@@ -58,12 +58,10 @@ qmp_block_job_finalize(void *job) "job %p"
qmp_block_job_dismiss(void *job) "job %p"
qmp_block_stream(void *bs) "bs %p"
-# file-posix.c
# file-win32.c
file_paio_submit(void *acb, void *opaque, int64_t offset, int count, int type) "acb %p opaque %p offset %"PRId64" count %d type %d"
-file_copy_file_range(void *bs, int src, int64_t src_off, int dst, int64_t dst_off, int64_t bytes, int flags, int64_t ret) "bs %p src_fd %d offset %"PRIu64" dst_fd %d offset %"PRIu64" bytes %"PRIu64" flags %d ret %"PRId64
-#io_uring.c
+# io_uring.c
luring_init_state(void *s, size_t size) "s %p size %zu"
luring_cleanup_state(void *s) "%p freed"
luring_io_plug(void *s) "LuringState %p plug"
@@ -199,6 +197,7 @@ curl_setup_preadv(uint64_t bytes, uint64_t start, const char *range) "reading %"
curl_close(void) "close"
# file-posix.c
+file_copy_file_range(void *bs, int src, int64_t src_off, int dst, int64_t dst_off, int64_t bytes, int flags, int64_t ret) "bs %p src_fd %d offset %"PRIu64" dst_fd %d offset %"PRIu64" bytes %"PRIu64" flags %d ret %"PRId64
file_FindEjectableOpticalMedia(const char *media) "Matching using %s"
file_setup_cdrom(const char *partition) "Using %s as optical disc"
file_hdev_is_sg(int type, int version) "SG device found: type=%d, version=%d"
@@ -4,8 +4,8 @@
fdc_ioport_read(uint8_t reg, uint8_t value) "read reg 0x%02x val 0x%02x"
fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x"
-# pflash_cfi02.c
# pflash_cfi01.c
+# pflash_cfi02.c
pflash_reset(void) "reset"
pflash_timer_expired(uint8_t cmd) "command 0x%02x done"
pflash_io_read(uint64_t offset, unsigned size, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x cmd:0x%02x wcycle:%u"
@@ -98,5 +98,5 @@ exynos_uart_rxsize(uint32_t channel, uint32_t size) "UART%d: Rx FIFO size: %d"
exynos_uart_channel_error(uint32_t channel) "Wrong UART channel number: %d"
exynos_uart_rx_timeout(uint32_t channel, uint32_t stat, uint32_t intsp) "UART%d: Rx timeout stat=0x%x intsp=0x%x"
-# hw/char/cadence_uart.c
+# cadence_uart.c
cadence_uart_baudrate(unsigned baudrate) "baudrate %u"
@@ -32,9 +32,11 @@ vmware_scratch_read(uint32_t index, uint32_t value) "index %d, value 0x%x"
vmware_scratch_write(uint32_t index, uint32_t value) "index %d, value 0x%x"
vmware_setmode(uint32_t w, uint32_t h, uint32_t bpp) "%dx%d @ %d bpp"
+# virtio-gpu-base.c
+virtio_gpu_features(bool virgl) "virgl %d"
+
# virtio-gpu-3d.c
# virtio-gpu.c
-virtio_gpu_features(bool virgl) "virgl %d"
virtio_gpu_cmd_get_display_info(void) ""
virtio_gpu_cmd_get_edid(uint32_t scanout) "scanout %d"
virtio_gpu_cmd_set_scanout(uint32_t id, uint32_t res, uint32_t w, uint32_t h, uint32_t x, uint32_t y) "id %d, res 0x%x, w %d, h %d, x %d, y %d"
@@ -1,4 +1,4 @@
-# vmbus
+# vmbus.c
vmbus_recv_message(uint32_t type, uint32_t size) "type %d size %d"
vmbus_signal_event(void) ""
vmbus_channel_notify_guest(uint32_t chan_id) "channel #%d"
@@ -1,4 +1,4 @@
-# gt64xxx.c
+# gt64xxx_pci.c
gt64120_read(const char *regname, unsigned size, uint64_t value) "gt64120 read %s size:%u value:0x%08" PRIx64
gt64120_write(const char *regname, unsigned size, uint64_t value) "gt64120 write %s size:%u value:0x%08" PRIx64
