diff mbox series

[RFC,13/14] hw/char/pl011: add a clock input

Message ID 20200925101731.2159827-14-luc@lmichel.fr
State Superseded
Headers show
Series raspi: add the bcm2835 cprman clock manager | expand

Commit Message

Luc Michel Sept. 25, 2020, 10:17 a.m. UTC
Add a clock input to the PL011 UART so we can compute the current baud
rate and trace it. This is intended for developers who wish to use QEMU
to e.g. debug their firmware or to figure out the baud rate configured
by an unknown/closed source binary.

Signed-off-by: Luc Michel <luc@lmichel.fr>
---
 include/hw/char/pl011.h |  1 +
 hw/char/pl011.c         | 45 +++++++++++++++++++++++++++++++++++++++++
 hw/char/trace-events    |  1 +
 3 files changed, 47 insertions(+)

Comments

Philippe Mathieu-Daudé Sept. 25, 2020, 10:36 a.m. UTC | #1
On 9/25/20 12:17 PM, Luc Michel wrote:
> Add a clock input to the PL011 UART so we can compute the current baud

> rate and trace it. This is intended for developers who wish to use QEMU

> to e.g. debug their firmware or to figure out the baud rate configured

> by an unknown/closed source binary.

> 

> Signed-off-by: Luc Michel <luc@lmichel.fr>


Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>


> ---

>  include/hw/char/pl011.h |  1 +

>  hw/char/pl011.c         | 45 +++++++++++++++++++++++++++++++++++++++++

>  hw/char/trace-events    |  1 +

>  3 files changed, 47 insertions(+)

> 

> diff --git a/include/hw/char/pl011.h b/include/hw/char/pl011.h

> index a91ea50e11..33e5e5317b 100644

> --- a/include/hw/char/pl011.h

> +++ b/include/hw/char/pl011.h

> @@ -47,10 +47,11 @@ struct PL011State {

>      int read_pos;

>      int read_count;

>      int read_trigger;

>      CharBackend chr;

>      qemu_irq irq[6];

> +    Clock *clk;

>      const unsigned char *id;

>  };

>  

>  static inline DeviceState *pl011_create(hwaddr addr,

>                                          qemu_irq irq,

> diff --git a/hw/char/pl011.c b/hw/char/pl011.c

> index 13e784f9d9..ede16c781c 100644

> --- a/hw/char/pl011.c

> +++ b/hw/char/pl011.c

> @@ -20,10 +20,11 @@

>  

>  #include "qemu/osdep.h"

>  #include "hw/char/pl011.h"

>  #include "hw/irq.h"

>  #include "hw/sysbus.h"

> +#include "hw/qdev-clock.h"

>  #include "migration/vmstate.h"

>  #include "chardev/char-fe.h"

>  #include "qemu/log.h"

>  #include "qemu/module.h"

>  #include "trace.h"

> @@ -167,10 +168,29 @@ static void pl011_set_read_trigger(PL011State *s)

>      else

>  #endif

>          s->read_trigger = 1;

>  }

>  

> +static unsigned int pl011_get_baudrate(const PL011State *s)

> +{

> +    uint64_t clk;

> +

> +    if (s->fbrd == 0) {

> +        return 0;

> +    }

> +

> +    clk = clock_get_hz(s->clk);

> +    return (clk / ((s->ibrd << 6) + s->fbrd)) << 2;

> +}

> +

> +static void pl011_trace_baudrate_change(const PL011State *s)

> +{

> +    trace_pl011_baudrate_change(pl011_get_baudrate(s),

> +                                clock_get_hz(s->clk),

> +                                s->ibrd, s->fbrd);

> +}

> +

>  static void pl011_write(void *opaque, hwaddr offset,

>                          uint64_t value, unsigned size)

>  {

>      PL011State *s = (PL011State *)opaque;

>      unsigned char ch;

> @@ -196,13 +216,15 @@ static void pl011_write(void *opaque, hwaddr offset,

>      case 8: /* UARTUARTILPR */

>          s->ilpr = value;

>          break;

>      case 9: /* UARTIBRD */

>          s->ibrd = value;

> +        pl011_trace_baudrate_change(s);

>          break;

>      case 10: /* UARTFBRD */

>          s->fbrd = value;

> +        pl011_trace_baudrate_change(s);

>          break;

>      case 11: /* UARTLCR_H */

>          /* Reset the FIFO state on FIFO enable or disable */

>          if ((s->lcr ^ value) & 0x10) {

>              s->read_count = 0;

