */
+
+#ifndef _DT_BINDINGS_MSC313_GPIO_H
+#define _DT_BINDINGS_MSC313_GPIO_H
+
+/* pin names for fuart, same for all SoCs so far */
+#define MSC313_PINNAME_FUART_RX		"fuart_rx"
+#define MSC313_PINNAME_FUART_TX		"fuart_tx"
+#define MSC313_PINNAME_FUART_CTS	"fuart_cts"
+#define MSC313_PINNAME_FUART_RTS	"fuart_rts"
+
+/* pin names for sr, mercury5 is different */
+#define MSC313_PINNAME_SR_IO2		"sr_io2"
+#define MSC313_PINNAME_SR_IO3		"sr_io3"
+#define MSC313_PINNAME_SR_IO4		"sr_io4"
+#define MSC313_PINNAME_SR_IO5		"sr_io5"
+#define MSC313_PINNAME_SR_IO6		"sr_io6"
+#define MSC313_PINNAME_SR_IO7		"sr_io7"
+#define MSC313_PINNAME_SR_IO8		"sr_io8"
+#define MSC313_PINNAME_SR_IO9		"sr_io9"
+#define MSC313_PINNAME_SR_IO10		"sr_io10"
+#define MSC313_PINNAME_SR_IO11		"sr_io11"
+#define MSC313_PINNAME_SR_IO12		"sr_io12"
+#define MSC313_PINNAME_SR_IO13		"sr_io13"
+#define MSC313_PINNAME_SR_IO14		"sr_io14"
+#define MSC313_PINNAME_SR_IO15		"sr_io15"
+#define MSC313_PINNAME_SR_IO16		"sr_io16"
+#define MSC313_PINNAME_SR_IO17		"sr_io17"
+
+/* pin names for sd, same for all SoCs so far */
+#define MSC313_PINNAME_SD_CLK		"sd_clk"
+#define MSC313_PINNAME_SD_CMD		"sd_cmd"
+#define MSC313_PINNAME_SD_D0		"sd_d0"
+#define MSC313_PINNAME_SD_D1		"sd_d1"
+#define MSC313_PINNAME_SD_D2		"sd_d2"
+#define MSC313_PINNAME_SD_D3		"sd_d3"
+
+/* pin names for i2c1, same for all SoCs so for */
+#define MSC313_PINNAME_I2C1_SCL		"i2c1_scl"
+#define MSC313_PINNAME_I2C1_SCA		"i2c1_sda"
+
+/* pin names for spi0, same for all SoCs so far */
+#define MSC313_PINNAME_SPI0_CZ		"spi0_cz"
+#define MSC313_PINNAME_SPI0_CK		"spi0_ck"
+#define MSC313_PINNAME_SPI0_DI		"spi0_di"
+#define MSC313_PINNAME_SPI0_DO		"spi0_do"
+
+#define MSC313_GPIO_FUART	0
+#define MSC313_GPIO_FUART_RX	(MSC313_GPIO_FUART + 0)
+#define MSC313_GPIO_FUART_TX	(MSC313_GPIO_FUART + 1)
+#define MSC313_GPIO_FUART_CTS	(MSC313_GPIO_FUART + 2)
+#define MSC313_GPIO_FUART_RTS	(MSC313_GPIO_FUART + 3)
+
+#define MSC313_GPIO_SR		(MSC313_GPIO_FUART_RTS + 1)
+#define MSC313_GPIO_SR_IO2	(MSC313_GPIO_SR + 0)
+#define MSC313_GPIO_SR_IO3	(MSC313_GPIO_SR + 1)
+#define MSC313_GPIO_SR_IO4	(MSC313_GPIO_SR + 2)
+#define MSC313_GPIO_SR_IO5	(MSC313_GPIO_SR + 3)
+#define MSC313_GPIO_SR_IO6	(MSC313_GPIO_SR + 4)
+#define MSC313_GPIO_SR_IO7	(MSC313_GPIO_SR + 5)
+#define MSC313_GPIO_SR_IO8	(MSC313_GPIO_SR + 6)
+#define MSC313_GPIO_SR_IO9	(MSC313_GPIO_SR + 7)
+#define MSC313_GPIO_SR_IO10	(MSC313_GPIO_SR + 8)
+#define MSC313_GPIO_SR_IO11	(MSC313_GPIO_SR + 9)
+#define MSC313_GPIO_SR_IO12	(MSC313_GPIO_SR + 10)
+#define MSC313_GPIO_SR_IO13	(MSC313_GPIO_SR + 11)
+#define MSC313_GPIO_SR_IO14	(MSC313_GPIO_SR + 12)
+#define MSC313_GPIO_SR_IO15	(MSC313_GPIO_SR + 13)
+#define MSC313_GPIO_SR_IO16	(MSC313_GPIO_SR + 14)
+#define MSC313_GPIO_SR_IO17	(MSC313_GPIO_SR + 15)
+
+#define MSC313_GPIO_SD		(MSC313_GPIO_SR_IO17 + 1)
+#define MSC313_GPIO_SD_CLK	(MSC313_GPIO_SD + 0)
+#define MSC313_GPIO_SD_CMD	(MSC313_GPIO_SD + 1)
+#define MSC313_GPIO_SD_D0	(MSC313_GPIO_SD + 2)
+#define MSC313_GPIO_SD_D1	(MSC313_GPIO_SD + 3)
+#define MSC313_GPIO_SD_D2	(MSC313_GPIO_SD + 4)
+#define MSC313_GPIO_SD_D3	(MSC313_GPIO_SD + 5)
+
+#define MSC313_GPIO_I2C1	(MSC313_GPIO_SD_D3 + 1)
+#define MSC313_GPIO_I2C1_SCL	(MSC313_GPIO_I2C1 + 0)
+#define MSC313_GPIO_I2C1_SDA	(MSC313_GPIO_I2C1 + 1)
+
+#define MSC313_GPIO_SPI0	(MSC313_GPIO_I2C1_SDA + 1)
+#define MSC313_GPIO_SPI0_CZ	(MSC313_GPIO_SPI0 + 0)
+#define MSC313_GPIO_SPI0_CK	(MSC313_GPIO_SPI0 + 1)
+#define MSC313_GPIO_SPI0_DI	(MSC313_GPIO_SPI0 + 2)
+#define MSC313_GPIO_SPI0_DO	(MSC313_GPIO_SPI0 + 3)
+
+#endif /* _DT_BINDINGS_MSC313_GPIO_H */