gt64120_isd_remap(uint64_t from_length, uint64_t from_addr, uint64_t to_length, uint64_t to_addr) "ISD: 0x%08" PRIx64 "@0x%08" PRIx64 " -> 0x%08" PRIx64 "@0x%08" PRIx64
@@ -110,13 +110,13 @@ mos6522_set_sr_int(void) "set sr_int"
mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64
mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x"
-# stm32f4xx_syscfg
+# stm32f4xx_syscfg.c
stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d"
stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d"
stm32f4xx_syscfg_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " "
stm32f4xx_syscfg_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
-# stm32f4xx_exti
+# stm32f4xx_exti.c
stm32f4xx_exti_set_irq(int irq, int leve) "Set EXTI: %d to %d"
stm32f4xx_exti_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " "
stm32f4xx_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
@@ -181,11 +181,13 @@ armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU wri
# aspeed_xdma.c
aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64
+# bcm2835_property.c
+bcm2835_mbox_property(uint32_t tag, uint32_t bufsize, size_t resplen) "mbox property tag:0x%08x in_sz:%u out_sz:%zu"
+
# bcm2835_mbox.c
bcm2835_mbox_write(unsigned int size, uint64_t addr, uint64_t value) "mbox write sz:%u addr:0x%"PRIx64" data:0x%"PRIx64
bcm2835_mbox_read(unsigned int size, uint64_t addr, uint64_t value) "mbox read sz:%u addr:0x%"PRIx64" data:0x%"PRIx64
bcm2835_mbox_irq(unsigned level) "mbox irq:ARM level:%u"
-bcm2835_mbox_property(uint32_t tag, uint32_t bufsize, size_t resplen) "mbox property tag:0x%08x in_sz:%u out_sz:%zu"
# mac_via.c
via1_rtc_update_data_out(int count, int value) "count=%d value=0x%02x"
@@ -9,10 +9,8 @@ spapr_pci_msi_write(uint64_t addr, uint64_t data, uint32_t dt_irq) "@0x%"PRIx64"
spapr_pci_lsi_set(const char *busname, int pin, uint32_t irq) "%s PIN%d IRQ %u"
spapr_pci_msi_retry(unsigned config_addr, unsigned req_num, unsigned max_irqs) "Guest device at 0x%x asked %u, have only %u"
-# spapr.c
-spapr_cas_continue(unsigned long n) "Copy changes to the guest: %ld bytes"
-
# spapr_hcall.c
+spapr_cas_continue(unsigned long n) "Copy changes to the guest: %ld bytes"
spapr_cas_pvr(uint32_t cur_pvr, bool explicit_match, uint32_t new_pvr) "current=0x%x, explicit_match=%u, new=0x%x"
spapr_h_resize_hpt_prepare(uint64_t flags, uint64_t shift) "flags=0x%"PRIx64", shift=%"PRIu64
spapr_h_resize_hpt_commit(uint64_t flags, uint64_t shift) "flags=0x%"PRIx64", shift=%"PRIu64
@@ -20,7 +18,7 @@ spapr_update_dt(unsigned cb) "New blob %u bytes"
spapr_update_dt_failed_size(unsigned cbold, unsigned cbnew, unsigned magic) "Old blob %u bytes, new blob %u bytes, magic 0x%x"
spapr_update_dt_failed_check(unsigned cbold, unsigned cbnew, unsigned magic) "Old blob %u bytes, new blob %u bytes, magic 0x%x"
-# spapr_hcall_tpm.c
+# spapr_tpm_proxy.c
spapr_h_tpm_comm(const char *device_path, uint64_t operation) "tpm_device_path=%s operation=0x%"PRIu64
spapr_tpm_execute(uint64_t data_in, uint64_t data_in_sz, uint64_t data_out, uint64_t data_out_sz) "data_in=0x%"PRIx64", data_in_sz=%"PRIu64", data_out=0x%"PRIx64", data_out_sz=%"PRIu64