> @@ -284,16 +306,33 @@ static void pl011_event(void *opaque, QEMUChrEvent event)

>  {

>      if (event == CHR_EVENT_BREAK)

>          pl011_put_fifo(opaque, 0x400);

>  }

>  

> +static void pl011_clock_update(void *opaque)

> +{

> +    PL011State *s = PL011(opaque);

> +

> +    pl011_trace_baudrate_change(s);

> +}

> +

>  static const MemoryRegionOps pl011_ops = {

>      .read = pl011_read,

>      .write = pl011_write,

>      .endianness = DEVICE_NATIVE_ENDIAN,

>  };

>  

> +static const VMStateDescription vmstate_pl011_clock = {

> +    .name = "pl011/clock",

> +    .version_id = 1,

> +    .minimum_version_id = 1,

> +    .fields = (VMStateField[]) {

> +        VMSTATE_CLOCK(clk, PL011State),

> +        VMSTATE_END_OF_LIST()

> +    }

> +};

> +

>  static const VMStateDescription vmstate_pl011 = {

>      .name = "pl011",

>      .version_id = 2,

>      .minimum_version_id = 2,

>      .fields = (VMStateField[]) {

> @@ -312,10 +351,14 @@ static const VMStateDescription vmstate_pl011 = {

>          VMSTATE_UINT32(ifl, PL011State),

>          VMSTATE_INT32(read_pos, PL011State),

>          VMSTATE_INT32(read_count, PL011State),

>          VMSTATE_INT32(read_trigger, PL011State),

>          VMSTATE_END_OF_LIST()

> +    },

> +    .subsections = (const VMStateDescription * []) {

> +        &vmstate_pl011_clock,

> +        NULL

>      }

>  };

>  

>  static Property pl011_properties[] = {

>      DEFINE_PROP_CHR("chardev", PL011State, chr),

> @@ -332,10 +375,12 @@ static void pl011_init(Object *obj)

>      sysbus_init_mmio(sbd, &s->iomem);

>      for (i = 0; i < ARRAY_SIZE(s->irq); i++) {

>          sysbus_init_irq(sbd, &s->irq[i]);

>      }

>  

> +    s->clk = qdev_init_clock_in(DEVICE(obj), "clk", pl011_clock_update, s);

> +

>      s->read_trigger = 1;

>      s->ifl = 0x12;

>      s->cr = 0x300;

>      s->flags = 0x90;

>  

> diff --git a/hw/char/trace-events b/hw/char/trace-events

> index 2442a9f7d5..cc1f0065ac 100644

> --- a/hw/char/trace-events

> +++ b/hw/char/trace-events

> @@ -62,10 +62,11 @@ pl011_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"

>  pl011_read_fifo(int read_count) "FIFO read, read_count now %d"

>  pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"

>  pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR 0x%08x read_count %d returning %d"

>  pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d"

>  pl011_put_fifo_full(void) "FIFO now full, RXFF set"

> +pl011_baudrate_change(unsigned int baudrate, uint64_t clock, uint32_t ibrd, uint32_t fbrd) "new baudrate %u (clk: %" PRIu64 "hz, ibrd: %" PRIu32 ", fbrd: %" PRIu32 ")"

>  

>  # cmsdk-apb-uart.c

>  cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"

>  cmsdk_apb_uart_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"

>  cmsdk_apb_uart_reset(void) "CMSDK APB UART: reset"

>
diff mbox series

Patch

diff --git a/include/hw/char/pl011.h b/include/hw/char/pl011.h
index a91ea50e11..33e5e5317b 100644
--- a/include/hw/char/pl011.h
+++ b/include/hw/char/pl011.h
@@ -47,10 +47,11 @@  struct PL011State {
     int read_pos;
     int read_count;
     int read_trigger;
     CharBackend chr;
     qemu_irq irq[6];
+    Clock *clk;
     const unsigned char *id;
 };
 
 static inline DeviceState *pl011_create(hwaddr addr,
                                         qemu_irq irq,
diff --git a/hw/char/pl011.c b/hw/char/pl011.c
index 13e784f9d9..ede16c781c 100644
--- a/hw/char/pl011.c
+++ b/hw/char/pl011.c
@@ -20,10 +20,11 @@ 
 
