@@ -338,15 +338,68 @@ static void encode_cache_cpuid80000006(CPUCacheInfo *l2,
}
}
+/*
+ * Definitions used for building CPUID Leaf 0x8000001D and 0x8000001E
+ * Please refer to the AMD64 Architecture Programmer’s Manual Volume 3.
+ * Define the constants to build the cpu topology. Right now, TOPOEXT
+ * feature is enabled only on EPYC. So, these constants are based on
+ * EPYC supported configurations. We may need to handle the cases if
+ * these values change in future.
+ */
+/* Maximum core complexes in a node */
+#define MAX_CCX 2
+/* Maximum cores in a core complex */
+#define MAX_CORES_IN_CCX 4
+/* Maximum cores in a node */
+#define MAX_CORES_IN_NODE 8
+/* Maximum nodes in a socket */
+#define MAX_NODES_PER_SOCKET 4
+
+/*
+ * Figure out the number of nodes required to build this config.
+ * Max cores in a node is 8
+ */
+static int nodes_in_socket(int nr_cores)
+{
+ int nodes;
+
+ nodes = DIV_ROUND_UP(nr_cores, MAX_CORES_IN_NODE);
+
+ /* Hardware does not support config with 3 nodes, return 4 in that case */
+ return (nodes == 3) ? 4 : nodes;
+}
+
+/*
+ * Decide the number of cores in a core complex with the given nr_cores using
+ * following set constants MAX_CCX, MAX_CORES_IN_CCX, MAX_CORES_IN_NODE and
+ * MAX_NODES_PER_SOCKET. Maintain symmetry as much as possible
+ * L3 cache is shared across all cores in a core complex. So, this will also
+ * tell us how many cores are sharing the L3 cache.
+ */
+static int cores_in_core_complex(int nr_cores)
+{
+ int nodes;
+
+ /* Check if we can fit all the cores in one core complex */
+ if (nr_cores <= MAX_CORES_IN_CCX) {
+ return nr_cores;
+ }
+ /* Get the number of nodes required to build this config */
+ nodes = nodes_in_socket(nr_cores);
+
+ /*
+ * Divide the cores accros all the core complexes
+ * Return rounded up value
+ */
+ return DIV_ROUND_UP(nr_cores, nodes * MAX_CCX);
+}
+
/* Encode cache info for CPUID[8000001D] */
-static void encode_cache_cpuid8000001d(CPUCacheInfo *cache,
- X86CPUTopoInfo *topo_info,
- uint32_t *eax, uint32_t *ebx,
- uint32_t *ecx, uint32_t *edx)
+static void encode_cache_cpuid8000001d(CPUCacheInfo *cache, CPUState *cs,
+ uint32_t *eax, uint32_t *ebx,
+ uint32_t *ecx, uint32_t *edx)
{
uint32_t l3_cores;
- unsigned nodes = MAX(topo_info->nodes_per_pkg, 1);
-
assert(cache->size == cache->line_size * cache->associativity *
cache->partitions * cache->sets);
@@ -355,13 +408,10 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache,
/* L3 is shared among multiple cores */
if (cache->level == 3) {
- l3_cores = DIV_ROUND_UP((topo_info->dies_per_pkg *
- topo_info->cores_per_die *
- topo_info->threads_per_core),
- nodes);
- *eax |= (l3_cores - 1) << 14;
+ l3_cores = cores_in_core_complex(cs->nr_cores);
+ *eax |= ((l3_cores * cs->nr_threads) - 1) << 14;
} else {
- *eax |= ((topo_info->threads_per_core - 1) << 14);
+ *eax |= ((cs->nr_threads - 1) << 14);
}
assert(cache->line_size > 0);
@@ -381,17 +431,55 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache,
(cache->complex_indexing ? CACHE_COMPLEX_IDX : 0);
}
+/* Data structure to hold the configuration info for a given core index */
+struct core_topology {
+ /* core complex id of the current core index */
+ int ccx_id;
+ /*
+ * Adjusted core index for this core in the topology
+ * This can be 0,1,2,3 with max 4 cores in a core complex
+ */
+ int core_id;
+ /* Node id for this core index */
+ int node_id;
+ /* Number of nodes in this config */
+ int num_nodes;
+};
+
+/*
+ * Build the configuration closely match the EPYC hardware. Using the EPYC
+ * hardware configuration values (MAX_CCX, MAX_CORES_IN_CCX, MAX_CORES_IN_NODE)
+ * right now. This could change in future.
