@@ -30,7 +30,7 @@
#include "soc.h"
#include <linux/power/omap/clockdomain.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
/* clkdm_list contains all registered struct clockdomains */
static LIST_HEAD(clkdm_list);
@@ -25,7 +25,7 @@
#include <linux/power/omap/clockdomain.h>
#include <linux/power/omap/prcm-common.h>
#include <linux/power/omap/prm2xxx_3xxx.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
#define DPLL_AUTOIDLE_DISABLE 0x0
@@ -24,7 +24,7 @@
#include <linux/power/omap/cm3xxx.h>
#include <linux/power/omap/clockdomain.h>
#include <linux/power/omap/prcm-common.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0
#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1
@@ -28,7 +28,7 @@
#include <linux/cpu_pm.h>
#include <asm/cpuidle.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/clockdomain.h>
#include "pm.h"
@@ -28,7 +28,7 @@
#include "omap_device.h"
#include "omap-pm.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
@@ -31,7 +31,7 @@
#include "soc.h"
#include "iomap.h"
#include "voltage.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/clockdomain.h>
#include "common.h"
#include "clock.h"
@@ -21,7 +21,7 @@
#include "omap-wakeupgen.h"
#include "common.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
/*
* platform-specific code to shutdown a CPU
@@ -150,7 +150,7 @@
#include "soc.h"
#include "common.h"
#include <linux/power/omap/clockdomain.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "cm2xxx.h"
#include "cm3xxx.h"
#include <linux/power/omap/cm44xx.h>
@@ -28,7 +28,7 @@
#include <linux/slab.h>
#include "clock.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/clockdomain.h>
#include "omap-pm.h"
@@ -27,7 +27,7 @@
#include "soc.h"
#include <linux/power/omap/prcm-common.h>
#include "voltage.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/clockdomain.h>
#include "pm.h"
#include "twl-common.h"
@@ -13,7 +13,7 @@
#include <linux/err.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#ifdef CONFIG_CPU_IDLE
extern int __init omap3_idle_init(void);
@@ -51,7 +51,7 @@
#include "sram.h"
#include "pm.h"
#include "control.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/clockdomain.h>
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
@@ -38,7 +38,7 @@
#include <asm/system_misc.h>
#include <linux/power/omap/clockdomain.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "soc.h"
#include "common.h"
#include "cm3xxx.h"
@@ -21,7 +21,7 @@
#include "soc.h"
#include "common.h"
#include <linux/power/omap/clockdomain.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "pm.h"
u16 pm44xx_errata;
@@ -30,7 +30,7 @@
#include <asm/cpu.h>
#include <linux/power/omap/prm.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/clockdomain.h>
#include "voltage.h"
deleted file mode 100644
@@ -1,277 +0,0 @@
-/*
- * OMAP2/3/4 powerdomain control
- *
- * Copyright (C) 2007-2008, 2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX This should be moved to the mach-omap2/ directory at the earliest
- * opportunity.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
-#define __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-/* Powerdomain basic power states */
-#define PWRDM_POWER_OFF 0x0
-#define PWRDM_POWER_RET 0x1
-#define PWRDM_POWER_INACTIVE 0x2
-#define PWRDM_POWER_ON 0x3
-
-#define PWRDM_MAX_PWRSTS 4
-
-/* Powerdomain allowable state bitfields */
-#define PWRSTS_ON (1 << PWRDM_POWER_ON)
-#define PWRSTS_INACTIVE (1 << PWRDM_POWER_INACTIVE)
-#define PWRSTS_RET (1 << PWRDM_POWER_RET)
-#define PWRSTS_OFF (1 << PWRDM_POWER_OFF)
-
-#define PWRSTS_OFF_ON (PWRSTS_OFF | PWRSTS_ON)
-#define PWRSTS_OFF_RET (PWRSTS_OFF | PWRSTS_RET)
-#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
-#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | PWRSTS_ON)
-
-
-/*
- * Powerdomain flags (struct powerdomain.flags)
- *
- * PWRDM_HAS_HDWR_SAR - powerdomain has hardware save-and-restore support
- *
- * PWRDM_HAS_MPU_QUIRK - MPU pwr domain has MEM bank 0 bits in MEM
- * bank 1 position. This is true for OMAP3430
- *
- * PWRDM_HAS_LOWPOWERSTATECHANGE - can transition from a sleep state
- * to a lower sleep state without waking up the powerdomain
- */
-#define PWRDM_HAS_HDWR_SAR BIT(0)
-#define PWRDM_HAS_MPU_QUIRK BIT(1)
-#define PWRDM_HAS_LOWPOWERSTATECHANGE BIT(2)
-
-/*
- * Number of memory banks that are power-controllable. On OMAP4430, the
- * maximum is 5.
