Message ID | 1397801156-25682-3-git-send-email-haojian.zhuang@linaro.org |
---|---|
State | Changes Requested |
Headers | show |
Hi Haojian, On 18/04/2014 08:05, Haojian Zhuang wrote: > Add new ARCH_MULTI_V7_LPAE config. It will select ARM_LPAE only both > ARCH_MULTI_V6 & ARCH_MULTI_V7 is disabled. > > ARCH_MULTI_V7 means non-LPAE platform. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > --- > arch/arm/Kconfig | 9 ++++++++- > arch/arm/mach-berlin/Kconfig | 2 +- > arch/arm/mach-highbank/Kconfig | 2 +- > arch/arm/mach-mvebu/Kconfig | 6 +++--- > arch/arm/mach-omap2/Kconfig | 4 ++-- > arch/arm/mach-qcom/Kconfig | 2 +- > arch/arm/mach-shmobile/Kconfig | 2 +- > arch/arm/mach-tegra/Kconfig | 2 +- > arch/arm/mach-vexpress/Kconfig | 2 +- > 9 files changed, 19 insertions(+), 12 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index ab438cb..9a2214e 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -918,12 +918,19 @@ config ARCH_MULTI_V6 > select CPU_V6K > > config ARCH_MULTI_V7 > - bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" > + bool "ARMv7 non-LPAE based platforms (Cortex-A5/A8/A9, PJ4, Scorpion)" Actually some PJ4B are also non LPAE capable > default y > select ARCH_MULTI_V6_V7 > select CPU_V7 > select HAVE_SMP > > +config ARCH_MULTI_V7_LPAE > + bool "ARMv7 LPAE based platforms (Cortex-A7/A12/A15/A17, Brahma-B15, PJ4B, Krait)" Only Armada XP is LPAE capable, and and the CPU is not a "simple" PJ4B but a PJ4B-MP > + select ARCH_MULTI_V6_V7 > + select CPU_V7 > + select HAVE_SMP > + select ARM_LPAE if !(ARCH_MULTI_V6 || ARCH_MULTI_V7) > + > config ARCH_MULTI_V6_V7 > bool > select MIGHT_HAVE_CACHE_L2X0 > diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig > index b0cb072..be0512d 100644 > --- a/arch/arm/mach-berlin/Kconfig > +++ b/arch/arm/mach-berlin/Kconfig > @@ -1,5 +1,5 @@ > config ARCH_BERLIN > - bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 > + bool "Marvell Berlin SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE) > select ARM_GIC > select GENERIC_IRQ_CHIP > select DW_APB_ICTL > diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig > index 830b76e..9b6b3f8 100644 > --- a/arch/arm/mach-highbank/Kconfig > +++ b/arch/arm/mach-highbank/Kconfig > @@ -1,5 +1,5 @@ > config ARCH_HIGHBANK > - bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 > + bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7_LPAE > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > select ARCH_HAS_CPUFREQ > select ARCH_HAS_HOLES_MEMORYMODEL > diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig > index 3f73eec..16f69ae 100644 > --- a/arch/arm/mach-mvebu/Kconfig > +++ b/arch/arm/mach-mvebu/Kconfig > @@ -1,5 +1,5 @@ > config ARCH_MVEBU > - bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) > + bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE || ARCH_MULTI_V5) > select ARCH_SUPPORTS_BIG_ENDIAN > select CLKSRC_MMIO > select GENERIC_IRQ_CHIP > @@ -23,7 +23,7 @@ config MACH_MVEBU_V7 > select CACHE_L2X0 > > config MACH_ARMADA_370 > - bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 > + bool "Marvell Armada 370 boards" if ARCH_MULTI_V7_LPAE Armada 370 is not LPAE capable > select ARMADA_370_CLK > select CPU_PJ4B > select MACH_MVEBU_V7 > @@ -59,7 +59,7 @@ config MACH_ARMADA_38X > on the Marvell Armada 380/385 SoC with device tree. > > config MACH_ARMADA_XP > - bool "Marvell Armada XP boards" if ARCH_MULTI_V7 > + bool "Marvell Armada XP boards" if ARCH_MULTI_V7_LPAE > select ARMADA_XP_CLK > select CPU_PJ4B > select MACH_MVEBU_V7 Thanks, Gregory
