diff mbox series

[net,5/5] bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.

Message ID 1603685901-17917-6-git-send-email-michael.chan@broadcom.com
State New
Headers show
Series bnxt_en: Bug fixes. | expand

Commit Message

Michael Chan Oct. 26, 2020, 4:18 a.m. UTC 
From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

In the AER or firmware reset flow, if we are in fatal error state or
if pci_channel_offline() is true, we don't send any commands to the
firmware because the commands will likely not reach the firmware and
most commands don't matter much because the firmware is likely to be
reset imminently.

However, the HWRM_FUNC_RESET command is different and we should always
attempt to send it.  In the AER flow for example, the .slot_reset()
call will trigger this fw command and we need to try to send it to
effect the proper reset.

Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 0165f70dba74..7975f59735d6 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4352,7 +4352,8 @@  static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len,
 	u32 bar_offset = BNXT_GRCPF_REG_CHIMP_COMM;
 	u16 dst = BNXT_HWRM_CHNL_CHIMP;
 
-	if (BNXT_NO_FW_ACCESS(bp))
+	if (BNXT_NO_FW_ACCESS(bp) &&
+	    le16_to_cpu(req->req_type) != HWRM_FUNC_RESET)
 		return -EBUSY;
 
 	if (msg_len > BNXT_HWRM_MAX_REQ_LEN) {