- */
-#define PWRDM_MAX_MEM_BANKS 5
-
-/*
- * Maximum number of clockdomains that can be associated with a powerdomain.
- * PER powerdomain on AM33XX is the worst case
- */
-#define PWRDM_MAX_CLKDMS 11
-
-/* XXX A completely arbitrary number. What is reasonable here? */
-#define PWRDM_TRANSITION_BAILOUT 100000
-
-struct clockdomain;
-struct powerdomain;
-struct voltagedomain;
-
-/**
- * struct powerdomain - OMAP powerdomain
- * @name: Powerdomain name
- * @voltdm: voltagedomain containing this powerdomain
- * @prcm_offs: the address offset from CM_BASE/PRM_BASE
- * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
- * @pwrsts: Possible powerdomain power states
- * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
- * @flags: Powerdomain flags
- * @banks: Number of software-controllable memory banks in this powerdomain
- * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
- * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
- * @pwrdm_clkdms: Clockdomains in this powerdomain
- * @node: list_head linking all powerdomains
- * @voltdm_node: list_head linking all powerdomains in a voltagedomain
- * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
- * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
- * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
- * in @pwrstctrl_offs
- * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
- * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs
- * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
- * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
- * in @pwrstctrl_offs
- * @state:
- * @state_counter:
- * @timer:
- * @state_timer:
- * @_lock: spinlock used to serialize powerdomain and some clockdomain ops
- * @_lock_flags: stored flags when @_lock is taken
- *
- * @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
- */
-struct powerdomain {
- const char *name;
- union {
- const char *name;
- struct voltagedomain *ptr;
- } voltdm;
- const s16 prcm_offs;
- const u8 pwrsts;
- const u8 pwrsts_logic_ret;
- const u8 flags;
- const u8 banks;
- const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
- const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
- const u8 prcm_partition;
- struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
- struct list_head node;
- struct list_head voltdm_node;
- int state;
- unsigned state_counter[PWRDM_MAX_PWRSTS];
- unsigned ret_logic_off_counter;
- unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
- spinlock_t _lock;
- unsigned long _lock_flags;
- const u8 pwrstctrl_offs;
- const u8 pwrstst_offs;
- const u32 logicretstate_mask;
- const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
- const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
- const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
- const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
-
-#ifdef CONFIG_PM_DEBUG
- s64 timer;
- s64 state_timer[PWRDM_MAX_PWRSTS];
-#endif
-};
-
-/**
- * struct pwrdm_ops - Arch specific function implementations
- * @pwrdm_set_next_pwrst: Set the target power state for a pd
- * @pwrdm_read_next_pwrst: Read the target power state set for a pd
- * @pwrdm_read_pwrst: Read the current power state of a pd
- * @pwrdm_read_prev_pwrst: Read the prev power state entered by the pd
- * @pwrdm_set_logic_retst: Set the logic state in RET for a pd
- * @pwrdm_set_mem_onst: Set the Memory state in ON for a pd
- * @pwrdm_set_mem_retst: Set the Memory state in RET for a pd
- * @pwrdm_read_logic_pwrst: Read the current logic state of a pd
- * @pwrdm_read_prev_logic_pwrst: Read the previous logic state entered by a pd
- * @pwrdm_read_logic_retst: Read the logic state in RET for a pd
- * @pwrdm_read_mem_pwrst: Read the current memory state of a pd
- * @pwrdm_read_prev_mem_pwrst: Read the previous memory state entered by a pd
- * @pwrdm_read_mem_retst: Read the memory state in RET for a pd
- * @pwrdm_clear_all_prev_pwrst: Clear all previous power states logged for a pd
- * @pwrdm_enable_hdwr_sar: Enable Hardware Save-Restore feature for the pd
- * @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd
- * @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep
- * @pwrdm_wait_transition: Wait for a pd state transition to complete
- * @pwrdm_has_voltdm: Check if a voltdm association is needed
- *
- * Regarding @pwrdm_set_lowpwrstchange: On the OMAP2 and 3-family
- * chips, a powerdomain's power state is not allowed to directly
- * transition from one low-power state (e.g., CSWR) to another
- * low-power state (e.g., OFF) without first waking up the
- * powerdomain. This wastes energy. So OMAP4 chips support the
- * ability to transition a powerdomain power state directly from one
- * low-power state to another. The function pointed to by
- * @pwrdm_set_lowpwrstchange is intended to configure the OMAP4
- * hardware powerdomain state machine to enable this feature.