On 18 April 2014 14:56, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote: > Hi Haojian, > > On 18/04/2014 08:05, Haojian Zhuang wrote: >> Add new ARCH_MULTI_V7_LPAE config. It will select ARM_LPAE only both >> ARCH_MULTI_V6 & ARCH_MULTI_V7 is disabled. >> >> ARCH_MULTI_V7 means non-LPAE platform. >> >> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> >> --- >> arch/arm/Kconfig | 9 ++++++++- >> arch/arm/mach-berlin/Kconfig | 2 +- >> arch/arm/mach-highbank/Kconfig | 2 +- >> arch/arm/mach-mvebu/Kconfig | 6 +++--- >> arch/arm/mach-omap2/Kconfig | 4 ++-- >> arch/arm/mach-qcom/Kconfig | 2 +- >> arch/arm/mach-shmobile/Kconfig | 2 +- >> arch/arm/mach-tegra/Kconfig | 2 +- >> arch/arm/mach-vexpress/Kconfig | 2 +- >> 9 files changed, 19 insertions(+), 12 deletions(-) >> >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >> index ab438cb..9a2214e 100644 >> --- a/arch/arm/Kconfig >> +++ b/arch/arm/Kconfig >> @@ -918,12 +918,19 @@ config ARCH_MULTI_V6 >> select CPU_V6K >> >> config ARCH_MULTI_V7 >> - bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" >> + bool "ARMv7 non-LPAE based platforms (Cortex-A5/A8/A9, PJ4, Scorpion)" > Actually some PJ4B are also non LPAE capable > > >> default y >> select ARCH_MULTI_V6_V7 >> select CPU_V7 >> select HAVE_SMP >> >> +config ARCH_MULTI_V7_LPAE >> + bool "ARMv7 LPAE based platforms (Cortex-A7/A12/A15/A17, Brahma-B15, PJ4B, Krait)" > Only Armada XP is LPAE capable, and and the CPU is not a "simple" PJ4B > but a PJ4B-MP Do you mind that I append CPU_PJ4B_MP? >> >> config MACH_ARMADA_370 >> - bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 >> + bool "Marvell Armada 370 boards" if ARCH_MULTI_V7_LPAE > Armada 370 is not LPAE capable > >> select ARMADA_370_CLK >> select CPU_PJ4B >> select MACH_MVEBU_V7 >> @@ -59,7 +59,7 @@ config MACH_ARMADA_38X >> on the Marvell Armada 380/385 SoC with device tree. >> >> config MACH_ARMADA_XP >> - bool "Marvell Armada XP boards" if ARCH_MULTI_V7 >> + bool "Marvell Armada XP boards" if ARCH_MULTI_V7_LPAE >> select ARMADA_XP_CLK >> select CPU_PJ4B >> select MACH_MVEBU_V7 > > > Thanks, > > Gregory > > > -- > Gregory Clement, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com
On 18/04/2014 09:08, Haojian Zhuang wrote: > On 18 April 2014 14:56, Gregory CLEMENT > <gregory.clement@free-electrons.com> wrote: >> Hi Haojian, >> >> On 18/04/2014 08:05, Haojian Zhuang wrote: >>> Add new ARCH_MULTI_V7_LPAE config. It will select ARM_LPAE only both >>> ARCH_MULTI_V6 & ARCH_MULTI_V7 is disabled. >>> >>> ARCH_MULTI_V7 means non-LPAE platform. >>> >>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> >>> --- >>> arch/arm/Kconfig | 9 ++++++++- >>> arch/arm/mach-berlin/Kconfig | 2 +- >>> arch/arm/mach-highbank/Kconfig | 2 +- >>> arch/arm/mach-mvebu/Kconfig | 6 +++--- >>> arch/arm/mach-omap2/Kconfig | 4 ++-- >>> arch/arm/mach-qcom/Kconfig | 2 +- >>> arch/arm/mach-shmobile/Kconfig | 2 +- >>> arch/arm/mach-tegra/Kconfig | 2 +- >>> arch/arm/mach-vexpress/Kconfig | 2 +- >>> 9 files changed, 19 insertions(+), 12 deletions(-) >>> >>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >>> index ab438cb..9a2214e 100644 >>> --- a/arch/arm/Kconfig >>> +++ b/arch/arm/Kconfig >>> @@ -918,12 +918,19 @@ config ARCH_MULTI_V6 >>> select CPU_V6K >>> >>> config ARCH_MULTI_V7 >>> - bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" >>> + bool "ARMv7 non-LPAE based platforms (Cortex-A5/A8/A9, PJ4, Scorpion)" >> Actually some PJ4B are also non LPAE capable >> >> >>> default y >>> select ARCH_MULTI_V6_V7 >>> select CPU_V7 >>> select HAVE_SMP >>> >>> +config ARCH_MULTI_V7_LPAE >>> + bool "ARMv7 LPAE based platforms (Cortex-A7/A12/A15/A17, Brahma-B15, PJ4B, Krait)" >> Only Armada XP is LPAE capable, and and the CPU is not a "simple" PJ4B >> but a PJ4B-MP > > Do you mind that I append CPU_PJ4B_MP? Currently we make no difference in the code between PJ4B and PJ4B-MP. Moreover the ARCH_MULTI_V7_LPAE vs ARCH_MULTI_V7 si done by SoC not by CPU. Maybe I missed something, what is your proposal? > >>> >>> config MACH_ARMADA_370 >>> - bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 >>> + bool "Marvell Armada 370 boards" if ARCH_MULTI_V7_LPAE >> Armada 370 is not LPAE capable >> >>> select ARMADA_370_CLK >>> select CPU_PJ4B >>> select MACH_MVEBU_V7 >>> @@ -59,7 +59,7 @@ config MACH_ARMADA_38X >>> on the Marvell Armada 380/385 SoC with device tree. >>> >>> config MACH_ARMADA_XP >>> - bool "Marvell Armada XP boards" if ARCH_MULTI_V7 >>> + bool "Marvell Armada XP boards" if ARCH_MULTI_V7_LPAE >>> select ARMADA_XP_CLK >>> select CPU_PJ4B >>> select MACH_MVEBU_V7 >> >> >> Thanks, >> >> Gregory >> >> >> -- >> Gregory Clement, Free Electrons >> Kernel, drivers, real-time and embedded Linux >> development, consulting, training and support. >> http://free-electrons.com
On 18 April 2014 15:18, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote: > On 18/04/2014 09:08, Haojian Zhuang wrote: >> On 18 April 2014 14:56, Gregory CLEMENT >> <gregory.clement@free-electrons.com> wrote: >>> Hi Haojian, >>> >>> On 18/04/2014 08:05, Haojian Zhuang wrote: >>>> Add new ARCH_MULTI_V7_LPAE config. It will select ARM_LPAE only both >>>> ARCH_MULTI_V6 & ARCH_MULTI_V7 is disabled. >>>> >>>> ARCH_MULTI_V7 means non-LPAE platform. >>>> >>>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> >>>> --- >>>> arch/arm/Kconfig | 9 ++++++++- >>>> arch/arm/mach-berlin/Kconfig | 2 +- >>>> arch/arm/mach-highbank/Kconfig | 2 +- >>>> arch/arm/mach-mvebu/Kconfig | 6 +++--- >>>> arch/arm/mach-omap2/Kconfig | 4 ++-- >>>> arch/arm/mach-qcom/Kconfig | 2 +- >>>> arch/arm/mach-shmobile/Kconfig | 2 +- >>>> arch/arm/mach-tegra/Kconfig | 2 +- >>>> arch/arm/mach-vexpress/Kconfig | 2 +- >>>> 9 files changed, 19 insertions(+), 12 deletions(-) >>>> >>>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >>>> index ab438cb..9a2214e 100644 >>>> --- a/arch/arm/Kconfig >>>> +++ b/arch/arm/Kconfig >>>> @@ -918,12 +918,19 @@ config ARCH_MULTI_V6 >>>> select CPU_V6K >>>> >>>> config ARCH_MULTI_V7 >>>> - bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" >>>> + bool "ARMv7 non-LPAE based platforms (Cortex-A5/A8/A9, PJ4, Scorpion)" >>> Actually some PJ4B are also non LPAE capable >>> >>> >>>> default y >>>> select ARCH_MULTI_V6_V7 >>>> select CPU_V7 >>>> select HAVE_SMP >>>> >>>> +config ARCH_MULTI_V7_LPAE >>>> + bool "ARMv7 LPAE based platforms (Cortex-A7/A12/A15/A17, Brahma-B15, PJ4B, Krait)" >>> Only Armada XP is LPAE capable, and and the CPU is not a "simple" PJ4B >>> but a PJ4B-MP >> >> Do you mind that I append CPU_PJ4B_MP? > > Currently we make no difference in the code between PJ4B and PJ4B-MP. > Moreover the ARCH_MULTI_V7_LPAE vs ARCH_MULTI_V7 si done by SoC not by > CPU. > > Maybe I missed something, what is your proposal? > Since they're same between PJ4B & PJ4B-MP, I shouldn't append a new PJ4B_MP. I'll only use both ARCH_MULTI_V7 & ARCH_MULTI_V7_LPAE as the precondition on ARMADA_XP. I'll keep ARCH_MULTI_V7 as the precondition on other armada chips in mach-berlin directory. So when multi_v7_lpae_defconfig is appended, only ARMADA_XP is built from mach-berlin directory. Is it OK? Regards Haojian