 #include "qemu/osdep.h"
 #include "hw/char/pl011.h"
 #include "hw/irq.h"
 #include "hw/sysbus.h"
+#include "hw/qdev-clock.h"
 #include "migration/vmstate.h"
 #include "chardev/char-fe.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "trace.h"
@@ -167,10 +168,29 @@  static void pl011_set_read_trigger(PL011State *s)
     else
 #endif
         s->read_trigger = 1;
 }
 
+static unsigned int pl011_get_baudrate(const PL011State *s)
+{
+    uint64_t clk;
+
+    if (s->fbrd == 0) {
+        return 0;
+    }
+
+    clk = clock_get_hz(s->clk);
+    return (clk / ((s->ibrd << 6) + s->fbrd)) << 2;
+}
+
+static void pl011_trace_baudrate_change(const PL011State *s)
+{
+    trace_pl011_baudrate_change(pl011_get_baudrate(s),
+                                clock_get_hz(s->clk),
+                                s->ibrd, s->fbrd);
+}
+
 static void pl011_write(void *opaque, hwaddr offset,
                         uint64_t value, unsigned size)
 {
     PL011State *s = (PL011State *)opaque;
     unsigned char ch;
@@ -196,13 +216,15 @@  static void pl011_write(void *opaque, hwaddr offset,
     case 8: /* UARTUARTILPR */
         s->ilpr = value;
         break;
     case 9: /* UARTIBRD */
         s->ibrd = value;
+        pl011_trace_baudrate_change(s);
         break;
     case 10: /* UARTFBRD */
         s->fbrd = value;
+        pl011_trace_baudrate_change(s);
         break;
     case 11: /* UARTLCR_H */
         /* Reset the FIFO state on FIFO enable or disable */
         if ((s->lcr ^ value) & 0x10) {
             s->read_count = 0;
@@ -284,16 +306,33 @@  static void pl011_event(void *opaque, QEMUChrEvent event)
 {
     if (event == CHR_EVENT_BREAK)
         pl011_put_fifo(opaque, 0x400);
 }
 
+static void pl011_clock_update(void *opaque)
+{
+    PL011State *s = PL011(opaque);
+
+    pl011_trace_baudrate_change(s);
+}
+
 static const MemoryRegionOps pl011_ops = {
     .read = pl011_read,
     .write = pl011_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
+static const VMStateDescription vmstate_pl011_clock = {
+    .name = "pl011/clock",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_CLOCK(clk, PL011State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_pl011 = {
     .name = "pl011",
     .version_id = 2,
     .minimum_version_id = 2,
     .fields = (VMStateField[]) {
@@ -312,10 +351,14 @@  static const VMStateDescription vmstate_pl011 = {
         VMSTATE_UINT32(ifl, PL011State),
         VMSTATE_INT32(read_pos, PL011State),
         VMSTATE_INT32(read_count, PL011State),
         VMSTATE_INT32(read_trigger, PL011State),
         VMSTATE_END_OF_LIST()
+    },
+    .subsections = (const VMStateDescription * []) {
+        &vmstate_pl011_clock,
+        NULL
     }
 };
 
 static Property pl011_properties[] = {
     DEFINE_PROP_CHR("chardev", PL011State, chr),
@@ -332,10 +375,12 @@  static void pl011_init(Object *obj)
     sysbus_init_mmio(sbd, &s->iomem);
     for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
         sysbus_init_irq(sbd, &s->irq[i]);
     }
 
+    s->clk = qdev_init_clock_in(DEVICE(obj), "clk", pl011_clock_update, s);
+
     s->read_trigger = 1;
     s->ifl = 0x12;
     s->cr = 0x300;
     s->flags = 0x90;
 
diff --git a/hw/char/trace-events b/hw/char/trace-events
index 2442a9f7d5..cc1f0065ac 100644
--- a/hw/char/trace-events
+++ b/hw/char/trace-events
@@ -62,10 +62,11 @@  pl011_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 pl011_read_fifo(int read_count) "FIFO read, read_count now %d"
 pl011_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR 0x%08x read_count %d returning %d"
 pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d"
 pl011_put_fifo_full(void) "FIFO now full, RXFF set"
+pl011_baudrate_change(unsigned int baudrate, uint64_t clock, uint32_t ibrd, uint32_t fbrd) "new baudrate %u (clk: %" PRIu64 "hz, ibrd: %" PRIu32 ", fbrd: %" PRIu32 ")"
 
 # cmsdk-apb-uart.c
 cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 cmsdk_apb_uart_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 cmsdk_apb_uart_reset(void) "CMSDK APB UART: reset"