@@ -1,6 +1,6 @@
# See docs/devel/tracing.txt for syntax documentation.
-# hw/gpio/sifive_gpio.c
+# sifive_gpio.c
sifive_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64
sifive_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64
sifive_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64
@@ -18,7 +18,7 @@ pl031_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
pl031_alarm_raised(void) "alarm raised"
pl031_set_alarm(uint32_t ticks) "alarm set for %u ticks"
-# aspeed-rtc.c
+# aspeed_rtc.c
aspeed_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64
aspeed_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64
@@ -4,7 +4,7 @@
tpm_crb_mmio_read(uint64_t addr, unsigned size, uint32_t val) "CRB read 0x%016" PRIx64 " len:%u val: 0x%" PRIx32
tpm_crb_mmio_write(uint64_t addr, unsigned size, uint32_t val) "CRB write 0x%016" PRIx64 " len:%u val: 0x%" PRIx32
-# tpm_tis.c
+# tpm_tis_common.c
tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x"
tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d"
tpm_tis_abort(uint8_t locty) "New active locality is %d"
@@ -10,6 +10,9 @@ usb_port_attach(int bus, const char *port, const char *devspeed, const char *por
usb_port_detach(int bus, const char *port) "bus %d, port %s"
usb_port_release(int bus, const char *port) "bus %d, port %s"
+# hcd-ohci-pci.c
+usb_ohci_exit(const char *s) "%s"
+
# hcd-ohci.c
usb_ohci_iso_td_read_failed(uint32_t addr) "ISO_TD read error at 0x%x"
usb_ohci_iso_td_head(uint32_t head, uint32_t tail, uint32_t flags, uint32_t bp, uint32_t next, uint32_t be, uint32_t framenum, uint32_t startframe, uint32_t framecount, int rel_frame_num) "ISO_TD ED head 0x%.8x tailp 0x%.8x\n0x%.8x 0x%.8x 0x%.8x 0x%.8x\nframe_number 0x%.8x starting_frame 0x%.8x\nframe_count 0x%.8x relative %d"
@@ -35,7 +38,6 @@ usb_ohci_reset(const char *s) "%s"
usb_ohci_start(const char *s) "%s: USB Operational"
usb_ohci_resume(const char *s) "%s: USB Resume"
usb_ohci_stop(const char *s) "%s: USB Suspended"
-usb_ohci_exit(const char *s) "%s"
usb_ohci_set_ctl(const char *s, uint32_t new_state) "%s: new state 0x%x"
usb_ohci_td_underrun(void) ""
usb_ohci_td_dev_error(void) ""
@@ -80,16 +80,18 @@ vfio_quirk_ati_bonaire_reset(const char *name) "%s"
vfio_ioeventfd_exit(const char *name, uint64_t addr, unsigned size, uint64_t data) "%s+0x%"PRIx64"[%d]:0x%"PRIx64
vfio_ioeventfd_handler(const char *name, uint64_t addr, unsigned size, uint64_t data) "%s+0x%"PRIx64"[%d] -> 0x%"PRIx64
vfio_ioeventfd_init(const char *name, uint64_t addr, unsigned size, uint64_t data, bool vfio) "%s+0x%"PRIx64"[%d]:0x%"PRIx64" vfio:%d"
-vfio_pci_igd_bar4_write(const char *name, uint32_t index, uint32_t data, uint32_t base) "%s [0x%03x] 0x%08x -> 0x%08x"
-vfio_pci_igd_bdsm_enabled(const char *name, int size) "%s %dMB"
vfio_pci_igd_opregion_enabled(const char *name) "%s"
-vfio_pci_igd_host_bridge_enabled(const char *name) "%s"
-vfio_pci_igd_lpc_bridge_enabled(const char *name) "%s"