On 18/04/2014 09:40, Haojian Zhuang wrote: > On 18 April 2014 15:18, Gregory CLEMENT > <gregory.clement@free-electrons.com> wrote: >> On 18/04/2014 09:08, Haojian Zhuang wrote: >>> On 18 April 2014 14:56, Gregory CLEMENT >>> <gregory.clement@free-electrons.com> wrote: >>>> Hi Haojian, >>>> >>>> On 18/04/2014 08:05, Haojian Zhuang wrote: >>>>> Add new ARCH_MULTI_V7_LPAE config. It will select ARM_LPAE only both >>>>> ARCH_MULTI_V6 & ARCH_MULTI_V7 is disabled. >>>>> >>>>> ARCH_MULTI_V7 means non-LPAE platform. >>>>> >>>>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> >>>>> --- >>>>> arch/arm/Kconfig | 9 ++++++++- >>>>> arch/arm/mach-berlin/Kconfig | 2 +- >>>>> arch/arm/mach-highbank/Kconfig | 2 +- >>>>> arch/arm/mach-mvebu/Kconfig | 6 +++--- >>>>> arch/arm/mach-omap2/Kconfig | 4 ++-- >>>>> arch/arm/mach-qcom/Kconfig | 2 +- >>>>> arch/arm/mach-shmobile/Kconfig | 2 +- >>>>> arch/arm/mach-tegra/Kconfig | 2 +- >>>>> arch/arm/mach-vexpress/Kconfig | 2 +- >>>>> 9 files changed, 19 insertions(+), 12 deletions(-) >>>>> >>>>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >>>>> index ab438cb..9a2214e 100644 >>>>> --- a/arch/arm/Kconfig >>>>> +++ b/arch/arm/Kconfig >>>>> @@ -918,12 +918,19 @@ config ARCH_MULTI_V6 >>>>> select CPU_V6K >>>>> >>>>> config ARCH_MULTI_V7 >>>>> - bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" >>>>> + bool "ARMv7 non-LPAE based platforms (Cortex-A5/A8/A9, PJ4, Scorpion)" >>>> Actually some PJ4B are also non LPAE capable >>>> >>>> >>>>> default y >>>>> select ARCH_MULTI_V6_V7 >>>>> select CPU_V7 >>>>> select HAVE_SMP >>>>> >>>>> +config ARCH_MULTI_V7_LPAE >>>>> + bool "ARMv7 LPAE based platforms (Cortex-A7/A12/A15/A17, Brahma-B15, PJ4B, Krait)" >>>> Only Armada XP is LPAE capable, and and the CPU is not a "simple" PJ4B >>>> but a PJ4B-MP >>> >>> Do you mind that I append CPU_PJ4B_MP? >> >> Currently we make no difference in the code between PJ4B and PJ4B-MP. >> Moreover the ARCH_MULTI_V7_LPAE vs ARCH_MULTI_V7 si done by SoC not by >> CPU. >> >> Maybe I missed something, what is your proposal? >> > > Since they're same between PJ4B & PJ4B-MP, I shouldn't append a new PJ4B_MP. > > I'll only use both ARCH_MULTI_V7 & ARCH_MULTI_V7_LPAE as the > precondition on ARMADA_XP. I'll keep ARCH_MULTI_V7 as the precondition > on other armada chips in mach-berlin directory. In mach-mvebu actually > > So when multi_v7_lpae_defconfig is appended, only ARMADA_XP is built > from mach-berlin directory. Is it OK? ARMADA_XP is in mach-mvebu directory, but beside this typo I am OK :) By the way I am really happy to have the possibility to build now a multi_v7_lpae image. Thanks, Gregory > > Regards > Haojian >
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ab438cb..9a2214e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -918,12 +918,19 @@ config ARCH_MULTI_V6 select CPU_V6K config ARCH_MULTI_V7 - bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" + bool "ARMv7 non-LPAE based platforms (Cortex-A5/A8/A9, PJ4, Scorpion)" default y select ARCH_MULTI_V6_V7 select CPU_V7 select HAVE_SMP +config ARCH_MULTI_V7_LPAE + bool "ARMv7 LPAE based platforms (Cortex-A7/A12/A15/A17, Brahma-B15, PJ4B, Krait)" + select ARCH_MULTI_V6_V7 + select CPU_V7 + select HAVE_SMP + select ARM_LPAE if !