- */
-struct pwrdm_ops {
- int (*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst);
- int (*pwrdm_read_next_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_prev_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_set_logic_retst)(struct powerdomain *pwrdm, u8 pwrst);
- int (*pwrdm_set_mem_onst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
- int (*pwrdm_set_mem_retst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
- int (*pwrdm_read_logic_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_prev_logic_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_logic_retst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
- int (*pwrdm_read_prev_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
- int (*pwrdm_read_mem_retst)(struct powerdomain *pwrdm, u8 bank);
- int (*pwrdm_clear_all_prev_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_enable_hdwr_sar)(struct powerdomain *pwrdm);
- int (*pwrdm_disable_hdwr_sar)(struct powerdomain *pwrdm);
- int (*pwrdm_set_lowpwrstchange)(struct powerdomain *pwrdm);
- int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
- int (*pwrdm_has_voltdm)(void);
-};
-
-int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
-int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
-int pwrdm_complete_init(void);
-
-struct powerdomain *pwrdm_lookup(const char *name);
-
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user);
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user);
-
-int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
- int (*fn)(struct powerdomain *pwrdm,
- struct clockdomain *clkdm));
-struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
-
-int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
-
-int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
-int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
-
-int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-
-int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
-int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
-
-int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
-int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
-bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
-
-int pwrdm_state_switch_nolock(struct powerdomain *pwrdm);
-int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_pre_transition(struct powerdomain *pwrdm);
-int pwrdm_post_transition(struct powerdomain *pwrdm);
-int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
-bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
-
-extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
-
-extern void omap242x_powerdomains_init(void);
-extern void omap243x_powerdomains_init(void);
-extern void omap3xxx_powerdomains_init(void);
-extern void am33xx_powerdomains_init(void);
-extern void omap44xx_powerdomains_init(void);
-extern void omap54xx_powerdomains_init(void);
-extern void dra7xx_powerdomains_init(void);
-void am43xx_powerdomains_init(void);
-
-extern struct pwrdm_ops omap2_pwrdm_operations;
-extern struct pwrdm_ops omap3_pwrdm_operations;
-extern struct pwrdm_ops am33xx_pwrdm_operations;
-extern struct pwrdm_ops omap4_pwrdm_operations;
-
-/* Common Internal functions used across OMAP rev's */
-extern u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank);
-extern u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank);
-extern u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank);
-
-extern struct powerdomain wkup_omap2_pwrdm;
-extern struct powerdomain gfx_omap2_pwrdm;
-
-extern void pwrdm_lock(struct powerdomain *pwrdm);
-extern void pwrdm_unlock(struct powerdomain *pwrdm);
-
-#endif
@@ -31,7 +31,7 @@
* address offset is different between the C55 and C64 DSPs.
*/
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prcm-common.h>
#include <linux/power/omap/prm.h>
@@ -14,7 +14,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
#define __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
extern struct powerdomain gfx_omap2_pwrdm;
extern struct powerdomain wkup_omap2_pwrdm;
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include "soc.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "powerdomains2xxx_3xxx_data.h"