vfio_pci_nvidia_gpu_setup_quirk(const char *name, uint64_t tgt, uint64_t size) "%s tgt=0x%"PRIx64" size=0x%"PRIx64
vfio_pci_nvlink2_setup_quirk_ssatgt(const char *name, uint64_t tgt, uint64_t size) "%s tgt=0x%"PRIx64" size=0x%"PRIx64
vfio_pci_nvlink2_setup_quirk_lnkspd(const char *name, uint32_t link_speed) "%s link_speed=0x%x"
+# igd.c
+vfio_pci_igd_bar4_write(const char *name, uint32_t index, uint32_t data, uint32_t base) "%s [0x%03x] 0x%08x -> 0x%08x"
+vfio_pci_igd_bdsm_enabled(const char *name, int size) "%s %dMB"
+vfio_pci_igd_host_bridge_enabled(const char *name) "%s"
+vfio_pci_igd_lpc_bridge_enabled(const char *name) "%s"
+
# common.c
vfio_region_write(const char *name, int index, uint64_t addr, uint64_t data, unsigned size) " (%s:region%d+0x%"PRIx64", 0x%"PRIx64 ", %d)"
vfio_region_read(char *name, int index, uint64_t addr, unsigned size, uint64_t data) " (%s:region%d+0x%"PRIx64", %d) = 0x%"PRIx64
@@ -55,7 +55,7 @@ virtio_mmio_guest_page(uint64_t size, int shift) "guest page size 0x%" PRIx64 "
virtio_mmio_queue_write(uint64_t value, int max_size) "mmio_queue write 0x%" PRIx64 " max %d"
virtio_mmio_setting_irq(int level) "virtio_mmio setting IRQ %d"
-# hw/virtio/virtio-iommu.c
+# virtio-iommu.c
virtio_iommu_device_reset(void) "reset!"
virtio_iommu_get_features(uint64_t features) "device supports features=0x%"PRIx64
virtio_iommu_device_status(uint8_t status) "driver status = %d"
@@ -91,23 +91,6 @@ migration_bitmap_sync_start(void) ""
migration_bitmap_sync_end(uint64_t dirty_pages) "dirty_pages %" PRIu64
migration_bitmap_clear_dirty(char *str, uint64_t start, uint64_t size, unsigned long page) "rb %s start 0x%"PRIx64" size 0x%"PRIx64" page 0x%lx"
migration_throttle(void) ""
-multifd_new_send_channel_async(uint8_t id) "channel %d"
-multifd_recv(uint8_t id, uint64_t packet_num, uint32_t used, uint32_t flags, uint32_t next_packet_size) "channel %d packet_num %" PRIu64 " pages %d flags 0x%x next packet size %d"
-multifd_recv_new_channel(uint8_t id) "channel %d"
-multifd_recv_sync_main(long packet_num) "packet num %ld"
-multifd_recv_sync_main_signal(uint8_t id) "channel %d"
-multifd_recv_sync_main_wait(uint8_t id) "channel %d"
-multifd_recv_terminate_threads(bool error) "error %d"
-multifd_recv_thread_end(uint8_t id, uint64_t packets, uint64_t pages) "channel %d packets %" PRIu64 " pages %" PRIu64
-multifd_recv_thread_start(uint8_t id) "%d"
-multifd_send(uint8_t id, uint64_t packet_num, uint32_t used, uint32_t flags, uint32_t next_packet_size) "channel %d packet_num %" PRIu64 " pages %d flags 0x%x next packet size %d"
-multifd_send_error(uint8_t id) "channel %d"
-multifd_send_sync_main(long packet_num) "packet num %ld"
-multifd_send_sync_main_signal(uint8_t id) "channel %d"
-multifd_send_sync_main_wait(uint8_t id) "channel %d"
-multifd_send_terminate_threads(bool error) "error %d"
-multifd_send_thread_end(uint8_t id, uint64_t packets, uint64_t pages) "channel %d packets %" PRIu64 " pages %" PRIu64
-multifd_send_thread_start(uint8_t id) "%d"
