@@ -218,7 +218,7 @@ static void find_boot_device(void)
IPL_assert(found, "Boot device not found\n");
}
-static void virtio_setup(void)
+static int virtio_setup(void)
{
VDev *vdev = virtio_get_device();
QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
@@ -233,9 +233,14 @@ static void virtio_setup(void)
sclp_print("Network boot device detected\n");
vdev->netboot_start_addr = qipl.netboot_start_addr;
} else {
- virtio_blk_setup_device(blk_schid);
+ int ret = virtio_blk_setup_device(blk_schid);
+ if (ret) {
+ return ret;
+ }
IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device detected");
}
+
+ return 0;
}
static void ipl_boot_device(void)
@@ -246,8 +251,9 @@ static void ipl_boot_device(void)
dasd_ipl(blk_schid, cutype); /* no return */
break;
case CU_TYPE_VIRTIO:
- virtio_setup();
- zipl_load(); /* no return */
+ if (virtio_setup() == 0) {
+ zipl_load(); /* no return */
+ }
break;
default:
print_int("Attempting to boot from unexpected device type", cutype);
@@ -69,7 +69,7 @@ int sclp_read(char *str, size_t count);
unsigned long virtio_load_direct(ulong rec_list1, ulong rec_list2,
ulong subchan_id, void *load_addr);
bool virtio_is_supported(SubChannelId schid);
-void virtio_blk_setup_device(SubChannelId schid);
+int virtio_blk_setup_device(SubChannelId schid);
int virtio_read(ulong sector, void *load_addr);
/* bootmap.c */
@@ -263,9 +263,10 @@ uint64_t virtio_get_blocks(void)
return 0;
}
-void virtio_blk_setup_device(SubChannelId schid)
+int virtio_blk_setup_device(SubChannelId schid)
{
VDev *vdev = virtio_get_device();
+ int ret = 0;
vdev->schid = schid;
virtio_setup_ccw(vdev);
@@ -288,9 +289,11 @@ void virtio_blk_setup_device(SubChannelId schid)
"Config: CDB size mismatch");
sclp_print("Using virtio-scsi.\n");
- virtio_scsi_setup(vdev);
+ ret = virtio_scsi_setup(vdev);
break;
default:
panic("\n! No IPL device available !\n");
}
+
+ return ret;
}
@@ -194,7 +194,12 @@ static bool scsi_read_capacity(VDev *vdev,
/* virtio-scsi routines */
-static void virtio_scsi_locate_device(VDev *vdev)
+/*
+ * Tries to locate a SCSI device and and adds the information for the found
+ * device to the vdev->scsi_device structure.
+ * Returns 0 if SCSI device could be located, or a error code < 0 otherwise
+ */
+static int virtio_scsi_locate_device(VDev *vdev)
{
const uint16_t channel = 0; /* again, it's what QEMU does */
uint16_t target;
@@ -220,7 +225,7 @@ static void virtio_scsi_locate_device(VDev *vdev)
IPL_check(sdev->channel == 0, "non-zero channel requested");
IPL_check(sdev->target <= vdev->config.scsi.max_target, "target# high");
IPL_check(sdev->lun <= vdev->config.scsi.max_lun, "LUN# high");
- return;
+ return 0;
}
for (target = 0; target <= vdev->config.scsi.max_target; target++) {
@@ -247,18 +252,20 @@ static void virtio_scsi_locate_device(VDev *vdev)
*/
sdev->lun = r->lun[0].v16[0]; /* it's returned this way */
debug_print_int("Have to use LUN", sdev->lun);
- return; /* we have to use this device */
+ return 0; /* we have to use this device */
}
for (i = 0; i < luns; i++) {
if (r->lun[i].v64) {
/* Look for non-zero LUN - we have where to choose from */
sdev->lun = r->lun[i].v16[0];
debug_print_int("Will use LUN", sdev->lun);
- return; /* we have found a device */
+ return 0; /* we have found a device */
}
}
}
- panic("\n! Cannot locate virtio-scsi device !\n");
+
+ sclp_print("Warning: Could not locate a usable virtio-scsi device\n");
+ return -ENODEV;
}
int virtio_scsi_read_many(VDev *vdev,
@@ -322,17 +329,20 @@ static void scsi_parse_capacity_report(void *data,
}
}
-void virtio_scsi_setup(VDev *vdev)
+int virtio_scsi_setup(VDev *vdev)
{
int retry_test_unit_ready = 3;
uint8_t data[256];
uint32_t data_size = sizeof(data);
ScsiInquiryEvpdPages *evpd = &scsi_inquiry_evpd_pages_response;
ScsiInquiryEvpdBl *evpd_bl = &scsi_inquiry_evpd_bl_response;
- int i;
+ int i, ret;
vdev->scsi_device = &default_scsi_device;
- virtio_scsi_locate_device(vdev);
+ ret = virtio_scsi_locate_device(vdev);
+ if (ret < 0) {
+ return ret;
+ }
/* We have to "ping" the device before it becomes readable */
while (!scsi_test_unit_ready(vdev)) {
@@ -417,4 +427,6 @@ void virtio_scsi_setup(VDev *vdev)
}
scsi_parse_capacity_report(data, &vdev->scsi_last_block,
(uint32_t *) &vdev->scsi_block_size);
+
+ return 0;
}
@@ -67,7 +67,7 @@ static inline bool virtio_scsi_response_ok(const VirtioScsiCmdResp *r)
return r->response == VIRTIO_SCSI_S_OK && r->status == CDB_STATUS_GOOD;
}
-void virtio_scsi_setup(VDev *vdev);
+int virtio_scsi_setup(VDev *vdev);
int virtio_scsi_read_many(VDev *vdev,
ulong sector, void *load_addr, int sec_num);