diff mbox series

[v9,13/13] arm64: defconfig: enable the sl28cpld board management controller

Message ID 20200907213802.26745-14-michael@walle.cc
State Accepted
Commit c80bcf19e0c56dade92501cfcb08ab0911110272
Headers show
Series Add support for Kontron sl28cpld | expand

Commit Message

Michael Walle Sept. 7, 2020, 9:38 p.m. UTC
Enable the kernel modules for the board management controller "sl28cpld"
which is used on the SMARC-sAL28 board.

Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v8:
 - none

Changes since v7:
 - added new virtual symbol CONFIG_MFD_SL28CPLD

Changes since v6:
 - none

Changes since v5:
 - new patch

 arch/arm64/configs/defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 39b409eef0b1..c2ae4e8cd7c2 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -507,6 +507,7 @@  CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
+CONFIG_GPIO_SL28CPLD=m
 CONFIG_POWER_AVS=y
 CONFIG_QCOM_CPR=y
 CONFIG_ROCKCHIP_IODOMAIN=y
@@ -520,6 +521,7 @@  CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
+CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
@@ -542,6 +544,7 @@  CONFIG_QCOM_TSENS=y
 CONFIG_QCOM_SPMI_TEMP_ALARM=m
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_WATCHDOG=y
+CONFIG_SL28CPLD_WATCHDOG=m
 CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_ARM_SMC_WATCHDOG=y
@@ -567,6 +570,7 @@  CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SL28CPLD=y
 CONFIG_MFD_ROHM_BD718XX=y
 CONFIG_MFD_WCD934X=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -966,8 +970,10 @@  CONFIG_PWM_MESON=m
 CONFIG_PWM_RCAR=m
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_SL28CPLD=m
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_SL28CPLD_INTC=y
 CONFIG_QCOM_PDC=y
 CONFIG_RESET_IMX7=y
 CONFIG_RESET_QCOM_AOSS=y