ram_discard_range(const char *rbname, uint64_t start, size_t len) "%s: start: %" PRIx64 " %zx"
ram_load_loop(const char *rbname, uint64_t addr, int flags, void *host) "%s: addr: 0x%" PRIx64 " flags: 0x%x host: %p"
ram_load_postcopy_loop(uint64_t addr, int flags) "@%" PRIx64 " %x"
@@ -128,6 +111,25 @@ save_xbzrle_page_overflow(void) ""
ram_save_iterate_big_wait(uint64_t milliconds, int iterations) "big wait: %" PRIu64 " milliseconds, %d iterations"
ram_load_complete(int ret, uint64_t seq_iter) "exit_code %d seq iteration %" PRIu64
+# multifd.c
+multifd_new_send_channel_async(uint8_t id) "channel %d"
+multifd_recv(uint8_t id, uint64_t packet_num, uint32_t used, uint32_t flags, uint32_t next_packet_size) "channel %d packet_num %" PRIu64 " pages %d flags 0x%x next packet size %d"
+multifd_recv_new_channel(uint8_t id) "channel %d"
+multifd_recv_sync_main(long packet_num) "packet num %ld"
+multifd_recv_sync_main_signal(uint8_t id) "channel %d"
+multifd_recv_sync_main_wait(uint8_t id) "channel %d"
+multifd_recv_terminate_threads(bool error) "error %d"
+multifd_recv_thread_end(uint8_t id, uint64_t packets, uint64_t pages) "channel %d packets %" PRIu64 " pages %" PRIu64
+multifd_recv_thread_start(uint8_t id) "%d"
+multifd_send(uint8_t id, uint64_t packet_num, uint32_t used, uint32_t flags, uint32_t next_packet_size) "channel %d packet_num %" PRIu64 " pages %d flags 0x%x next packet size %d"
+multifd_send_error(uint8_t id) "channel %d"
+multifd_send_sync_main(long packet_num) "packet num %ld"
+multifd_send_sync_main_signal(uint8_t id) "channel %d"
+multifd_send_sync_main_wait(uint8_t id) "channel %d"
+multifd_send_terminate_threads(bool error) "error %d"
+multifd_send_thread_end(uint8_t id, uint64_t packets, uint64_t pages) "channel %d packets %" PRIu64 " pages %" PRIu64
+multifd_send_thread_start(uint8_t id) "%d"
+
# migration.c
await_return_path_close_on_source_close(void) ""
await_return_path_close_on_source_joining(void) ""
@@ -1,4 +1,4 @@
-# target/riscv/cpu_helper.c
+# cpu_helper.c
riscv_trap(uint64_t hartid, bool async, uint64_t cause, uint64_t epc, uint64_t tval, const char *desc) "hart:%"PRId64", async:%d, cause:%"PRId64", epc:0x%"PRIx64", tval:0x%"PRIx64", desc=%s"
# pmp.c
@@ -36,6 +36,8 @@ dma_map_wait(void *dbs) "dbs=%p"
find_ram_offset(uint64_t size, uint64_t offset) "size: 0x%" PRIx64 " @ 0x%" PRIx64
find_ram_offset_loop(uint64_t size, uint64_t candidate, uint64_t offset, uint64_t next, uint64_t mingap) "trying size: 0x%" PRIx64 " @ 0x%" PRIx64 ", offset: 0x%" PRIx64" next: 0x%" PRIx64 " mingap: 0x%" PRIx64
ram_block_discard_range(const char *rbname, void *hva, size_t length, bool need_madvise, bool need_fallocate, int ret) "%s@%p + 0x%zx: madvise: %d fallocate: %d ret: %d"
+
+# accel/tcg/cputlb.c
memory_notdirty_write_access(uint64_t vaddr, uint64_t ram_addr, unsigned size) "0x%" PRIx64 " ram_addr 0x%" PRIx64 " size %u"
memory_notdirty_set_dirty(uint64_t vaddr) "0x%" PRIx64
@@ -134,8 +136,7 @@ vcpu guest_cpu_reset(void)