#include <linux/power/omap/prcm-common.h>
@@ -16,7 +16,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prcm-common.h>
#include "prm-regbits-33xx.h"
#include "prm33xx.h"
@@ -16,7 +16,7 @@
#include <linux/bug.h>
#include "soc.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "powerdomains2xxx_3xxx_data.h"
#include <linux/power/omap/prcm-common.h>
#include <linux/power/omap/prm2xxx_3xxx.h>
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prcm-common.h>
#include "prcm43xx.h"
@@ -22,7 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prcm-common.h>
#include <linux/power/omap/prcm44xx.h>
@@ -21,7 +21,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prcm-common.h>
#include <linux/power/omap/prcm44xx.h>
@@ -23,7 +23,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prcm-common.h>
#include <linux/power/omap/prcm44xx.h>
@@ -18,7 +18,7 @@
#include <linux/io.h>
#include <linux/irq.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/clockdomain.h>
#include <linux/power/omap/prm2xxx.h>
#include "prm2xxx_3xxx_private.h"
@@ -16,7 +16,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "prm2xxx_3xxx_private.h"
#include <linux/power/omap/clockdomain.h>
@@ -23,7 +23,7 @@
#ifndef __ASSEMBLER__
#include <linux/io.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
/* Power/reset management domain register get/set */
static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <linux/power/omap/prm33xx.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prm.h>
#define AM33XX_LASTPOWERSTATEENTERED_SHIFT 24
@@ -18,7 +18,7 @@
#include <linux/io.h>
#include <linux/irq.h>
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prm3xxx.h>
#include "prm2xxx_3xxx_private.h"
#include "cm2xxx_3xxx_private.h"
@@ -24,7 +24,7 @@
#include <linux/power/omap/prm7xx.h>
#include <linux/power/omap/prcm44xx.h>
#include "prminst44xx_private.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include <linux/power/omap/prm.h>
#include <linux/power/omap/prcm-common.h>
#include <linux/power/omap/prm44xx_54xx.h>
@@ -54,7 +54,7 @@
#include "soc.h"
#include "common.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "omap-secure.h"
#define REALTIME_COUNTER_BASE 0x48243200
@@ -36,7 +36,7 @@
#include "control.h"
#include "voltage.h"
-#include "powerdomain.h"
+#include <linux/power/omap/powerdomain.h>
#include "vc.h"
#include "vp.h"
new file mode 100644
@@ -0,0 +1,280 @@
+/*
+ * OMAP2/3/4 powerdomain control
+ *
+ * Copyright (C) 2007-2008, 2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2011 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This should be moved to the mach-omap2/ directory at the earliest
+ * opportunity.
+ */
+
+#ifndef __LINUX_POWER_OMAP_POWERDOMAIN_H
+#define __LINUX_POWER_OMAP_POWERDOMAIN_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/* Powerdomain basic power states */
+#define PWRDM_POWER_OFF 0x0
+#define PWRDM_POWER_RET 0x1
+#define PWRDM_POWER_INACTIVE 0x2
+#define PWRDM_POWER_ON 0x3
+
+#define PWRDM_MAX_PWRSTS 4
+
+/* Powerdomain allowable state bitfields */
+#define PWRSTS_ON (1 << PWRDM_POWER_ON)
+#define PWRSTS_INACTIVE (1 << PWRDM_POWER_INACTIVE)
+#define PWRSTS_RET (1 << PWRDM_POWER_RET)
+#define PWRSTS_OFF (1 << PWRDM_POWER_OFF)
+
+#define PWRSTS_OFF_ON (PWRSTS_OFF | PWRSTS_ON)
+#define PWRSTS_OFF_RET (PWRSTS_OFF | PWRSTS_RET)
+#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
+#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | PWRSTS_ON)
+
+
+/*
+ * Powerdomain flags (struct powerdomain.flags)
+ *
+ * PWRDM_HAS_HDWR_SAR - powerdomain has hardware save-and-restore support
+ *
+ * PWRDM_HAS_MPU_QUIRK - MPU pwr domain has MEM bank 0 bits in MEM
+ * bank 1 position. This is true for OMAP3430
+ *
+ * PWRDM_HAS_LOWPOWERSTATECHANGE - can transition from a sleep state
+ * to a lower sleep state without waking up the powerdomain
+ */
+#define PWRDM_HAS_HDWR_SAR BIT(0)
+#define PWRDM_HAS_MPU_QUIRK BIT(1)
+#define PWRDM_HAS_LOWPOWERSTATECHANGE BIT(2)
+
+/*
+ * Number of memory banks that are power-controllable. On OMAP4430, the
+ * maximum is 5.
+ */
+#define PWRDM_MAX_MEM_BANKS 5
+
+/*
+ * Maximum number of clockdomains that can be associated with a powerdomain.