+ * nr_cores : Total number of cores in the config
+ * core_id : Core index of the current CPU
+ * topo : Data structure to hold all the config info for this core index
+ */
+static void build_core_topology(int nr_cores, int core_id,
+ struct core_topology *topo)
+{
+ int nodes, cores_in_ccx;
+
+ /* First get the number of nodes required */
+ nodes = nodes_in_socket(nr_cores);
+
+ cores_in_ccx = cores_in_core_complex(nr_cores);
+
+ topo->node_id = core_id / (cores_in_ccx * MAX_CCX);
+ topo->ccx_id = (core_id % (cores_in_ccx * MAX_CCX)) / cores_in_ccx;
+ topo->core_id = core_id % cores_in_ccx;
+ topo->num_nodes = nodes;
+}
+
/* Encode cache info for CPUID[8000001E] */
-static void encode_topo_cpuid8000001e(X86CPUTopoInfo *topo_info, X86CPU *cpu,
+static void encode_topo_cpuid8000001e(CPUState *cs, X86CPU *cpu,
uint32_t *eax, uint32_t *ebx,
uint32_t *ecx, uint32_t *edx)
{
- X86CPUTopoIDs topo_ids = {0};
- unsigned long nodes = MAX(topo_info->nodes_per_pkg, 1);
+ struct core_topology topo = {0};
+ unsigned long nodes;
int shift;
- x86_topo_ids_from_apicid_epyc(cpu->apic_id, topo_info, &topo_ids);
-
+ build_core_topology(cs->nr_cores, cpu->core_id, &topo);
*eax = cpu->apic_id;
/*
* CPUID_Fn8000001E_EBX
@@ -408,8 +496,12 @@ static void encode_topo_cpuid8000001e(X86CPUTopoInfo *topo_info, X86CPU *cpu,
* 3 Core complex id
* 1:0 Core id
*/
- *ebx = ((topo_info->threads_per_core - 1) << 8) | (topo_ids.node_id << 3) |
- (topo_ids.core_id);
+ if (cs->nr_threads - 1) {
+ *ebx = ((cs->nr_threads - 1) << 8) | (topo.node_id << 3) |
+ (topo.ccx_id << 2) | topo.core_id;
+ } else {
+ *ebx = (topo.node_id << 4) | (topo.ccx_id << 3) | topo.core_id;
+ }
/*
* CPUID_Fn8000001E_ECX
* 31:11 Reserved
@@ -418,8 +510,9 @@ static void encode_topo_cpuid8000001e(X86CPUTopoInfo *topo_info, X86CPU *cpu,
* 2 Socket id
* 1:0 Node id
*/
- if (nodes <= 4) {
- *ecx = ((nodes - 1) << 8) | (topo_ids.pkg_id << 2) | topo_ids.node_id;
+ if (topo.num_nodes <= 4) {
+ *ecx = ((topo.num_nodes - 1) << 8) | (cpu->socket_id << 2) |
+ topo.node_id;
} else {
/*
* Node id fix up. Actual hardware supports up to 4 nodes. But with
@@ -434,10 +527,10 @@ static void encode_topo_cpuid8000001e(X86CPUTopoInfo *topo_info, X86CPU *cpu,
* number of nodes. find_last_bit returns last set bit(0 based). Left
* shift(+1) the socket id to represent all the nodes.
*/
- nodes -= 1;
+ nodes = topo.num_nodes - 1;
shift = find_last_bit(&nodes, 8);
- *ecx = (nodes << 8) | (topo_ids.pkg_id << (shift + 1)) |
- topo_ids.node_id;
+ *ecx = ((topo.num_nodes - 1) << 8) | (cpu->socket_id << (shift + 1)) |
+ topo.node_id;
}
*edx = 0;
}
@@ -5471,7 +5564,6 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
uint32_t signature[3];
X86CPUTopoInfo topo_info;
- topo_info.nodes_per_pkg = env->nr_nodes;
topo_info.dies_per_pkg = env->nr_dies;
topo_info.cores_per_die = cs->nr_cores;
topo_info.threads_per_core = cs->nr_threads;
@@ -5902,20 +5994,20 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
}
switch (count) {
case 0: /* L1 dcache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l1d_cache,
- &topo_info, eax, ebx, ecx, edx);
+ encode_cache_cpuid8000001d(env->cache_info_amd.l1d_cache, cs,
+ eax, ebx, ecx, edx);
break;
case 1: /* L1 icache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l1i_cache,
- &topo_info, eax, ebx, ecx, edx);
+ encode_cache_cpuid8000001d(env->cache_info_amd.l1i_cache, cs,
+ eax, ebx, ecx, edx);
break;
case 2: /* L2 cache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l2_cache,
- &topo_info, eax, ebx, ecx, edx);
+ encode_cache_cpuid8000001d(env->cache_info_amd.l2_cache, cs,
+ eax, ebx, ecx, edx);
break;
case 3: /* L3 cache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l3_cache,
- &topo_info, eax, ebx, ecx, edx);
+ encode_cache_cpuid8000001d(env->cache_info_amd.l3_cache, cs,
+ eax, ebx, ecx, edx);
break;
default: /* end of info */
*eax = *ebx = *ecx = *edx = 0;
@@ -5924,7 +6016,8 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
break;
case 0x8000001E:
assert(cpu->core_id <= 255);
- encode_topo_cpuid8000001e(&topo_info, cpu, eax, ebx, ecx, edx);
+ encode_topo_cpuid8000001e(cs, cpu,
+ eax, ebx, ecx, edx);
break;
case 0xC0000000:
*eax = env->cpuid_xlevel2;