# Targets: TCG(all)
vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
-# linux-user/syscall.c
-# bsd-user/syscall.c
+# include/user/syscall-trace.h
# @num: System call number.
# @arg*: System call argument value.
@@ -17,9 +17,9 @@ displaychangelistener_register(void *dcl, const char *name) "%p [ %s ]"
displaychangelistener_unregister(void *dcl, const char *name) "%p [ %s ]"
ppm_save(int fd, void *display_surface) "fd=%d surface=%p"
-# gtk.c
-# gtk-gl-area.c
# gtk-egl.c
+# gtk-gl-area.c
+# gtk.c
gd_switch(const char *tab, int width, int height) "tab=%s, width=%d, height=%d"
gd_update(const char *tab, int x, int y, int w, int h) "tab=%s, x=%d, y=%d, w=%d, h=%d"
gd_key_event(const char *tab, int gdk_keycode, int qkeycode, const char *action) "tab=%s, translated GDK keycode %d to QKeyCode %d (%s)"
@@ -28,8 +28,8 @@ gd_ungrab(const char *tab, const char *device) "tab=%s, dev=%s"
gd_keymap_windowing(const char *name) "backend=%s"
# vnc-auth-sasl.c
-# vnc-ws.c
# vnc-auth-vencrypt.c
+# vnc-ws.c
# vnc.c
vnc_key_guest_leds(bool caps, bool num, bool scroll) "caps %d, num %d, scroll %d"
vnc_key_map_init(const char *layout) "%s"
@@ -44,8 +44,8 @@ qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p"
qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p"
qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
-# oslib-win32.c
# oslib-posix.c
+# oslib-win32.c
qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p"
qemu_anon_ram_alloc(size_t size, void *ptr) "size %zu ptr %p"
qemu_vfree(void *ptr) "ptr %p"
@@ -70,6 +70,8 @@ lockcnt_futex_wake(const void *lockcnt) "lockcnt %p waking up one waiter"
socket_listen(int num) "backlog: %d"
# qemu-thread-common.h
+# qemu-thread-posix.c
+# qemu-thread-win32.c
qemu_mutex_lock(void *mutex, const char *file, const int line) "waiting on mutex %p (%s:%d)"
qemu_mutex_locked(void *mutex, const char *file, const int line) "taken mutex %p (%s:%d)"
qemu_mutex_unlock(void *mutex, const char *file, const int line) "released mutex %p (%s:%d)"
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of scripts/cleanup-trace-events.pl. Funnies requiring manual post-processing: * accel/tcg/cputlb.c trace points are in trace-events. * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to guard debug code. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * linux-user/trace-events abbreviates a tedious list of filenames to */signal.c. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> --- block/trace-events | 5 ++--- hw/block/trace-events | 2 +- hw/char/trace-events | 2 +- hw/display/trace-events | 4 +++- hw/hyperv/trace-events | 2 +- hw/mips/trace-events | 2 +- hw/misc/trace-events | 8 +++++--- hw/ppc/trace-events | 6 ++---- hw/riscv/trace-events | 2 +- hw/rtc/trace-events | 2 +- hw/tpm/trace-events | 2 +- hw/usb/trace-events | 4 +++- hw/vfio/trace-events | 10 ++++++---- hw/virtio/trace-events | 2 +- migration/trace-events | 36 +++++++++++++++++++----------------- target/riscv/trace-events | 2 +- trace-events | 5 +++-- ui/trace-events | 6 +++--- util/trace-events | 4 +++- 19 files changed, 58 insertions(+), 48 deletions(-)