(ARCH_MULTI_V6 || ARCH_MULTI_V7) + config ARCH_MULTI_V6_V7 bool select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index b0cb072..be0512d 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,5 +1,5 @@ config ARCH_BERLIN - bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 + bool "Marvell Berlin SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE) select ARM_GIC select GENERIC_IRQ_CHIP select DW_APB_ICTL diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 830b76e..9b6b3f8 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,5 @@ config ARCH_HIGHBANK - bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 + bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7_LPAE select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 3f73eec..16f69ae 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,5 +1,5 @@ config ARCH_MVEBU - bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) + bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select GENERIC_IRQ_CHIP @@ -23,7 +23,7 @@ config MACH_MVEBU_V7 select CACHE_L2X0 config MACH_ARMADA_370 - bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 + bool "Marvell Armada 370 boards" if ARCH_MULTI_V7_LPAE select ARMADA_370_CLK select CPU_PJ4B select MACH_MVEBU_V7 @@ -59,7 +59,7 @@ config MACH_ARMADA_38X on the Marvell Armada 380/385 SoC with device tree. config MACH_ARMADA_XP - bool "Marvell Armada XP boards" if ARCH_MULTI_V7 + bool "Marvell Armada XP boards" if ARCH_MULTI_V7_LPAE select ARMADA_XP_CLK select CPU_PJ4B select MACH_MVEBU_V7 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index cb31d43..1958791 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -41,7 +41,7 @@ config ARCH_OMAP4 config SOC_OMAP5 bool "TI OMAP5" - depends on ARCH_MULTI_V7 + depends on ARCH_MULTI_V7_LPAE select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM @@ -68,7 +68,7 @@ config SOC_AM43XX config SOC_DRA7XX bool "TI DRA7XX" - depends on ARCH_MULTI_V7 + depends on ARCH_MULTI_V7_LPAE select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index a028be2..0da77d2 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,5 +1,5 @@ config ARCH_QCOM - bool "Qualcomm Support" if ARCH_MULTI_V7 + bool "Qualcomm Support" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE) select ARCH_REQUIRE_GPIOLIB select ARM_GIC select CLKSRC_OF diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0f92ba8..c2a1fce 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -2,7 +2,7 @@ config ARCH_SHMOBILE bool config ARCH_SHMOBILE_MULTI - bool "Renesas ARM SoCs" if ARCH_MULTI_V7 + bool "Renesas ARM SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE) depends on MMU select ARCH_SHMOBILE select HAVE_ARM_SCU if SMP diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 92d660f..12e1b49 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,5 +1,5 @@ config ARCH_TEGRA - bool "NVIDIA Tegra" if ARCH_MULTI_V7 + bool "NVIDIA Tegra" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE) select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 657d52d..a1d69d1 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,5 +1,5 @@ config ARCH_VEXPRESS - bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 + bool "ARM Ltd. Versatile Express family" if (ARCH_MULTI_V7 || ARCH_MULTI_V7_LPAE) select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA
Add new ARCH_MULTI_V7_LPAE config. It will select ARM_LPAE only both ARCH_MULTI_V6 & ARCH_MULTI_V7 is disabled. ARCH_MULTI_V7 means non-LPAE platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- arch/arm/Kconfig | 9 ++++++++- arch/arm/mach-berlin/Kconfig | 2 +- arch/arm/mach-highbank/Kconfig | 2 +- arch/arm/mach-mvebu/Kconfig | 6 +++--- arch/arm/mach-omap2/Kconfig | 4 ++-- arch/arm/mach-qcom/Kconfig | 2 +- arch/arm/mach-shmobile/Kconfig | 2 +- arch/arm/mach-tegra/Kconfig | 2 +- arch/arm/mach-vexpress/Kconfig | 2 +- 9 files changed, 19 insertions(+), 12 deletions(-)