Message ID | 20201010224121.12672-15-Sergey.Semin@baikalelectronics.ru |
---|---|
State | Superseded |
Headers | show |
Series | dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema | expand |
On Sun, Oct 11, 2020 at 01:41:17AM +0300, Serge Semin wrote: > In accordance with the IP core databook the > snps,quirk-frame-length-adjustment property can be set within [0, 0x3F]. > Let's make sure the DT schema applies a correct restriction on the > property. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > --- > Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > index 36d4b8060d7c..f1e6c3dab1ff 100644 > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > @@ -226,6 +226,8 @@ properties: > length adjustment when the fladj_30mhz_sdbnd signal is invalid or > incorrect. > $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0 > + maximum: 0x3f It's fine if you add the constraints during the conversion. > > snps,rx-thr-num-pkt-prd: > description: | > -- > 2.27.0 >
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 36d4b8060d7c..f1e6c3dab1ff 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -226,6 +226,8 @@ properties: length adjustment when the fladj_30mhz_sdbnd signal is invalid or incorrect. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x3f snps,rx-thr-num-pkt-prd: description: |
In accordance with the IP core databook the snps,quirk-frame-length-adjustment property can be set within [0, 0x3F]. Let's make sure the DT schema applies a correct restriction on the property. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 2 ++ 1 file changed, 2 insertions(+)