+ * PER powerdomain on AM33XX is the worst case
+ */
+#define PWRDM_MAX_CLKDMS 11
+
+/* XXX A completely arbitrary number. What is reasonable here? */
+#define PWRDM_TRANSITION_BAILOUT 100000
+
+struct clockdomain;
+struct powerdomain;
+struct voltagedomain;
+
+/**
+ * struct powerdomain - OMAP powerdomain
+ * @name: Powerdomain name
+ * @voltdm: voltagedomain containing this powerdomain
+ * @prcm_offs: the address offset from CM_BASE/PRM_BASE
+ * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
+ * @pwrsts: Possible powerdomain power states
+ * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
+ * @flags: Powerdomain flags
+ * @banks: Number of software-controllable memory banks in this powerdomain
+ * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
+ * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
+ * @pwrdm_clkdms: Clockdomains in this powerdomain
+ * @node: list_head linking all powerdomains
+ * @voltdm_node: list_head linking all powerdomains in a voltagedomain
+ * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
+ * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
+ * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
+ * in @pwrstctrl_offs
+ * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
+ * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs
+ * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
+ * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
+ * in @pwrstctrl_offs
+ * @state:
+ * @state_counter:
+ * @timer:
+ * @state_timer:
+ * @_lock: spinlock used to serialize powerdomain and some clockdomain ops
+ * @_lock_flags: stored flags when @_lock is taken
+ *
+ * @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
+ */
+struct powerdomain {
+ const char *name;
+ union {
+ const char *name;
+ struct voltagedomain *ptr;
+ } voltdm;
+ const s16 prcm_offs;
+ const u8 pwrsts;
+ const u8 pwrsts_logic_ret;
+ const u8 flags;
+ const u8 banks;
+ const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
+ const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
+ const u8 prcm_partition;
+ struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
+ struct list_head node;
+ struct list_head voltdm_node;
+ int state;
+ unsigned state_counter[PWRDM_MAX_PWRSTS];
+ unsigned ret_logic_off_counter;
+ unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
+ spinlock_t _lock;
+ unsigned long _lock_flags;
+ const u8 pwrstctrl_offs;
+ const u8 pwrstst_offs;
+ const u32 logicretstate_mask;
+ const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
+
+#ifdef CONFIG_PM_DEBUG
+ s64 timer;
+ s64 state_timer[PWRDM_MAX_PWRSTS];
+#endif
+};
+
+/**
+ * struct pwrdm_ops - Arch specific function implementations
+ * @pwrdm_set_next_pwrst: Set the target power state for a pd
+ * @pwrdm_read_next_pwrst: Read the target power state set for a pd
+ * @pwrdm_read_pwrst: Read the current power state of a pd
+ * @pwrdm_read_prev_pwrst: Read the prev power state entered by the pd
+ * @pwrdm_set_logic_retst: Set the logic state in RET for a pd
+ * @pwrdm_set_mem_onst: Set the Memory state in ON for a pd
+ * @pwrdm_set_mem_retst: Set the Memory state in RET for a pd
+ * @pwrdm_read_logic_pwrst: Read the current logic state of a pd
+ * @pwrdm_read_prev_logic_pwrst: Read the previous logic state entered by a pd
+ * @pwrdm_read_logic_retst: Read the logic state in RET for a pd
+ * @pwrdm_read_mem_pwrst: Read the current memory state of a pd
+ * @pwrdm_read_prev_mem_pwrst: Read the previous memory state entered by a pd
+ * @pwrdm_read_mem_retst: Read the memory state in RET for a pd
+ * @pwrdm_clear_all_prev_pwrst: Clear all previous power states logged for a pd
+ * @pwrdm_enable_hdwr_sar: Enable Hardware Save-Restore feature for the pd
+ * @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd
+ * @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep
+ * @pwrdm_wait_transition: Wait for a pd state transition to complete
+ * @pwrdm_has_voltdm: Check if a voltdm association is needed
+ *
+ * Regarding @pwrdm_set_lowpwrstchange: On the OMAP2 and 3-family
+ * chips, a powerdomain's power state is not allowed to directly
+ * transition from one low-power state (e.g., CSWR) to another
+ * low-power state (e.g., OFF) without first waking up the
+ * powerdomain. This wastes energy. So OMAP4 chips support the
+ * ability to transition a powerdomain power state directly from one
+ * low-power state to another. The function pointed to by
+ * @pwrdm_set_lowpwrstchange is intended to configure the OMAP4
+ * hardware powerdomain state machine to enable this feature.
