@@ -24,6 +24,7 @@ Required properties:
* "sata-phy" for the SATA 6.0Gbps PHY
Optional properties:
+- dma-coherent : Present if dma operations are coherent
- status : Shall be "ok" if enabled or "disabled" if disabled.
Default is "ok".
@@ -55,6 +56,7 @@ Example:
<0x0 0x1f22e000 0x0 0x1000>,
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy2 0>;
@@ -69,6 +71,7 @@ Example:
<0x0 0x1f23e000 0x0 0x1000>,
<0x0 0x1f237000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy3 0>;
@@ -307,6 +307,7 @@
<0x0 0x1f21e000 0x0 0x1000>,
<0x0 0x1f217000 0x0 0x1000>;
interrupts = <0x0 0x86 0x4>;
+ dma-coherent;
status = "disabled";
clocks = <&sata01clk 0>;
phys = <&phy1 0>;
@@ -321,6 +322,7 @@
<0x0 0x1f22e000 0x0 0x1000>,
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sata23clk 0>;
phys = <&phy2 0>;
@@ -334,6 +336,7 @@
<0x0 0x1f23d000 0x0 0x1000>,
<0x0 0x1f23e000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sata45clk 0>;
phys = <&phy3 0>;
Since the default DMA ops for arm64 are non-coherent, mark the X-Gene controller explicitly as dma-coherent to avoid additional cache maintenance. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Loc Ho <lho@apm.com> --- Documentation/devicetree/bindings/ata/apm-xgene.txt | 3 +++ arch/arm64/boot/dts/apm-storm.dtsi | 3 +++ 2 files changed, 6 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html