diff mbox series

[1/6] dt-bindings: tas2770: Add shutdown gpio property

Message ID 20200923132600.10652-1-dmurphy@ti.com
State Accepted
Commit 29d7b36ce98eb1bfba2c5c9b2ea0d58ff778a2d4
Headers show
Series [1/6] dt-bindings: tas2770: Add shutdown gpio property | expand

Commit Message

Dan Murphy Sept. 23, 2020, 1:25 p.m. UTC 
Add the shutdown-gpios property to the yaml to define the GPIO that can
be used to place the device in shutdown mode or wake the device up.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 Documentation/devicetree/bindings/sound/tas2770.yaml | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index bb26d081c9fa..9fdf614add55 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -29,6 +29,9 @@  properties:
   reset-gpio:
     description: GPIO used to reset the device.
 
+  shutdown-gpios:
+    description: GPIO used to control the state of the device.
+
   interrupts:
     maxItems: 1
 
@@ -69,6 +72,7 @@  examples:
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 14 0>;
        ti,imon-slot-no = <0>;
        ti,vmon-slot-no = <2>;
      };