@@ -21,7 +21,7 @@
#include "prm2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx_private.h"
-#include "cm2xxx.h"
+#include <linux/power/omap/cm2xxx.h>
#include "clockdomain.h"
/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
@@ -18,61 +18,11 @@
#include "prcm-common.h"
#include "cm2xxx_3xxx.h"
+#include <linux/power/omap/cm2xxx.h>
#define OMAP2420_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-/*
- * Module specific CM register offsets from CM_BASE + domain offset
- * Use cm_{read,write}_mod_reg() with these registers.
- * These register offsets generally appear in more than one PRCM submodule.
- */
-
-/* OMAP2-specific register offsets */
-
-#define OMAP24XX_CM_FCLKEN2 0x0004
-#define OMAP24XX_CM_ICLKEN4 0x001c
-#define OMAP24XX_CM_AUTOIDLE4 0x003c
-#define OMAP24XX_CM_IDLEST4 0x002c
-
-/* CM_IDLEST bit field values to indicate deasserted IdleReq */
-
-#define OMAP24XX_CM_IDLEST_VAL 0
-
-
-/* Clock management domain register get/set */
-
-#ifndef __ASSEMBLER__
-
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-
-extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
-extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
-
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
-
-extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
- u8 idlest_shift);
-extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
- s16 *prcm_inst, u8 *idlest_reg_id);
-extern int omap2xxx_cm_fclks_active(void);
-extern int omap2xxx_cm_mpu_retention_allowed(void);
-extern u32 omap2xxx_cm_get_core_clk_src(void);
-extern u32 omap2xxx_cm_get_core_pll_config(void);
-extern u32 omap2xxx_cm_get_pll_config(void);
-extern u32 omap2xxx_cm_get_pll_status(void);
-extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
- u32 mdm);
-
-extern int __init omap2xxx_cm_init(void);
-
-#endif
-
#endif
@@ -16,7 +16,7 @@
#include <linux/errno.h>
#include <linux/of.h>
-#include "cm2xxx.h"
+#include <linux/power/omap/cm2xxx.h>
#include "cm3xxx.h"
#include "cm44xx.h"
new file mode 100644
@@ -0,0 +1,70 @@
+/*
+ * OMAP2xxx Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __LINUX_POWER_OMAP_CM2XXX_H
+#define __LINUX_POWER_OMAP_CM2XXX_H
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP2-specific register offsets */
+
+#define OMAP24XX_CM_FCLKEN2 0x0004
+#define OMAP24XX_CM_ICLKEN4 0x001c
+#define OMAP24XX_CM_AUTOIDLE4 0x003c
+#define OMAP24XX_CM_IDLEST4 0x002c
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP24XX_CM_IDLEST_VAL 0
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+
+void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+
+void omap2xxx_cm_set_dpll_disable_autoidle(void);
+void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+
+void omap2xxx_cm_set_apll54_disable_autoidle(void);
+void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
+void omap2xxx_cm_set_apll96_disable_autoidle(void);
+void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+
+bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+ s16 *prcm_inst, u8 *idlest_reg_id);
+int omap2xxx_cm_fclks_active(void);
+int omap2xxx_cm_mpu_retention_allowed(void);
+u32 omap2xxx_cm_get_core_clk_src(void);
+u32 omap2xxx_cm_get_core_pll_config(void);
+u32 omap2xxx_cm_get_pll_config(void);
+u32 omap2xxx_cm_get_pll_status(void);
+void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
+ u32 mdm);
+
+int __init omap2xxx_cm_init(void);
+
+#endif
+
+#endif
This file needs to be accessible from the PRCM core and mach-omap2 board support code. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/cm2xxx.c | 2 +- arch/arm/mach-omap2/cm2xxx.h | 52 +-------------------------- arch/arm/mach-omap2/cm_common.c | 2 +- include/linux/power/omap/cm2xxx.h | 70 +++++++++++++++++++++++++++++++++++++ 4 files changed, 73 insertions(+), 53 deletions(-) create mode 100644 include/linux/power/omap/cm2xxx.h