+ */
+struct pwrdm_ops {
+ int (*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst);
+ int (*pwrdm_read_next_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_prev_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_set_logic_retst)(struct powerdomain *pwrdm, u8 pwrst);
+ int (*pwrdm_set_mem_onst)(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+ int (*pwrdm_set_mem_retst)(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+ int (*pwrdm_read_logic_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_prev_logic_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_logic_retst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
+ int (*pwrdm_read_prev_mem_pwrst)(struct powerdomain *pwrdm,
+ u8 bank);
+ int (*pwrdm_read_mem_retst)(struct powerdomain *pwrdm, u8 bank);
+ int (*pwrdm_clear_all_prev_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_enable_hdwr_sar)(struct powerdomain *pwrdm);
+ int (*pwrdm_disable_hdwr_sar)(struct powerdomain *pwrdm);
+ int (*pwrdm_set_lowpwrstchange)(struct powerdomain *pwrdm);
+ int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
+ int (*pwrdm_has_voltdm)(void);
+};
+
+int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
+int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
+int pwrdm_complete_init(void);
+
+struct powerdomain *pwrdm_lookup(const char *name);
+
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
+
+int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
+ int (*fn)(struct powerdomain *pwrdm,
+ struct clockdomain *clkdm));
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
+
+int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
+
+int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
+int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
+
+int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+
+int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
+int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
+
+int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
+int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
+bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
+
+int pwrdm_state_switch_nolock(struct powerdomain *pwrdm);
+int pwrdm_state_switch(struct powerdomain *pwrdm);
+int pwrdm_pre_transition(struct powerdomain *pwrdm);
+int pwrdm_post_transition(struct powerdomain *pwrdm);
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
+bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
+
+int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
+
+void omap242x_powerdomains_init(void);
+void omap243x_powerdomains_init(void);
+void omap3xxx_powerdomains_init(void);
+void am33xx_powerdomains_init(void);
+void omap44xx_powerdomains_init(void);
+void omap54xx_powerdomains_init(void);
+void dra7xx_powerdomains_init(void);
+void am43xx_powerdomains_init(void);
+
+extern struct pwrdm_ops omap2_pwrdm_operations;
+extern struct pwrdm_ops omap3_pwrdm_operations;
+extern struct pwrdm_ops am33xx_pwrdm_operations;
+extern struct pwrdm_ops omap4_pwrdm_operations;
+
+/* Common Internal functions used across OMAP rev's */
+u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank);
+u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank);
+u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank);
+
+extern struct powerdomain wkup_omap2_pwrdm;
+extern struct powerdomain gfx_omap2_pwrdm;
+
+void pwrdm_lock(struct powerdomain *pwrdm);
+void pwrdm_unlock(struct powerdomain *pwrdm);
+
+#endif
This file needs to be accessible from the PRCM core and mach-omap2 board support code. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/clockdomain.c | 2 +- arch/arm/mach-omap2/cm2xxx.c | 2 +- arch/arm/mach-omap2/cm3xxx.c | 2 +- arch/arm/mach-omap2/cpuidle34xx.c | 2 +- arch/arm/mach-omap2/gpio.c | 2 +- arch/arm/mach-omap2/io.c | 2 +- arch/arm/mach-omap2/omap-hotplug.c | 2 +- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/pm-debug.c | 2 +- arch/arm/mach-omap2/pm.c | 2 +- arch/arm/mach-omap2/pm.h | 2 +- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 2 +- arch/arm/mach-omap2/pm44xx.c | 2 +- arch/arm/mach-omap2/powerdomain.c | 2 +- arch/arm/mach-omap2/powerdomain.h | 277 --------------------- arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 2 +- arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h | 2 +- arch/arm/mach-omap2/powerdomains2xxx_data.c | 2 +- arch/arm/mach-omap2/powerdomains33xx_data.c | 2 +- arch/arm/mach-omap2/powerdomains3xxx_data.c | 2 +- arch/arm/mach-omap2/powerdomains43xx_data.c | 2 +- arch/arm/mach-omap2/powerdomains44xx_data.c | 2 +- arch/arm/mach-omap2/powerdomains54xx_data.c | 2 +- arch/arm/mach-omap2/powerdomains7xx_data.c | 2 +- arch/arm/mach-omap2/prm2xxx.c | 2 +- arch/arm/mach-omap2/prm2xxx_3xxx.c | 2 +- arch/arm/mach-omap2/prm2xxx_3xxx_private.h | 2 +- arch/arm/mach-omap2/prm33xx.c | 2 +- arch/arm/mach-omap2/prm3xxx.c | 2 +- arch/arm/mach-omap2/prm44xx.c | 2 +- arch/arm/mach-omap2/timer.c | 2 +- arch/arm/mach-omap2/voltage.c | 2 +- include/linux/power/omap/powerdomain.h | 280 ++++++++++++++++++++++ 34 files changed, 312 insertions(+), 309 deletions(-) delete mode 100644 arch/arm/mach-omap2/powerdomain.h create mode 100644 include/linux/power/omap/powerdomain.h